Shut-off valves（Body Material：Ductile Cast Iron）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Malleable Valve, 20K Type - Bellows Valve - Flange Model Outer Thread B･B Type
HITACHI VALVE
[Features]
· Uses 13Cr stainless steel mesh in the main parts, allowing use for high temperature fluids up to 350°C.
· Can be used for special fluids by changing the main packing and gasket.› Configure nowStarting from∗ ： 274.48 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
General Purpose Ductile Iron 10K Globe Valve Screw-in
KITZ
This is a globe valve made from ductile iron- Volume Discount
- 2D CAD data available
› Configure nowStarting from∗ ： 27.59 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Malleable Valve, General-Purpose, 10K Type, Globe Valve, Flanged
HITACHI VALVE
An economical and strong malleable valve. Optimal for iron-based pipes, as corrosion caused by contact potential difference is suppressed.- 2D CAD data available
› Configure nowStarting from∗ ： 78.91 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
General Purpose Ductile Iron 10K Globe Valve Flange
KITZ
A globe valve that is manufactured from ductile iron
[Features]
· This ductile iron valve can be used as a high-pressure gas equipment valve.
· The ductile cast iron product (FCD-S) is a cast iron product that passes JIS B 8270 Appendix 5-A and the standard specified by METI Public Notice No. 291 8/1/1975 (Revised: 3/24/1997 Notice No. 137) Article 4-7, Note 1. The material is regulated specifically for high-pressure gas facilities and pressure vessels, etc. These regulations differ to cast iron products, which are regulated by JIS G5502 Standard for Ductile Iron (FCD400-15, etc.).
· Cast iron products with the following chemical composition, mechanical properties, and micro structure-—as specified in the JIS and METI Notification for ductile iron castings (FCD-S)—make this product suitable for use in high-pressure gas equipment and pressure vessels.- Volume Discount
- 2D CAD data available
› Configure nowStarting from∗ ： 73.31 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
General Purpose, Ductile Iron 20K Globe Valve, Screw-In
KITZ
Globe valve made from ductile iron- Volume Discount
- 2D CAD data available
› Configure nowStarting from∗ ： 86.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Malleable Valve, General-Purpose 10K Type, Globe Valve, Flanged, Reinforced PTFE Disk Installed
HITACHI VALVE
An economical and strong malleable valve. Main parts are mostly stainless steel, which offers superior abrasion resistance to bronze. Optimal for iron-based pipes, as corrosion caused by contact potential difference is suppressed.- 2D CAD data available
› Configure nowStarting from∗ ： 101.70 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Malleable Valve, 10K Type, Globe Valve, Screw-In
HITACHI VALVE
Supports special fluids by replacing the packing, gasket or main components. A 13-chrome stainless steel mesh is mainly used for the main part. This allows for the use of high-temperature fluids up to 300°C.- 2D CAD data available
› Configure nowStarting from∗ ： 78.80 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Malleable Valve, 10K Type Globe Valve Flange Shape
HITACHI VALVE
Special liquids can be handled by replacing the packing, gasket or main part. 13 chrome stainless steel mesh is mainly used for main parts, allowing high temperature fluids up to 300°C to be used.- 2D CAD data available
› Configure nowStarting from∗ ： 92.59 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Malleable Valve, 10K Type, Globe Valve, Flanged, External Thread, B･B Type
HITACHI VALVE
