Damper Hinges, Spring Hinges（Additional Function：With Damper）

?* Information on days to ship and prices

• 

  Rotary dampers / flange type / bidirectional, unidirectional / FRT / FRN-C2 series / FUJI LATEX

  FUJI LATEX

  This small damper is available in 2 types of torque, one that works in both directions and the other in one direction. We also offer both types with and without gear.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	3.63 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Damper Hinges (Zinc Die-Cast)

  MISUMI

  It is a hinge to which a reverse torque is applied and which reduces the load during opening and closing.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Min. Shipping Days ：	6 Days

• 

  Rotary dampers / flanged / unidirectional / FRN-P2 series / FUJI LATEX

  FUJI LATEX

  This damper is a unidirectional rotary damper with adjustable torque. Also, the gears attached to the damper are available in 2 types.
  
  [Features]
  · The torque of the rotary damper changes according to the rotation speed.
  · Generally, the torque increases as the rotation speed increases, and decreases as the rotation speed decreases.
  · Regarding the torque value of the catalog, 20rpm is the torque value at the time of rotation.
  · In addition, the torque at startup is slightly different from the rated torque.
  · The torque of the rotary damper varies according to the operating environment temperature.
  · In general, the torque decreases as the temperature rises, and rises as the temperature decreases.
  · This is because the viscosity of the oil inside the damper is affected by the temperature change, hence when the temperature returns to normal, the torque also returns to its original value

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	36.48 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rotary dampers / flange type / bidirectional, unidirectional / FYT / FYN-LA3 series / FUJI LATEX

  FUJI LATEX

  This is an adjustable metal (zinc die-cast) oscillating damper that can accommodate a wide damping constant. Also, there are 2 types of characteristics, one-directional and bidirectional.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	190.45 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rotary dampers / flange type / bidirectional, unidirectional / FDT-47A / FDN-47A series / FUJI LATEX

  FUJI LATEX

  This disc damper has high torque, a thin, space saving shape, and its appearance is metallic. This small damper is available in 2 types of torque, one that works in both directions and the other in one direction.
  
  [Features]
  · The torque of the disc damper changes according to the rotation speed.
  · Generally, the torque increases as the rotation speed increases, and decreases as the rotation speed decreases.
  · Regarding the torque value of the catalog, 20rpm is the torque value at the time of rotation.
  · When using the rotational fall of the cover, the rotation speed is slow at the initial stage of dropping and only torque less than the rated torque value is generated.
  · The damper torque value (catalog rated torque value) varies according to the operating environment temperature.
  · The torque decreases as the temperature rises, and rises as the temperature decreases.
  · The viscosity of the oil inside the damper is affected by the temperature change, hence when the temperature returns to normal the torque also returns to the original value

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	19.52 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rotary dampers / flange type / bidirectional, unidirectional / FDT-57A / FDN-57A series / FUJI LATEX

  FUJI LATEX

  This damper has high torque, a thin space saving shape, and a metal appearance. This small damper is available in 2 types of torque, one that works in both directions and the other in one direction.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	20.26 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rotary dampers / flanged / bidirectional / TD102 / TOK BEARING

  TOK BEARING

  [Features]
  · Ultra-compact, ultra-thin damper.
  · Bidirectional endless damper.
  · Small standard shape.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	1.28 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rotary dampers / flange shape / bidirectional / FRT-G2 series / FUJI LATEX

  FUJI LATEX

  This damper is a low cost, compact and thin rotary damper. We also have 3 types of geared and non-geared types available.
  
  [Features]
  · Velocity characteristics: The torque of the rotary damper changes according to the rotation speed.
  · Generally, the torque increases as the rotation speed increases, and decreases as the rotation speed decreases.
  · In addition, the torque at startup is slightly different from the rated torque.
  · Temperature characteristics: The torque of the rotary damper varies according to the operating environment temperature.
  · In general, the torque decreases as the temperature rises, and rises as the temperature decreases.
  · This is because the viscosity of the silicone oil inside the damper is affected by the temperature change.
  · However, when the temperature returns to normal temperature, the torque returns to its original value

  • Volume Discount

  • Stock

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	1.81 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rotary dampers / flanged Shape / TD88 / TOK BEARING

  TOK BEARING

  Disposable, compact and durable. Main body type Rotation type, Operating environment Standard, Main body material Resin, Additional function With damper, Opening angle θ (deg) 360, Mounting method Screw mounting, Mounting screw hole type Round hole.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	8.14 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rotary dampers / flange type / bidirectional, unidirectional / FRT / FRN-D2 series / FUJI LATEX

  FUJI LATEX

  This small damper is available in 2 types of torque, one that works in both directions and the other in one direction. We also offer both types with and without gear.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	9.06 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rotary dampers / TD14 / TOK BEARING

  TOK BEARING

  Demonstrates demonstrative solo down. Main body type Rotary type, Operating environment, Standard, Main body material Resin, Additional function With damper, Opening angle θ (deg) 110.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	12.94 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Torque hinges / damping function / -10° +180°, +190° / PP / BP-879-1H / TAKIGEN

  TAKIGEN

  BP-879 dedicated holder.
  
