Type Code Seach | *NOT READY*: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Screw-Hole-Related Tools（Screw size (Nominal)：M1.7）

Search by sub-category

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

A Tap Series, Spiral Tap, A-SFT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	25.57 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

A Tap Series for Pipes Point Tap A-POT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	24.76 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, General Purpose EX-SFT

OSG

Suited for drilling blind holes in materials that leave coil shaped connected cutting debris such as carbon steel, alloyed steel, and non-ferrous metals.

Volume Discount

Stock

Select to compare

› Configure now
Starting from^∗ ：	16.24 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, for General, EX-POT

OSG

Suited for materials that leave coil shaped connected cutting dust that is in general use such as carbon steel, alloyed steel, and non-ferrous metals. Reliably Pushes Cutting Debris Forward Removing Concerns of Debris Interference

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	14.86 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

IT-Toughlet C Coated

TANOI MFG

Rise tap with a correct bite without pitch or angle errors.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	54.61 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Solid Die D for Metric Threads

YAMAWA MFG

Solid die with improved die runout precision.
[Features]
· High-speed tool steel (HSS) is adopted, realizing stable machining.
· The front surface is the surface with a marking on the chamfering.
· The machining reference surface at the rear is set so that the end face makes close contact when the holder is attached.
· Screw adjustments are not required and die outer diameter precision is improved compared to adjustable dies as this is a solid die.
· Solves problems particular to adjustable type dies, realizing high precision screw machining.
[Applications]
· Convenient for cutting male threads on various work materials, whether hand turned or used with machinery.
· Combining with NC tooling enables machining with a MC.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	80.91 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series For Stainless Steel Use EX-SUS-POT

OSG

Offers superb sharpness and durability. Can be used to drill holes in difficult-to-cut stainless steel.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	17.56 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Stainless Steel Point Tap SU+PO / SU-PO

YAMAWA MFG

Point tap for through-hole machining with extremely viscous or work-hardened work material.
[Features]
Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 10 m/min or less is recommended.
[Applications]
· Ideal for machining through-holes with chrome steel, molybdenum steel, and stainless steel.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	33.91 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Rolling Dice MS-RS-D / RS-D

YAMAWA MFG

Select to compare

› Configure now
Starting from^∗ ：	149.12 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SANDVIK CoroTap 400 Forming Tap

SANDVIK

Select to compare

› Configure now
Min. Shipping Days ：	5 Days

Point Tap Series, Tin Coated, TIN-POT

OSG

Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	25.07 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series, Tin Coated, TIN-NRT

OSG

Suitable for both steel and non-ferrous alloys. Capable of high-speed cutting and efficient tapping; offer drastically improved durability.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	20.42 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series VP New Roll VP-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	22.23 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

IT-Toughlet TiCN Coated

TANOI MFG

Rise tap with a correct bite without pitch or angle errors.

Select to compare

› Configure now
Starting from^∗ ：	43.13 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Titanium Coating Roll Tap R+V / R-V

YAMAWA MFG

A coating roll tap suitable for threading steel and nonferrous materials.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	33.01 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Taflet for Steel TFST

NACHI(FUJIKOSHI)

Suitable for thread rolling of mild steel, stainless steel below 20HRC of hardness.

Select to compare

› Configure now
Starting from^∗ ：	24.91 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Taflet -L TFL

NACHI(FUJIKOSHI)

Suitable for rolled threading of aluminum and nonferrous material.

Select to compare

› Configure now
Starting from^∗ ：	30.14 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Taflet -S TFS

NACHI(FUJIKOSHI)

Suitable for rolled threading of aluminum and nonferrous material.

Select to compare

› Configure now
Starting from^∗ ：	24.56 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, Tin Coated, TIN-SFT

OSG

The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	25.23 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, for Hard-to-Cut Materials, CPM-SFT

OSG

Workpiece material is suitable for blind hole drilling of about 20 ~ 35 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	23.33 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Hand Tap Series, Super Hard Hand Tap, OTT

OSG

Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass castings and other workpieces with high precision automatic machine.

