Chamfering / Centering Tools（Application：Chamfering/Horizontal）

?* Information on days to ship and prices

• 

  Spot Drill Insert

  NINE9

  Insert for NC spot drill holders.

  Select to compare

  › Configure now
  Starting from∗ ：	39.57 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Momimen

  FUJIGEN

  [Features]
  · Only one tool needed for both gouging and C-chamfering. Improves productivity by helping reduce the number of tools used in ATC tool changes.
  · The dedicated tip has a unique shape, eliminating the risk of vibration and damage.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	150.26 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  HSS SP Center 60° TiCN Coating

  IWATA TOOL

  [Features]
  · Accuracy, machining speed, and cost performance are balanced.
  · Newly shaped HSS centering tool.
  · Long life with a blade tip that doesn't easily chip.
  · Double angle point prevents chipping of the tip.
  · No tip breakage, unlike conventional center drills.
  · The high torsion design provides excellent sharpness.
  · Improved Surface Roughness

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	16.74 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Aero Mill (Positive Type) / Kame Cutter / Tip for Nice Corner F3

  FUJIGEN

  Tip materials are cermet / K10 class carbide / M20 class carbide / micro grain carbide.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	15.95 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Mini Momi

  FUJIGEN

  [Features]
  · Only one tool needed for both gouging and C-chamfering. Improves productivity by helping reduce the number of tools used in ATC tool changes.
  · The dedicated tip has a unique shape, eliminating the risk of vibration and damage.

  Select to compare

  › Configure now
  Starting from∗ ：	157.85 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  60° Momimen

  FUJIGEN

  [Features]
  · A throw-away type requiring only a tip change (no tool correction required).
  · This tool allows C-chamfering and conical gouging, while reducing the number of tools used in ATC tool changes, and improving machining speed and productivity.
  · The shank diameter is φ16 and the cutting edge diameter is φ12, making it suitable for 60° chamfering in tight spaces.

  Select to compare

  › Configure now
  Starting from∗ ：	192.95 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Counter Sink (Titanium Coating)【1-6 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Characteristics]
  Uses cobalt high speed steel as its base metal for excellent abrasion and heat resistance.
  Surface hardening is high thanks to its surface titanium coating finish, with improved heat-resistance, wear-resistance and sharpness compared to cobalt high-speed steel.
  Uses a 3-flute blade edge shape for good cutting chip discharge, giving a clean finish.
  [Application]
  Work Material: Iron, Cast Material, Stainless Steel.
  Chamfering.
  Deburring.
  Countersinking.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	31.81 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  C-Cutter Boy

  BIG KAISER

  [Features]
  Ideal for chamfering work using a tabletop drilling machine.
  Clean chamfering can be done using carbide throw-away tips.
  The carbide guide prevents chattering to allow work to be carried out easily by anyone.

  Select to compare

  › Configure now
  Starting from∗ ：	169.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  2-Flute Spiral Chamfering Cutter (for Steel / Aluminum Alloy) CA-SCC

  OSG

  By adopting of sharp high helix, clean working surface with less burr can be obtained.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	81.19 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  HSS SP Center 60°

  IWATA TOOL

  [Features]
  · Accuracy, machining speed, and cost performance are balanced.
  · Newly shaped HSS centering tool.
  · Long life with a blade tip that doesn't easily chip.
  · Double angle point prevents chipping of the tip.
  · No tip breakage, unlike conventional center drills.
  · The high torsion design provides excellent sharpness.
  · Improved Surface Roughness

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	10.21 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  HSS SP Center 90° TiCN Coating

  IWATA TOOL

  [Features]
  · Accuracy, machining speed, and cost performance are balanced.
  · Newly shaped HSS centering tool.
  · Long life with a blade tip that doesn't easily chip.
  · Double angle point prevents chipping of the tip.
  · No tip breakage, unlike conventional center drills.
  · The high torsion design provides excellent sharpness.
  · Improved Surface Roughness

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	16.26 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Tips for Chibimomi C22GUX

  FUJIGEN

  An insert for Chibimomi that can be used for centring and chamfering.
  [Features]Used for centring holes, chamfering countersinks and chamfering edges.

  Select to compare

  › Configure now
  Starting from∗ ：	27.37 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Multi-Angle Mill Tip

  FUJIGEN

  An insert for multi-angle cutters.
  [Features]Used for chamfering.