  [Features]
  · Inside the hinge, the 2 pieces BP-879-1 and B-879-1 are combined.
  · Various settings can be done, like reciprocating damper type, one direction damper type, etc.
  ·The damper have to be ordered separately

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	10.49 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rotary dampers / flanged / bidirectional / FRT-E2 / E9 series / FUJI LATEX

  FUJI LATEX

  This damper is a low cost, compact and thin geared rotary damper, and it can be installed in a space-saving manner.
  
  [Features]
  · The torque of the rotary damper changes according to the rotation speed.
  · Generally, the torque increases as the rotation speed increases, and decreases as the rotation speed decreases.
  · In addition, the torque at startup is slightly different from the rated torque.
  · The torque of the rotary damper varies according to the operating environment temperature.
  · In general, the torque decreases as the temperature rises, and rises as the temperature decreases.
  · This is because the viscosity of the silicone oil inside the damper is affected by the temperature change.
  · However, when the temperature returns to normal temperature, the torque returns to its original value

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	1.81 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Rotary dampers / flange type / bidirectional, unidirectional / FRT / FRN-K2 series / FUJI LATEX

  FUJI LATEX

  High torque rotary damper that is easy to install. Available in both types of torque, one that works in both directions and the other in one direction.
  
  [Features]
  · Velocity characteristics: The torque of the rotary damper changes according to the rotation speed.
  · Generally, the torque increases as the rotation speed increases, and decreases as the rotation speed decreases.
  · In addition, the torque at startup is slightly different from the rated torque.
  · Temperature characteristics: The torque of the rotary damper varies according to the operating environment temperature.
  · In general, the torque decreases as the temperature rises, and rises as the temperature decreases.
  · This is because the viscosity of the silicone oil inside the damper is affected by the temperature change.
  · However, when the temperature returns to normal temperature, the torque returns to its original value

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	29.57 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rotary dampers / TD73 / TOK BEARING

  TOK BEARING

  [Features]
  · Smallest diameter damper by the manufacturer (about 2/3 of conventional products).
  · Slim and ultra-compact shape with outer diameter ø 11 [mm] (manufacturer's smallest diameter damper), housing length 22 [mm], maximum torque 0.29N/m (3kgf/ cm) achieved.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	3.58 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rotary dampers / hexagonal / BP-879 / TAKIGEN

  TAKIGEN

  [Features]
  · Appropriate damper characteristics can be obtained within the rotation range (in the direction of the arrow) of 180° (rotation in the reverse direction of the arrow is no load).
  · Due to the compact hexagonal shape, setting it into the door is easy.
  · Damper characteristics: closing time 10 ± 5 seconds.
  · In a tolerance test of 100,000 repetitions (at normal temperature), closing time is more than 2.5 seconds.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	11.97 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rotary dampers / flange type / bidirectional, unidirectional / FDT-63A / FDN-63A series / FUJI LATEX

  FUJI LATEX

  This damper has high torque, a thin space saving shape, and a metal appearance. This small damper is available in 2 types of torque, one that works in both directions and the other in one direction.
  
  [Features]
  · Velocity characteristics.
  · The torque of the disc damper changes according to the rotation speed.
  · As per the figure below, generally, the torque increases as the rotation speed increases, and decreases as the rotation speed decreases.
  · Regarding the torque value of the catalog, 20rpm is the torque value at the time of rotation.
  · When using the rotational fall of the cover, the rotation speed is slow at the initial stage of dropping and only torque less than the rated torque value is generated.
  · Temperature characteristics.
  · The damper torque value (catalog rated torque value) varies according to the operating environment temperature.
  · The torque decreases as the temperature rises, and rises as the temperature decreases.
  · This is because the viscosity of the oil inside the damper is affected by the temperature change, hence when the temperature returns to normal, the torque also returns to its original value.
  · Temperature characteristics graph is as shown in the figure

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	22.44 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rotary dampers / flanged / unidirectional / FFD-25FS / FW / SS / SW-Series / FUJI LATEX

  FUJI LATEX

  This damper is small and space saving, and is a unidirectional resin friction type damper that can be installed easily. In addition, no oil is used in this damper.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	16.39 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Torque hinges / zinc / FHD-A1 Series / FUJI LATEX