Select to compare

› Configure now
Starting from^∗ ：	81.14 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, for Difficult-to-Machine Material, CPM-POT

OSG

Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	25.23 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series IT New Roll IT-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	23.83 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series VP New Roll Short Chamfer VP-SC-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	23.83 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series VP New Roll Long Shank VP-LT-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Select to compare

› Configure now
Starting from^∗ ：	30.34 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series X Performer S-XPF

OSG

When working carbon steel and alloyed steel has fewer problems with cutting debris compared to cutting taps, allowing longer lasting machining. Particularly effective in working with automobile related cast steel parts
* M2.6 and below will be changed to constant powdered high strength steel (CPM). Please understand ahead of time.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	23.23 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series for Steel HRT

OSG

Suited for high stretch materials such as low-carbon steel, low-carbon alloyed steel and stainless steel due to plasticity deformation formed screws. Particularly Suited For Blind Holes Due to Lack of Debris

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	11.82 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Short Chamfer Torqueless Roll Taps SC-TL-RZ

YAMAWA MFG

The number of chamfer threads is just 1, creating a roll tap with specially shaped threading parts for achieving low torque use.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	38.33 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap for Stainless Steel SU+SP / SU-SP

YAMAWA MFG

Spiral tap for blind hole machining with extremely viscous or work-hardened work material.
[Features]
· For blind hole machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.
· Optimal design of the screw part reduces the machining burden on each blade bite, reducing the cutting resistance and increasing tool life.
· Stable scrap is ejected and a good finish is realized.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 10 m/min or less is recommended.
[Applications]
Optimal for machining extremely viscous or work-hardened work material.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	33.91 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Dry Processing Roll Tap OL+RZ / OL-RZ

YAMAWA MFG

It is a roll tap that's capable of tapping without lubrication for burred thin iron plates and steel with relatively short processing length at the size of M6 or less.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	34.30 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

High Performance Roll Tap HP+ RZ / HP-RZ

YAMAWA MFG

It is suitable for processing steel materials (35 HRC or less) and light alloys, and can support high-speed machining (20-50 m/min)

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	34.30 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap For High Carbon Steel HC+PO / HC-PO

YAMAWA MFG

It is suitable for tapping high carbon steel such as S55C.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	23.97 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Auto High-Speed Steel Die for Stainless Steel For Automatic Lathes HS-D

YAMAWA MFG

Solid die for difficult-to-cut materials, such as stainless steel, etc.
[Features]
· Adopts high-speed tool steel (HSS).
· Can be used only from the surface as oxide treatment (OX treatment) is applied as the surface treatment.
· The outer diameter of the die is made smaller and thinner for less rotational vibration during high speed cutting with automatic lathes.
· Stable male threading can be performed.
· Solid type with minimal variation even under harsh cutting condition specifications.
[Applications]
· Optimal for machining stainless steel and other difficult-to-cut materials.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	96.69 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Hand Tap for Light Alloys N-CT LA

YAMAWA MFG

A carbide tap suitable for thread cutting with aluminum casting (AC), aluminum die castings (ADC), zinc die castings (ZDC), etc.

Select to compare

› Configure now
Starting from^∗ ：	108.19 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Hand Tap for Cast Iron N-CT FC

YAMAWA MFG

A carbide tap suitable for thread machining of hard and brittle material such as cast iron.

Select to compare

› Configure now
Starting from^∗ ：	108.19 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SG Point Tap SGPO

NACHI(FUJIKOSHI)

[Features]
・ A tap for through-holes, supporting various cutting speeds, machinery, and work materials.