  Select to compare

  › Configure now
  Starting from∗ ：	32.60 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  C-Cutter Mini, 1-Flute Front-Chamfering Type

  BIG KAISER

  [Features]
  · 1-flute type front chamfering "C-Cutter Mini" high performance chamfering cutter that achieves ultra-high feed rates and a compact size.
  · Ultra-high feed machining achieves dramatic reductions in chamfering time.

  Select to compare

  › Configure now
  Starting from∗ ：	97.50 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  C-Cutter, Straight Shank

  BIG KAISER

  [Features]
  · Aggregation of chamfering tools is enabled with the C-Cutter, suitable for a wide range of applications.
  · A dedicated design for chamfering, this insert has a large rake angle and provides beautiful chamfering.
  · The wide machining range can reduce the number of tools inside the magazine to greatly improve the ATC loss time.

  Select to compare

  › Configure now
  Starting from∗ ：	102.92 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  CMC MC Chamfering Cutter G2

  ASAHI TOOLS

  Soldering shape, Angle tolerance ±15'.
  Shape accuracy with straight edge.
  Applications, Hole chamfering/bevelling/horizontal run Work material, General steel/heat treated steel/stainless steel/cast iron/aluminium/copper/resin
  Single-edged blade
  2 blades.

  Select to compare

  › Configure now
  Starting from∗ ：	103.49 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Mini Corner R Cutter (Half) MCRC

  EIKOSHA

  Select to compare

  › Configure now
  Starting from∗ ：	82.64 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank

  SANDVIK

  Select to compare

  › Configure now
  Starting from∗ ：	116.80 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  MUGEN Coating C Chamfer Cutter NSCV-M

  NS TOOL

  [Features]
  · Enables easy C chamfering.
  · Uses MUGEN coating that dramatically improves the durability.
  

  Select to compare

  › Configure now
  Starting from∗ ：	111.08 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°

  MAKOTOLOY

  [Features]
  · A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
  · The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
  · Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
  · An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
  · Standard type.

  Select to compare

  › Configure now
  Starting from∗ ：	93.69 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  TS coated carbide chamfer, V grooving end mill, 2-flute

  MISUMI

  [Features]
  -Ideal for chamfers and V-grooves
  -It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
  -Can be reground. Please refer to the "Regrinding Service" page for application methods, performance range, prices, delivery times, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  Select to compare

  › Configure now
  Starting from∗ ：	71.59 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model

  MISUMI

  Ideal for the Deep Chamfering of Workpieces

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  Select to compare

  › Configure now
  Starting from∗ ：	48.89 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TS coated carbide chamfering end mill, 2-flute / 15° spiral

  MISUMI

  [Features]
  -The hard-to-machine flute tip and the shape that facilitates chip evacuation allow machining from positioning ( = centering) to chamfering with a single tool
  -The coating has high oxidation resistance and high hardness and achieves long tool life. Effective in high-speed machining and dry machining as coating properties
  -Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  Select to compare

  › Configure now
  Starting from∗ ：	42.10 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TS coated carbide chamfering end mill, 2-flute / short model

  MISUMI

  [Features]
  -Ideal for chamfering. Can also be used as a deburring tool
  -Since it has circumferential grooves, it is possible to perform bevel, contour and oblique cutting
  -Since the circumferential grooves have a bevel angle, it is possible to machine as shown in the figure above
  -It has a coating with high oxidation resistance and high hardness, and achieves a long service life. Effective in high-speed machining and dry machining as coating properties
  -Can be reground. Please refer to the "Regrinding Service" page for how to use the product, its performance, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  Select to compare

  › Configure now
  Starting from∗ ：	38.81 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TS coated carbide chamfering end mill, 3-flute / short model

  MISUMI

  [Features]
  -Ideal for chamfering (V-groove is not possible as the tip has no cutting groove).
  -Peripheral grooves allow bevel, contour and spiral cutting
  -The 3-groove shape allows feed rate improvement to the 1st step. The 3-flute shape enables up to 1.5 times the feed rate compared to the 2-flute type
  -With helix angle on peripheral flutes
  -Can also be used as a deburring tool
  -It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  Select to compare

  › Configure now
  Starting from∗ ：	46.59 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade

  MISUMI

  The helix flute suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.

