Diamond Electroplating Wheel for Both Cutting and Polishing
[Features]
- For both cutting and polishing.
Offset type.
- Electrodeposited diamond on front and back sides of the plate to allow cutting and polishing simultaneously.
For finish polishing.
[Applications]
- For cutting and polishing of tiles, marble, FRP, firebrick, glass and granite.
Tool used: disc grinder.
- For both cutting and polishing.
Offset type.
- Electrodeposited diamond on front and back sides of the plate to allow cutting and polishing simultaneously.
For finish polishing.
[Applications]
- For cutting and polishing of tiles, marble, FRP, firebrick, glass and granite.
Tool used: disc grinder.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
UFO-2
Basic information
| Particle Size(#) | 60 | Outer Diameter(mm) | 100 | Thickness(mm) | 14 |
|---|---|---|---|---|---|
| Hole Diameter(mm) | 15 | Max. Rotational Speed(rpm) | 15000 | Trusco Code | 171-4457 |
| Mass(g) | 91.8 | Features | For cutting and polishing. It is offset type. It is possible to electrodeposit, cut and polish diamonds on the front and back of the board at the same time. For final polishing. | Application | Polishing/cutting of roof tile, marble, FRP, refractory brick, glass, granite, etc. Tool used: Disc grinder. |
This page is Diamond Electroplating Wheel for Both Cutting and Polishing, part number UFO-2.
You can find the detail information about specifications and dimensions on part number UFO-2.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.