Select to compare

› Configure now
Starting from^∗ ：	49.89 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	OSG	OSG	OSG	OSG	TANOI MFG	YAMAWA MFG	OSG	YAMAWA MFG	YAMAWA MFG	SANDVIK	OSG	OSG	OSG	TANOI MFG	YAMAWA MFG	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	NACHI(FUJIKOSHI)
Product Series	A Tap Series, Spiral Tap, A-SFT	A Tap Series for Pipes Point Tap A-POT	Spiral Tap Series, General Purpose EX-SFT	Point Tap Series, for General, EX-POT	IT-Toughlet C Coated	Solid Die D for Metric Threads	Point Tap Series For Stainless Steel Use EX-SUS-POT	Stainless Steel Point Tap SU+PO / SU-PO	Rolling Dice MS-RS-D / RS-D	SANDVIK CoroTap 400 Forming Tap	Point Tap Series, Tin Coated, TIN-POT	Groove-Free Tap Series, Tin Coated, TIN-NRT	Groove-Free Tap Series VP New Roll VP-NRT	IT-Toughlet TiCN Coated	Titanium Coating Roll Tap R+V / R-V	Taflet for Steel TFST	Taflet -L TFL	Taflet -S TFS	Spiral Tap Series, Tin Coated, TIN-SFT	Spiral Tap Series, for Hard-to-Cut Materials, CPM-SFT	Hand Tap Series, Super Hard Hand Tap, OTT	Point Tap Series, for Difficult-to-Machine Material, CPM-POT	Groove-Free Tap Series IT New Roll IT-NRT	Groove-Free Tap Series VP New Roll Short Chamfer VP-SC-NRT	Groove-Free Tap Series VP New Roll Long Shank VP-LT-NRT	Groove-Free Tap Series X Performer S-XPF	Groove-Free Tap Series for Steel HRT	Short Chamfer Torqueless Roll Taps SC-TL-RZ	Spiral Tap for Stainless Steel SU+SP / SU-SP	Dry Processing Roll Tap OL+RZ / OL-RZ	High Performance Roll Tap HP+ RZ / HP-RZ	Point Tap For High Carbon Steel HC+PO / HC-PO	Auto High-Speed Steel Die for Stainless Steel For Automatic Lathes HS-D	Carbide Hand Tap for Light Alloys N-CT LA	Carbide Hand Tap for Cast Iron N-CT FC	SG Point Tap SGPO
Starting from^∗	25.57 € *Unit price with basic configuration Volume Discount	24.76 € *Unit price with basic configuration Volume Discount	16.24 € *Unit price with basic configuration Volume Discount	14.86 € *Unit price with basic configuration Volume Discount	54.61 € *Unit price with basic configuration Volume Discount	80.91 € *Unit price with basic configuration Volume Discount	17.56 € *Unit price with basic configuration Volume Discount	33.91 € *Unit price with basic configuration Volume Discount	149.12 € *Unit price with basic configuration	-	25.07 € *Unit price with basic configuration Volume Discount	20.42 € *Unit price with basic configuration Volume Discount	22.23 € *Unit price with basic configuration Volume Discount	43.13 € *Unit price with basic configuration	33.01 € *Unit price with basic configuration Volume Discount	24.91 € *Unit price with basic configuration	30.14 € *Unit price with basic configuration	24.56 € *Unit price with basic configuration	25.23 € *Unit price with basic configuration Volume Discount	23.33 € *Unit price with basic configuration Volume Discount	81.14 € *Unit price with basic configuration	25.23 € *Unit price with basic configuration Volume Discount	23.83 € *Unit price with basic configuration Volume Discount	23.83 € *Unit price with basic configuration Volume Discount	30.34 € *Unit price with basic configuration	23.23 € *Unit price with basic configuration Volume Discount	11.82 € *Unit price with basic configuration Volume Discount	38.33 € *Unit price with basic configuration Volume Discount	33.91 € *Unit price with basic configuration Volume Discount	34.30 € *Unit price with basic configuration Volume Discount	34.30 € *Unit price with basic configuration Volume Discount	23.97 € *Unit price with basic configuration Volume Discount	96.69 € *Unit price with basic configuration Volume Discount	108.19 € *Unit price with basic configuration	108.19 € *Unit price with basic configuration	49.89 € *Unit price with basic configuration
