LW.A - Vibration-damping levelling elements -Steel base and stem
- Volume Discount
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
LW.A / Vibration-damping Levelling Elements, Steel Base and Stem
Features
- malfunctioning and reduction of the machine lifespan and/or of the adjacent ones;
- damage to operator's health;
- noise.
Material
Base
Damping Element
Levelling Plate
Packing Ring
Threaded Stem
Nut and Washer
Specifications
| Code | Description | D | d | D1 | L | L1 min÷max | l | l1 | d2 | s | Max. limit static load [N] | Stiffness [N/mm] | Max. deflection [mm] | Weight |
| 415111 | LW.A-80-M12x1.25x120 | 80 | M12 x 1.25 | 72 | 133 | 35÷46 | 18.5 | 32 | 60 | 7x7 | 5000 | 2500 | 2 | 530 |
| 415121 | LW.A-120-M16x1.5x130 | 120 | M16 x 1.5 | 109 | 144 | 40÷51 | 23 | 36.5 | 80 | 9x9 | 10000 | 4000 | 2.5 | 1200 |
| 415131 | LW.A-160-M20x1.5x170 | 160 | M20 x 1.5 | 150 | 188 | 50÷63 | 29 | 43.5 | 130 | 12x12 | 20000 | 9000 | 2.2 | 2650 |
| 415141 | LW.A-200-M20x1.5x170 | 200 | M20 x 1.5 | 186 | 198 | 60÷73 | 36 | 54.5 | 130 | 12x12 | 40000 | 15000 | 2.7 | 4500 |
Assembly Instructions
- Turn the square end of the stem to take the levelling plate in contact with the machine thus obtaining the levelling required. Then lock with nut and washer (fig.2)
Technical Data and Guidelines for the Choice
- disturbing frequency: the frequency of the disturbing vibration produced by a on-duty machine. In general, it is obtained by the number of rotations of the engine [Hz=r.p.m./60];
- the load applied to every single vibration-damping element [N];
- the isolation degree required [%];
- the deflection value of the vibration-damping element under a given load [mm];
- the rigidity, that is to say the load that applied to the vibration-damping element produces a deflection of 1.0 mm [N/mm].
2. How to choose the vibration-damping element:
- with reference to the diagram for checking the isolation degree, intersect the disturbing frequency value with the isolation degree required (each isolation degree corresponds to a line in the diagram) and define the deflection [in mm];
- divide the load applied onto the vibration-damping element by the deflection value to obtain the required rigidity of the vibration-damping element;
- compare the rigidity obtained with the rigidity shown in the table and choose the vibration-damping element which presents the nearest value (lower) to the calculated one.
3. Check:
- the deflection of the vibration-damping element chosen can be obtained in the graph on the basis of the load;
- intersect the disturbing frequency value with the vibration-damping element deflection value in the diagram to obtain the isolation degree offered by the vibration-damping element chosen;
- compare the obtained value with the isolation degree required.
4. Example:
Conditions of use: disturbing frequency = 50 Hz (3,000 r.p.m.); load applied to every levelling element = 4,000 N; a 80% isolation degree is required;
- diagram shows that with a 50 Hz disturbing frequency and an isolation degree of 80%, the deflection obtained is 0.6 mm;
- divide the load applied by the deflection obtained to define the rigidity required, which is 4,000/0.6= 6,666 N/mm;
- compare the rigidity value obtained (6,666 N/mm) with the values reported in the table. This value is within the rigidity value reported in the table for LW.A-120 (4,000 N/mm) and LW.A-160 (9,000 N/mm). Choose the vibration-damping element with the lower value that is LW.A-120.
For a further check:
- graph shows that LW.A-120 (4,000 N/mm) deflection is 1mm.
- by intersecting the deflection value with the disturbing frequency of 50 Hz in the diagram, the isolation degree obtained is 90%.
This value is even greater than the required one; your choice has proved to be correct.
Part Number
|
|---|
| 415111 |
| 415121 |
| 415131 |
| 415141 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | D | D1 | d | d2 | L | l | l1 | L1 min÷max | s | Max.limit static load (N) | Max.deflection (mm) | Stiffness (N/mm) | Threaded screw | Code | Description | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
45.41 € | 1 | Available | 25 Days | 80 | 72 | M12x1.25 | 60 | 133 | 18.5 | 32 | 35÷46 | 7x7 | 5000 | 2 | 2500 | M12 | 415111 | LW.A-80-M12x1.25x120 | |
62.50 € | 1 | Available | 4 Days | 120 | 109 | M16x1.5 | 80 | 144 | 23 | 36.5 | 40÷51 | 9x9 | 10000 | 2.5 | 4000 | M16 | 415121 | LW.A-120-M16x1.5x130 | |
109.91 € | 1 | Available | 1 Day | 160 | 150 | M20x1.5 | 130 | 188 | 29 | 43.5 | 50÷63 | 12x12 | 20000 | 2.2 | 9000 | M20 | 415131 | LW.A-160-M20x1.5x170 | |
198.88 € | 1 | Available | 1 Day | 200 | 186 | M20x1.5 | 130 | 198 | 36 | 54.5 | 60÷73 | 12x12 | 40000 | 2.7 | 15000 | M20 | 415141 | LW.A-200-M20x1.5x170 |
Loading...
Basic information
| Material | Rubber-Steel |
|---|
Configure
Basic Attributes
-
D
- 80
- 120
- 160
- 200
-
D1
- 72
- 109
- 150
- 186
-
d
- M12x1.25
- M16x1.5
- M20x1.5
-
d2
- 60
- 80
- 130
-
L
- 133
- 144
- 188
- 198
-
l
- 18.5
- 23
- 29
- 36
-
l1
- 32
- 36.5
- 43.5
- 54.5
-
L1 min÷max
- 35÷46
- 40÷51
- 50÷63
- 60÷73
-
s
- 7x7
- 9x9
- 12x12
-
Max.limit static load(N)
- 5000
- 10000
- 20000
- 40000
-
Max.deflection(mm)
- 2
- 2.2
- 2.5
- 2.7
-
Stiffness(N/mm)
- 2500
- 4000
- 9000
- 15000
-
Threaded screw
- M12
- M16
- M20
-
Code
- 415111
- 415121
- 415131
- 415141
-
Type
- 415
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 1 Day or Less
- 4 Days or Less
- 25 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.