Special liquids can be handled by replacing the packing, gasket or main part. 13Cr stainless steel used for main parts, allowing use with high temperature fluids up to 300°C.- 2D CAD data available
› Configure nowStarting from∗ ： 472.44 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Malleable Valve, 10K Type, Globe Valve, Screw Shape, Reinforced PTFE Disk Installation
HITACHI VALVE
Special liquids can be handled by replacing the packing, gasket or main part. 13 chrome stainless steel mesh is mainly used for main parts, allowing high temperature fluids up to 300°C to be used.- 2D CAD data available
› Configure nowStarting from∗ ： 109.26 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Malleable Valve, 20K Type, Globe Valve, Screwed
HITACHI VALVE
The main parts are made of 13Cr stainless steel, allowing high temperature fluids up to 350°C to be used. Special liquids can be handled by changing the packing, gasket or main part.- 2D CAD data available
› Configure nowStarting from∗ ： 119.40 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Malleable Valve, 20K Type Globe Valve Flange Shape
HITACHI VALVE
13Cr stainless steel used for main parts, allowing use with high temperature fluids up to 350°C. Special liquids can be handled by changing the packing, gasket or main part.- 2D CAD data available
› Configure nowStarting from∗ ： 120.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Malleable Valve, 20K Type, Angle Valve, Screw-In
HITACHI VALVE
13Cr stainless steel used for main parts, allowing use with high temperature fluids up to 350°C. Special liquids can be handled by changing the packing, gasket or main part.- 2D CAD data available
› Configure nowStarting from∗ ： 350.60 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
10K Type Ductile Cast-Iron Flanged Globe Valve
TOYO VALVE
A tough valve resistant to heat, corrosion abrasion resistance. Use in areas with vapor, hot water, and embedded lines where safety is a priority.- 2D CAD data available
› Configure nowStarting from∗ ： 96.97 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
16K Type Ductile Cast-Iron Screw-in Globe Valve
TOYO VALVE
Use this valve in locations where a higher degree safety is required: for steam, high-temperature water, and buried lines, etc.
[Features]
· A tough valve with excellent resistance against heat, corrosion, and abrasion.- 2D CAD data available
› Configure nowStarting from∗ ： 109.43 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Main Body Shape |
| Body Material |
| Applicable Fluid |
| Nominal Pressure |
| Supply Side, Connection Type |
| Supply Side, Plumbing Thread Nominal |
| Supply Side, Tube Flange Nominal |
| Control Side, Connection Type |
| Control Side, Plumbing Thread Nominal |
| Control Side, Tube Flange Nominal |
| Handle Shape |
| Body Lining |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | HITACHI VALVE | KITZ | HITACHI VALVE | KITZ | KITZ | HITACHI VALVE | HITACHI VALVE | HITACHI VALVE | HITACHI VALVE | HITACHI VALVE | HITACHI VALVE | HITACHI VALVE | HITACHI VALVE | TOYO VALVE | TOYO VALVE |
| Product Series | Malleable Valve, 20K Type - Bellows Valve - Flange Model Outer Thread B･B Type | Malleable Valve, General-Purpose, 10K Type, Globe Valve, Flanged | Malleable Valve, General-Purpose 10K Type, Globe Valve, Flanged, Reinforced PTFE Disk Installed | Malleable Valve, 10K Type, Globe Valve, Flanged, External Thread, B･B Type | Malleable Valve, 10K Type, Globe Valve, Screw Shape, Reinforced PTFE Disk Installation | ||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Starting from∗ | 274.48 € *Unit price with basic configuration | 27.59 € *Unit price with basic configuration Volume Discount | 78.91 € *Unit price with basic configuration | 73.31 € *Unit