Min. Shipping Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	5 Days	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days
Specifications			Stock
Screw Types	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Unified	Meter	Meter	Meter	Meter	Meter
Screw size (Nominal)	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7	M1.7
Pitch (P), Number of Threading(mm)	0.35	0.35	0.35	0.35	0.2 ～ 0.35	0.35	0.35	0.35	0.35	-	0.35	0.35	0.35	0.2 ～ 0.35	0.35	0.35	0.35	0.35	0.35	0.35	0.35	0.35	0.35	0.35	0.35	0.35	0.35	0.35	0.35	0.35	0.35	0.35	0.35	0.35	0.35	0.35
Chamfer threads (Lcf)	2.5P	5P	2.5P	5P	1P ～ 4P	-	4P	5P	-	-	5P	2P ～ 4P	2P ～ 4P	1P ～ 4P	2P ～ 4P	4P	4P	4P	2.5P	3P	1.5P ～ 3P	5P	2P	1P	2P ～ 4P	2P ～ 4P	2.5P	1P	2.5P	4P	2P	5P	-	1.5P ～ 3P	1.5P ～ 3P	5
Tool Material Type	Powder high-speed steel	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	High-speed steel	High-speed steel	Vanadium High-Speed Steel	High-speed steel	High-speed steel	-	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Vanadium High-Speed Steel	Powder high-speed steel	Carbide	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Vanadium High-Speed Steel	High-speed steel	Powder high-speed steel	High-speed steel	Powder high-speed steel	Powder high-speed steel	High-speed steel	High-speed steel	Carbide	Carbide	High-speed steel
work material	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[○]	-	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○]	-	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○]	Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎]	Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○]	-	Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Quenched and tempered steel (45 to 55 HRC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]
Tap Type	Spiral Tap	Point tap	Spiral Tap	Point tap	Roll tap	Die	Point tap	Point tap	Die	-	Point tap	Roll tap	Roll tap	Roll tap	Roll tap	Roll tap	Roll tap	Roll tap	Spiral Tap	Spiral Tap	Hand Tap	Point tap	Roll tap	Roll tap	Roll tap	Roll tap	Roll tap	Roll tap	Spiral Tap	Roll tap	Roll tap	Point tap	Die	Hand Tap	Hand Tap	Point tap
Hole type	For blind hole	For through hole	For blind hole	For through hole	-	-	For through hole	For through hole	-	-	For through hole	For blind hole	For blind hole	-	For through hole / For blind hole	For through hole	For through hole	For through hole	For blind hole	For blind hole	For through hole / For blind hole	For through hole	For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For blind hole	For through hole	For through hole / For blind hole	For through hole	-	For through hole / For blind hole	For through hole / For blind hole	For through hole
Coating Y/N	Available	Available	N/A	N/A	Available	N/A	N/A	N/A	N/A	-	Available	Available	Available	Available	Available	N/A	N/A	N/A	Available	N/A	N/A	N/A	Available	Available	Available	Available	N/A	Available	N/A	Available	Available	N/A	N/A	N/A	N/A	Available
Coating Type	Other	Other	Non-Coated	Non-Coated	Other	-	Non-Coated	-	-	-	TiN	TiN	TiCN	TiCN	TiN	-	-	-	TiN	Non-Coated	Non-Coated	Non-Coated	TiCN	TiCN	TiCN	TiCN	Non-Coated	TiCN	-	TiCN	TiCN	-	-	-	-	TiCN
Overall Length (L)(mm)	36	36	36	36	36	-	36	36	-	40	36	36	36	36	36	36	36	36	36	36	36	36	36	36	60	36	36	36	36	36	36	36	-	36	36	36