  FUJI LATEX

  As this damper is in the shape of a hinge, it is easy to install and corresponds to both opening direction and closing direction. In addition, it can not be used for vertical use.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	69.90 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rotary dampers / unidirectional / FYN-U1 series / FUJI LATEX

  FUJI LATEX

  This damper is a unidirectional metal (zinc die-cast) oscillating damper that has high torque performance with an outer diameter of ø16 mm.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	13.24 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rotary dampers / flanged / 180° / TD38 / TOK BEARING

  TOK BEARING

  [Features]
  · Opening/closing angle of 180° achieved.
  · The damper can be fixed firmly with screws, and is easy to install.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	11.13 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rotary dampers / TD75 / TOK BEARING

  TOK BEARING

  [Features]
  · outer diameter ø11 with maximum torque 0.29N/m (3kgf/ cm) achieved.
  · Slim (small and lightweight) 180° open/close type.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	3.77 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Torque hinges / damping function / -10° +180°, +190° / zinc die-cast / stove-enamelled / B-879-1H / TAKIGEN

  TAKIGEN

  Dedicated holder for B-879BP-879.
  
  [Features]
  · Inside the hinge, the 3 pieces BP-879-1 and B-879-1 are combined.
  · Various settings can be done, like reciprocating damper type, one direction damper type, etc.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	23.04 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rotary dampers / flange type / bidirectional, unidirectional / FRT / FRN-F2 series / FUJI LATEX

  FUJI LATEX

  [Features]
  · High torque rotary damper that is easy to install.
  · Available in both types of torque, one that works in both directions and the other in one direction.
  · FRT Is a fixed shaft type.
  · The axis of FRN is not fixed.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	28.29 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rotary dampers / unidirectional / FYN-P1 series / FUJI LATEX

  FUJI LATEX

  This damper is unidirectional resin oscillating damper that has a high torque performance while being compact at ø18.5 mm in outer shape.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	9.49 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Rotary dampers / flange type / unidirectional / FYN-S1 series / FUJI LATEX

  FUJI LATEX

  This damper is a high-torque type metal (zinc die-cast) oscillating damper. In addition, even if the load changes, the same kind of movement is achieved due to the self-adjusting characteristics.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	39.37 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Rotary dampers / flange type / bidirectional, unidirectional / FYT / FYN-H1 (H2) series / FUJI LATEX

  FUJI LATEX

  This damper is a metal (zinc die-cast) oscillating damper that can adjust characteristics, with high torque. In addition, there are 2 types of characteristics, unidirectional and bi-directional.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	31.78 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Damper Hinges (PBT)

  MISUMI

  [Features] A hinge to which a reverse torque is applied and which reduces the load during opening and closing.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	19.39 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rotary dampers / unidirectional / FFD-30FS / FW / SS / SW series / FUJI LATEX

  FUJI LATEX

  This damper is small and space saving, and is a unidirectional resin friction type damper that can be installed easily. In addition, no oil is used in this damper.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	16.42 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rotary dampers / flanged / bidirectional / FRT-L1 series / FUJI LATEX

  FUJI LATEX

  This rotary damper is small yet the torque is high, with a flange that makes installation easier.
  
  [Features]
  · The torque of the rotary damper changes according to the rotation speed.
  · Generally, the torque increases as the rotation speed increases, and decreases as the rotation speed decreases.
  · In addition, the torque at startup is slightly different from the rated torque.
  · The torque of the rotary damper varies according to the operating environment temperature.
  · In general, the torque decreases as the temperature rises, and rises as the temperature decreases.
  · This is because the viscosity of the silicone oil inside the damper is affected by the temperature change.
  · However, when the temperature returns to normal temperature, the torque returns to its original value

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	12.06 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rotary dampers / flanged / unidirectional / FYN-K1 series / FUJI LATEX

  FUJI LATEX

  This damper is a high-torque resin oscillating damper with unidirectional characteristics. Also, it is easy to install.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	17.90 €
  Min. Shipping Days ：	93 Days

  *Unit price with basic configuration

• 

  Rotary dampers / flanged / unidirectional / FYN-M1 series / FUJI LATEX

  FUJI LATEX

  The torque of this type of damper is strong at the beginning of movement, and becomes weak at the end. This oscillating damper works well with a light door like the flap door on a vending machine.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	6.61 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rotary dampers / flange type / bidirectional, unidirectional / FYT / FYN-D1 (D2) series / FUJI LATEX

  FUJI LATEX

  This damper is a high-torque type metal (zinc die-cast) oscillating damper. In addition, there are 2 types of characteristics, unidirectional and bi-directional.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	30.61 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rotary dampers / standard / TD27 / 28 / TOK BEARING