price with basic configuration Volume Discount | 86.50 € *Unit price with basic configuration Volume Discount | 101.70 € *Unit price with basic configuration | 78.80 € *Unit price with basic configuration | 92.59 € *Unit price with basic configuration | 472.44 € *Unit price with basic configuration | 109.26 € *Unit price with basic configuration | 119.40 € *Unit price with basic configuration | 120.17 € *Unit price with basic configuration | 350.60 € *Unit price with basic configuration | 96.97 € *Unit price with basic configuration | 109.43 € *Unit price with basic configuration |
| Min. Shipping Days | 7 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 8 Days | 6 Days | 7 Days | 7 Days | 8 Days | 6 Days | 7 Days | 7 Days | 8 Days |
| Main Body Shape | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Angles | Straight | Straight |
| Body Material | Ductile Cast Iron | Ductile Cast Iron | Ductile Cast Iron | Ductile Cast Iron | Ductile Cast Iron | Ductile Cast Iron | Ductile Cast Iron | Ductile Cast Iron | Ductile Cast Iron | Ductile Cast Iron | Ductile Cast Iron | Ductile Cast Iron | Ductile Cast Iron | Ductile Cast Iron | Ductile Cast Iron |
| Applicable Fluid | Water / Air / Oil / Steam | Water / Air / Oil / Gas / Steam | Water / Air / Oil / Steam | Water / Air / Oil / Gas / Steam | Water / Air / Oil / Gas / Steam | Water / Air / Oil / Steam | Water / Air / Oil / Steam | Water / Air / Oil / Steam | Water / Air / Oil / Steam | Water / Air / Oil / Steam | Water / Air / Oil / Steam | Water / Air / Oil / Steam | Water / Air / Oil / Steam | Water / Air / Oil / Gas / Steam | Water / Air / Oil / Gas / Steam |
| Nominal Pressure | 20K | 10K | 10K | 10K | 20K | 10K | 10K | 10K | 10K | 10K | 20K | 20K | 20K | 10K | 16K |
| Supply Side, Connection Type | Tube Flange | Rc (R) | Tube Flange | Tube Flange | Rc (R) | Tube Flange | Rc (R) | Tube Flange | Tube Flange | Rc (R) | Rc (R) | Tube Flange | Rc (R) | Tube Flange | Rc (R) |
| Supply Side, Plumbing Thread Nominal | - | 1B ～ 3/8B | - | - | 1B ～ 3/8B | - | 1B ～ 3/8B | - | - | 1B ～ 3/8B | 1B ～ 2B | - | 1 1/4B | - | 1B ～ 3/4B |
| Supply Side, Tube Flange Nominal | 1B ～ 8B | - | 1B ～ 3/8B | 1B ～ 8B | - | 1B ～ 3/4B | - | 1B ～ 3/8B | 2B ～ 10B | - | - | 1B ～ 3/8B | - | 1B ～ 3/4B | - |
| Control Side, Connection Type | Tube Flange | Rc (R) | Tube Flange | Tube Flange | Rc (R) | Tube Flange | Rc (R) | Tube Flange | Tube Flange | Rc (R) | Rc (R) | Tube Flange | Rc (R) | Tube Flange | Rc (R) |
| Control Side, Plumbing Thread Nominal | - | 1B ～ 3/8B | - | - | 1B ～ 3/8B | - | 1B ～ 3/8B | - | - | 1B ～ 3/8B | 1B ～ 2B | - | 1 1/4B | - | 1B ～ 3/4B |
| Control Side, Tube Flange Nominal | 1B ～ 8B | - | 1B ～ 3/8B | 1B ～ 8B | - | 1B ～ 3/4B | - | 1B ～ 3/8B | 2B ～ 10B | - | - | 1B ～ 3/8B | - | 1B ～ 3/4B | - |
| Handle Shape | Round Handle | Round Handle | Round Handle | Round Handle | Round Handle | Round Handle | Round Handle | Round Handle | Round Handle | Round Handle | Round Handle | Round Handle | Round Handle | Round Handle | Round Handle |
| Body Lining | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - |
Loading...
Filter by:
-
Main Body Shape
-
Body Material
- Bronze
- Cast Iron
- Ductile Cast Iron
- Cast Stainless Steel
-
Applicable Fluid
- Water
- Air
- Oil
- Gas
- Chemical
- Steam
-
Nominal Pressure
- 5K
- 10K
- 16K
- 20K
- 100 Type
- 125 Type
- 150 Type
-
Supply Side, Connection Type
-
Supply Side, Plumbing Thread Nominal
-
Supply Side, Tube Flange Nominal
-
Control Side, Connection Type
-
Control Side, Plumbing Thread Nominal
-
Control Side, Tube Flange Nominal
-
Handle Shape
-
Body Lining
Brand
CAD data type
-
- 2D
- 3D
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.