Filter by:

Stock

- Show only stock items
Clear

Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
Clear

Screw size (Nominal)
CTG-54

CTG-42

CTG-36

CTG-28

CTG-22

CTG-16

No0UN

NO.0-80UNF

No.10

S0.1

NO.1-72UNF

NO.1-64UNC

NO.10-32UNF

No.10-32UNF

NO.10-24UNC

No.10-24UNC

No.12

NO.12-28UNF

No.12-28UNF

NO.12-24UNC

No.12-24UNC

No.2

S0.2

NO.2-64UNF

No.2-64UNF

NO.2-56UNC

No.2-56UNC

No.3

S0.3

NO.3-56UNF

No.3-56UNF

NO.3-48UNC

No.3-48UNC

No.4

S0.4

NO.4-48UNF

No.4-48UNF

NO.4-40UNC

No.4-40UNC

No.5

S0.5

NO.5-44UNF

No.5-44UNF

NO.5-40UNC

No.5-40UNC

No.6

S0.6

NO.6-40UNF

No.6-40UNF

No.6-32UNC

S0.7

No.8

S0.8

NO.8-36UNF

No.8-36UNF

NO.8-32UNC

No.8-32UNC

S0.9

1"

1UN

1UNS

G1

G 1"

M1

NPS1

NPT1

NPTF1

No1UN

PF1

PF 1

PT 1

R1

Rp1

S1

UNC 1

UNC 1"

UNF 1"

W1

1'-12UNF

1´-11

1-8UNC

1'-8UNC

G1"-3"

1"1/2UN

1"1/2

G1"1/2

NPS1"1/2

NPT1"1/2

R1"1/2

Rp1"1/2

W1"1/2

1 1/2-8UN

1"1/4UN

1"1/4

G1"1/4

NPS1"1/4

NPT1"1/4

R1"1/4

Rp1"1/4

W1"1/4

1 1/4-8UN

1"1/8UN

G1"1/8

R1"1/8

W1"1/8

1 1/8-8UN

1"1/16UN

1/2

1/2UN

G1/2

G 1/2

NPS1/2

NPT1/2

NPTF1/2

PF 1/2

PT 1/2

R1/2

Rc1/2

Rp1/2

UNC 1/2

UNF 1/2

UNJF 1/2

W1/2

1/2-20UNF

1/2-14

1/2-13UNC

G1/2 5/8

1/2W12

1"3/4UN

G1"3/4

R1"3/4

Rp1"3/4

W1"3/4

1 3/4-8UN

1"3/8UN

G1"3/8

R1"3/8

W1"3/8

1 3/8-8UN

1/4

1/4UN

G1/4

G 1/4

NPS1/4

NPT1/4

NPTF1/4

PF1/4

PF 1/4

PS 1/4

PT 1/4

R1/4

Rc1/4

Rp1/4

SM1/4

UNC 1/4

UNF 1/4

UNJF 1/4

W1/4

1/4-28UNF

1/4-20UNC

1/4-19

1/4W20

W1"5/8

1 5/8-8UN

W1"7/8

1 7/8-8UN

1'W8

1/8

G1/8

G 1/8

NPS1/8

NPT1/8

NPTF1/8

PF1/8

PF 1/8

PT 1/8

R1/8

Rc1/8

Rp1/8

SM1/8

W1/8

1/8-28

1/16

G1/16

NPS1/16

NPT1/16

R1/16

Rp1/16

M1.1

G 1.1/2

G 1.1/4

G 1.1/8

M1.2

S1.2

M1.4

S1.4

M1.6

M1.7

M1.8

2"

