Screw plugs (metric, imperial)（Nominal of Thread (R)：3/4）

?* Information on days to ship and prices

• 

  Plug -SH (Square Head)【1-25 Pieces Per Package】

  SUNCO

  [Material] Steel, stainless steel SUS316L Stainless steel
  [Surface treatment] Untreated, chromate, bright chromate, black oxide film

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	5.12 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Hex Socket Head Taper Plug (Sink)【1-125 Pieces Per Package】

  SUNCO

  Seal by screwing in the female taper pipe screw. At that time the standard diameter is set so that the end is nearly flush with the mounting surface.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	1.42 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  GOSHO (GM)【1-100 Pieces Per Package】

  GOSHO WORKS

  [Features]
  · The GM type plug is a level seal type (flush type) developed by Gosho. When the plug is screwed into PT (pipe taper) female threading specified in JISB0203, a reference diameter is established near the large end face so that its large end face is almost flush with the mounting face.
  · It recently has become the indispensable primary plug for hydraulic and pneumatic equipment.
  · It has the advantages of a GM type plug and is a level seal type, so it becomes flush with the embedded and installed main body for a pleasing external appearance and also facilitates miniaturization of machinery
  · Comes with a tightening interference, which enables substantial tightening, allowing it to withstand great internal pressure.
  · The plug is subject to cold plastic working for high precision, and is heat processed to allow it to be used under high pressure.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	2.99 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Square Head Taper Plug, SH Type

  NISSAN SCREW

  It is a tapered tap that can be used as a stopcock, etc. for general piping.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	3.00 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Hex Socket Head Taper Plug, Sink Type, B Type【1-50 Pieces Per Package】

  NISSAN SCREW

  The reference diameter position is closer to the upper surface of the plug than the JIS R thread and becomes flush with the female thread member when tightened. For general hydraulic pressure equipment. Hardness 32 to 42HRC product.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	1.53 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Hex Socket Head Taper Thread Plug (Float)【1-50 Pieces Per Package】

  SUNCO

  [Material] Steel, stainless steel SUS316L Stainless steel
  [Surface treatment] chromate, trivalent chromate (trivalent white), nickel plating, bright chromate, black oxide film

  • Volume Discount

  • Stock

  Select to compare

  › Configure now
  Starting from∗ ：	1.99 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Hex Socket Head Taper Plug, GJ Type

  GOSHO WORKS

  Taper plug usable in high pressure (high airtightness) conditions developed for reliability.
  
  [Features]
  · The GJ type plug is referred to as a "float type" (JIS type), so when it is screwed into the PT or PS female thread specified in JISB0203, the standard diameter of the taper thread is established near the center of the length (I) so that the large end service is higher than the mounting surface.
  · Conventionally, a PT plug with a square hole is specified by JIS in place of a hex hole for the GJ type, but recently in order to improve the safety and work efficiency of tightening, hex socket head GJ plugs capable of reliable tightening have come to be used in various quarters.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	2.72 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Hex Socket Head Taper Plug, Float Type, A Type

  NISSAN SCREW

  Depending on the position of the reference diameter, there are two types: the sinking type and the floating type. [Features]They are used for sealing in areas such as hydraulic systems, pneumatic systems, pumps and automobiles.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	0.98 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Hex Socket Head Taper Plug, Sink Type, NB Type

  NISSAN SCREW

  The reference diameter position is closer to the upper surface of the plug than the JIS R thread and becomes flush with the female thread member when tightened. For general hydraulic pressure equipment.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	1.82 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Hex Socket Head Taper Thread Plug with Square Head - SH Type

  SAKAMURA

  [Material] Steel, stainless steel
  [Surface treatment] None, chromate plating, bright chromate plating

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	2.85 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

Loading...