  TOK BEARING

  [Features]
  · With torque adjustment equipment, torque adjustment is easy.
  · Combined with a dedicated blanket, it can be used as a hinge.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	28.62 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rotary dampers / TD56 / TOK BEARING

  TOK BEARING

  Excellent response quality. Maximum 2.94N/m torque allowed. *The CAD data for this series is currently being revised. This data will be made available as soon as the modifications have been completed.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	14.92 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rotary dampers / flanged Shape / TD62 / TOK BEARING

  TOK BEARING

  Extensive torque range. Main body type Rotation type, Operating environment Standard, Main body material Resin, Additional function With damper ,Opening angle θ (deg) 360, Mounting method Screw mounting, Mounting screw hole type Round hole.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	13.90 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rotary dampers / technical thermoplastic / TD69 / TOK BEARING

  TOK BEARING

  [Features]
  · Can be used in high temperature environment (80° C) due to super engineering plastics.
  · At the outer diameter (ø20), a damper torque of 3.43N/m is achieved.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	16.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rotary dampers / flange type / bidirectional, unidirectional / FDT-70A / FDN-70A series / FUJI LATEX

  FUJI LATEX

  This damper has high torque, a thin space saving shape, and a metal appearance. This small damper is available in 2 types of torque, one that works in both directions and the other in one direction.
  
  [Features]
  · The torque of the disc damper changes according to the rotation speed.
  · Generally, the torque increases as the rotation speed increases, and decreases as the rotation speed decreases.
  · Regarding the torque value of the catalog, 20rpm is the torque value at the time of rotation.
  · When using the rotational fall of the cover, the rotation speed is slow at the initial stage of dropping and only torque less than the rated torque value is generated.
  · The damper torque value (catalog rated torque value) varies according to the operating environment temperature.
  · The torque decreases as the temperature rises, and rises as the temperature decreases.
  · The viscosity of the oil inside the damper is affected by the temperature change, hence when the temperature returns to normal the torque also returns to the original value

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	22.63 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rotary dampers / flange type / unidirectional / FFD-28FS / FW / SS / SW-series / FUJI LATEX

  FUJI LATEX

  This damper is small and space saving, and is a unidirectional resin friction type damper that can be installed easily. In addition, no oil is used in this damper.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	16.40 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Torque hinges / bidirectional / aluminium / FHD-B1 / B2 series / FUJI LATEX

  FUJI LATEX

  This damper is a friction type damper in the shape of a hinge. Easy to install, and torque is applied both in the opening direction and closing direction.
  
  [Features]
  · Damper characteristics vary with the operating environment temperatures. The damper characteristics become weaker as the temperature rises, and becomes stronger as the temperature decreases.
  · This is because the shaft bush inside the damper changes as an effect of the temperature, and if the temperature returns to normal, the damper characteristics return to normal as well

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	15.33 €
  Min. Shipping Days ：	34 Days

  *Unit price with basic configuration

• 

  Rotary dampers / bidirectional / FRT-N1 series / FUJI LATEX

  FUJI LATEX

  This rotary damper is small yet the torque is high, with a flange that makes installation easier.
  
  [Features]
  · The torque of the rotary damper changes according to the rotation speed.
  · Generally, the torque increases as the rotation speed increases, and decreases as the rotation speed decreases.
  · In addition, the torque at startup is slightly different from the rated torque.
  · The torque of the rotary damper varies according to the operating environment temperature.
  · In general, the torque decreases as the temperature rises, and rises as the temperature decreases.
  · This is because the viscosity of the silicone oil inside the damper is affected by the temperature change.
  · However, when the temperature returns to normal temperature, the torque returns to its original value

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	7.30 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rotary dampers / bidirectional / FRT-S1 series / FUJI LATEX

  FUJI LATEX

  This damper is a small diameter rotary damper of space-saving type, with a cylindrical shape and a resin outer diameter ø9.5 mm.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	3.50 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rotary dampers / flanged / unidirectional / FYN-D3 series / FUJI LATEX

  FUJI LATEX

  This damper is a high torque type metal (zinc die cast) oscillating damper. Moreover, it has a wide operating range, with 180° of operation angle.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	39.34 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rotary dampers / TD22 / TOK BEARING

  TOK BEARING

  External diameter ø16.2 (mm) and 3.92N/m torque allowed. *The CAD data for this series is currently being revised. This data will be made available as soon as the modifications have been completed.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	28.81 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rotary dampers / flanged / TD42 / TOK BEARING

  TOK BEARING

  Excellent response quality. Maximum 8.83N/m torque allowed. Note: The CAD data for this series is being corrected. Please wait for a while until the correction is completed.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	38.24 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

Loading...