2UN

G2

M2

M2.0

NPS2

NPT2

No2UN

R2

Rp2

UNC 2

UNF 2

W2

2-8UN

G2"1/2

R2"1/2

Rp2"1/2

W2"1/4

M2.2

M2.3

M2.5

M2.5 - M6

M2.6

3M

EGM 3

G3

M3

M3.0

No3UN

R3

Rp3

STI M3

UNC 3

UNF 3

G3"1/2

R3"1/2

Rp3"1/2

3/4

3/4UN

G3/4

G 3/4

NPS3/4

NPT3/4

NPTF3/4

PF 3/4

R3/4

Rp3/4

UNC 3/4

UNF 3/4

W3/4

3/4-16UNF

3/4-14

3/4-10UNC

3/4W10

3/8

3/8UN

G3/8

G 3/8

NPS3/8

NPT3/8

NPTF3/8

PF3/8

PF 3/8

R3/8

Rc3/8

Rp3/8

UNC 3/8

UNF 3/8

UNJF 3/8

W3/8

3/8-24UNF

3/8-19

3/8-16UNC

3/8W16

M3 - M10

M3～10

M3 - M12

SM3/16

W3/16

3/16W24

M3 - M18

SM3/32

3.5

M3.5

4

4M

EGM 4

G4

M4

M4.0

MF4

No4UN

R4

Rp4

STI M4

UNC 4

UNF 4

№4-40UNC

M4～6

M4.5

5M

EGM 5

M5

M5.0

MF5

No5UN

STI M5

UNC 5

№5-40UNC

5/8

5/8UN

G5/8

G 5/8

NPS5/8

R5/8

UNC 5/8

UNF 5/8

W5/8

5/8-18UNF

5/8-11UNC

G5/8 3/4

5/8W11

M5 - M12

M5～13

5/16

5/16UN

UNC 5/16

UNF 5/16

UNJF 5/16

W5/16

5/16-24UNF

5/16-18UNC

5/16W18

W5/32

5.5M

M5.5

6

EGM 6

M6

M6.0

MF6

No6UN

STI M6

UNC 6

UNF 6

UNJC 6

No6-40UNF

№6-32UNC

# 6 - 32 UNC

M7

MF7

PG7

7 execution M3 - M12

7/8

7/8UN

G7/8

G 7/8

NPS7/8

R7/8

UNC 7/8

UNF 7/8

W7/8

7/8-14UNF

7/8-9UNC

7/8W9

7/16

7/16UN

UNC 7/16

UNF 7/16

UNJF 7/16

W7/16

7/16-20UNF

7/16-14UNC

7/16W14

SM7/32

7.5

M7.5

EGM 8

M8

MF8

No8UN

STI M8

TV8

Tr8

UNC 8

UNF 8

UNJC 8

№8-32UNC

9

M9

PG9

9/16

9/16UN

UNC 9/16

UNF 9/16

9/16-18UNF

9/16-12UNC

9/16W12

SM9/32

SM9/64

M9.5

EGM 10

M10

MF10

No10UN

STI M10

Tr10

Tr 10

UNC10

UNC 10

UNF 10

UNJF 10

№10-32UNF

№10-24UNC

M10～25

M11

PG11

SM11/32

SM11/64

EGM 12

M12

MF12

Mf12

No12UN

STI M12

Tr12

Tr 12

UNC 12

UNF 12

M12 x 1.5

M13

PG13.5

M14

MF14

Tr 14

M15

SM15/64

M16

MF16

Mf16

PG16

Tr16

Tr 16

M16 x 1.5

M17

M18

MF18

Tr18

Tr 18

M19

M20

MF20

Mf20

Tr 20

M20 x 1.5

M21

PG21

M22

M22X

MF22

Tr 22

M23

M24

M24X

MF24

Tr 24

M25

M25X

MF25

Mf25

Tr 25

M25 x 1.5

M26

MF26

Tr 26

M27

MF27

M28

MF28

Tr 28

PG29

M30

MF30

Tr 30

M32

Mf32

M33

M34

M35

M36

PG36

M37

M38

M39

M40

M42

PG42

M44

M45

M48

M50

M52

M56

M64

1015

1020N100M

1020N150M

06510X28R

10154

12204

12254N100M

12254N150M

12254N200M

16304N100M

16304N150M

16304N200M

16304N250M

20305

20505N100M

20505N150M

20505N200M

20505N300M

20505N350M

25506N100M

25506N150M

25506N200M

25506N300M

25506N350M

32506

32506N150M

32506N200M

32506N300M

035083N075M

035083N080M

040123N100M

060163N050M

060163N100M

060163N125M

065103X28G

075203N125M

075203N150M

080153X19G

080153X19R

080203N050M

080203N100M

090244N125M

090244N175M

100254N050M

100254N100M

100254N150M

100254N200M