  • Volume Discount

  • TS
  • SUS
  • 2 Flutes

  Select to compare

  › Configure now
  Starting from∗ ：	74.67 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral

  MISUMI

  Capable of everything from positioning to chamfering in a single shot

  • Volume Discount

  • Non-Coated
  • Aluminum
  • 2 Flutes

  Select to compare

  › Configure now
  Starting from∗ ：	40.79 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide Chamfering End Mill for Aluminum Machining, 2-Flute

  MISUMI

  The sharp helix blade achieves the clean machined surface with less burr

  • Volume Discount

  • Non-Coated
  • Aluminum
  • 2 Flutes

  Select to compare

  › Configure now
  Starting from∗ ：	72.54 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short

  MISUMI

  The chamfer angle can be selected from 60, 90 and 120°according to the machining style

  • Volume Discount

  • TiCN
  • 2 Flutes
  • S (Short)

  Select to compare

  › Configure now
  Starting from∗ ：	57.90 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  High-Speed Steel Chamfering End Mill, 2-Flute / Short

  MISUMI

  Chamfering end mill with the angle that can be freely selected in 1° increments

  • Non-Coated
  • 2 Flutes
  • S (Short)

  Select to compare

  › Configure now
  Min. Shipping Days ：	7 Days

• 

  XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type

  MISUMI

  [Features]
  ・Popular 3-flute type for helix angle chambering with high feed rate.
  ・Ideal for chamfering.(V-groove machining is not possible because there is no cutting edge at the tip)
  ・Since it has an outer peripheral flute, it can perform inclined contours and helical cutting.
  ・With the 3-flute shape, the feed can be increased up to 1.5 times that of the 2-flute type.
  ・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible.
  ・It can also be used as a deburring tool.
  ・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	64.97 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type

  MISUMI

  [Features]
  ・Popular chamfering product with helix angle.
  ・Since it has a peripheral flute, it can be used for tilting, contouring and helical cutting.
  ・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible. It can also be used as a deburring tool.
  ・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	39.98 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle

  MISUMI

  [Features]
  ・Machining from positioning to chamfering with a single tool.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	42.61 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  XAL Series Carbide Chamfer End Mill 2-Flute

  MISUMI

  [Features]
  ・Recommended for chamfering general steel.
  ・Ideal for chamfering and V-groove machining.
  ・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	33.33 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type

  MISUMI

  [Features]
  ・Recommended for deep section chamfering of general steel.
  ・Ideal for chamfering and V-groove machining.
  ・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
  ・The long type is ideal for deep cavity milling.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	43.97 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type

  MISUMI

  [Features]
  ・The popular high hardness steel chamfer end mill is even more affordable.
  ・Ideal for chamfering high hardness steel up to 65 HRC. (V-groove machining is not possible because there is no cutting edge at the tip)
  ・High-efficiency machining is possible by adopting a 6-flute shape.
  ・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.
  ・The finish of the surface roughness of the workpiece after machining is very good.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	42.86 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  2-Flute Spiral Chamfering Cutter FX-SCC

  OSG

  By adopting of sharp high helix, clean working surface with less burr can be obtained.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	88.29 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  2-Flute Long Shank Spiral Chamfering Cutter FX-LS-SCC

  OSG

  Long shank type suited for working deep section. Does not generate chatter even with large extruding amounts due to use of twisted blade.

  Select to compare

  › Configure now
  Starting from∗ ：	84.50 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  2-Flute Long Shank Spiral Chamfering Cutter (for Steel / Aluminum) CA-LS-SCC

  OSG

  Long shank type suited for working deep section. Does not generate chatter even with large extruding amounts due to use of twisted blade.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	87.63 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  3-Flute, Chamfering Cutter (Negative Type) HSCT-N

  OSG

  End mill for negative chamfering. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	73.17 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  3-Flute, Chamfering Cutter (Positive Type) HSCT-P

  OSG

  End mill for positive chamfering. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	73.51 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  3-Flute Long Shank Chamfering Cutter (Negative Type) LS-HSCT-N

  OSG

  End mill for negative chamfering, long shank type. It suppresses chatter during machining and has good chip evacuation for a nice surface finish.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	78.36 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  3-Flute Long Shank Chamfering Cutter (Positive Type) LS-HSCT-P

  OSG

  Positive chamfer cutter with long shank. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	78.36 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Spiral Chamfering Cutter for SV Chamfering Process

  UNION TOOL

  [Features]
  · Carbide spiral chamfering cutter
  · Half Taper Angle of 45°
  · The external blade is a torsion type that limits the occurrence of burrs when compared with the straight blade type.

  Select to compare

  › Configure now
  Starting from∗ ：	135.77 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  High Speed Chamfering Series, V-Coated XPM 2-Flute Chamfering Cutters

  OSG

  By adopting of sharp high helix, clean working surface with less burr can be obtained.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	44.76 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

Loading...