120204X14G

120204X14R

120304N100M

120304N150M

120304N200M

160264X11G

160264X11R

160404N150M

160404N200M

160404N250M

200305X11G

200305X11R

200505N150M

200505N200M

200505N300M
Clear

Pitch (P), Number of Threading(mm)
.02

0.025

0.05

0.08

0.1

0.125

0.15

0.175

0.2

0.225

0.25

0.3

0.35

0.4

0.45

0.5

0.6

0.7

0.75

0.8

0.9

1

1.1

1.25

1.4

1.5

1.75

1.9

2

2.5

2.8

3

3.5

4

4.5

5

5.5

6

7

8

9

10

11

11 1/2

11.5

12

13

14

16

18

19

20

24

27

28

32

36

40

44

48

56

64

72

80
Clear

Chamfer threads (Lcf)
1P

1.5-Shaped

1.5 P

1.5P

2

2 P

2P

2.5

2.5 P

2.5P

3 P

3P

3.5P

4

4 P

4P

4.5P

5

5 P

5P

5.5P

6P

7P

8P

9 P

9P

22P

22.5P

23P

24P

24.5P

25P

26P

27P

28P

30P
Drawing

Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Alloy HSS
- Vanadium High-Speed Steel
- JIS-SKS
Details

Clear

work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
Clear

Tap Type
- Spiral Tap
- Point tap
- Roll tap
- Hand Tap
- Tap for pipes
- Thread cutter
- Thread-Cutting-Related Tool
- Die
- Tap wrench
- Modification/removal Tool
- Oil Hole Tap
Clear

Hole type
- For through hole
- For blind hole
Clear

Coating Y/N
- Available
- N/A
Clear

Coating Type
- For High Hardness (Silicon Group)
- TiAlN
- TiCN
- TiN
- DLC
- CrN
- Non-Coated
- Nitriding Treatment
- Other
Details

Clear

Overall Length (L)(mm)
16

30

32

33

34

35

36

38

39

40

41

41.5

42

44

44.5

45

46

47.62

47.625

48

49

49.21

50

50.8

51

52

53

53.975

53.98

54

55

55.28

55.64

55.92

56

57

58

59

59.5

60

60.32

60.325

61

61.5

62

62.52

62.65

63

63.5

64

65

66

67

68

69

69.06

69.063

69.42

69.71

70

72

73

74

74.61

74.625

75

76

78

79

79.03

79.31

80

80.17

82

83

84

85

85.72

87

88

89

89.12

89.18

90

91

91.28

92

95

96

96.84

98.97

99

99.21

100

101

102

104

105

108

109

109.65

110

111

112

113.5

115

118

119

120

121

125

130

130.175

130.2

135

136

140

145

150

155

160

163

165

170

175

180

185

190

195

200

205

210

220

224

225

230

250

260

270

280

290

300

310

315

460
Drawing

Clear

Brand

- MISUMI (0)
- Cost Efficient Products ()
- OSG (17)
- YAMAWA MFG (12)
- NACHI(FUJIKOSHI) (4)
- TANOI MFG (2)
- SANDVIK (1)
- NS TOOL (0)
- BERNSTEIN AG (0)
- KANETEC (0)
- MATADOR (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- STAHLWILLE (0)
- H & H (0)
- RUKO (0)
- WALTER PROTOTYP (0)
- BAHCO (0)
- ENGINEER (0)
- LIGHTSEIKI (0)
- CARMEX (0)
- HAZET (0)
- RENNSTEIG (0)
- TRUSCO NAKAYAMA (0)
- WERA (0)
- WIHA (0)
- SKC (0)
- EIKOSHA (0)
- ISHIHASHI (0)
- GEDORE (0)
- ESCO (0)
- FEIN (0)
- GUHRING (0)
- REX TOOLS (0)
- NOGAJAPAN (0)
Clear