Plates / Ceramic PUR / Ether, Ester / A50, A70, A90, A95 / adhesive layer (Part Numbers - CAD Download)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- More Information
- Catalog
- Technical Information
Back to the Category Panels (polyurethane rubber, rubber, foam, felt)
Technical Drawing - Panels (polyurethane rubber, rubber, foam, felt)
Open the technical drawing in the new window
Available dimensions and tolerances can be found under the tab More information.
Basic Properties (e.g., material, hardness, coating, tolerance) - Panels (polyurethane rubber, rubber, foam, felt)
| Type | Type | Material | Hardness | Color | |
| No Adhesive | Adhesive | ||||
| Mold Surface Type | UTSCS | UTSCSA | Ceramic Urethane (Ether Polyurethane) | Shore A95 | Natural Color (Gray) |
| UTSCH | UTSCHA | Shore A90 | |||
| UTSCM | UTSCMA | Ceramic Urethane (Ester Polyurethane) | Shore A70 | ||
| UTSCL | UTSCLA | Shore A50 | |||
| Machined Surface Type | UTSCSK | UTSCSKA | Ceramic Urethane (Ether Polyurethane) | Shore A95 | |
| UTSCHK | UTSCHKA | Shore A90 | |||
| UTSCMK | UTSCMKA | Ceramic Urethane (Ester Polyurethane) | Shore A70 | ||
| UTSCLK | UTSCLKA | Shore A50 | |||
Mold Surface Type has glossy smooth surface but not slippery. Machined Surface Type has ground surface on one side improving sliding property.
Further specifications can be found under the tab More information.
Composition of a Product Code - Panels (polyurethane rubber, rubber, foam, felt)
| Part Number | - | A | - | B |
| UTSCLK5 | - | 100 | - | 30 |
| Part Number | - | A | - | B | - | F | - | G | - | Screw Nominal Dia. |
| UTSCMK2H5 | - | 100 | - | 50 | - | F80 | - | G25 | - | N3 |
General Information - Panels (polyurethane rubber, rubber, foam, felt)
_-_Sortiment.jpg)
Selection details of panels (polyurethane rubber, rubber, foam, felt)
- Material: polyurethane rubber (PU/PUR), heat-resistant polyurethane rubber, low-impact polyurethane rubber, abrasion-resistant polyurethane rubber, antistatic polyurethane, nitrile (NBR), chloroprene rubber (CR), polyethylene (EPDM), silicone (SI), fluorine (FPM), butyl rubber (IIR), natural rubber (NR), hard rubber, special synthetic rubber, polyurethane foam, head-insulating foam, polyethylene foam, low-rebound foam
- Thickness (mm): 0.5 to 50
- Width (mm): 3 to 500
- Length (mm): 10 to 2000
Description/Basics
Foam plates and rubber plates are provided for damping or for sound proofing. MISUMI offers these in various Shore hardening for a wide variety of tasks. Due to the variety of materials, different resistances to environmental influences are possible depending on the application. The foam plates reduce sound in machines and can reduce the sound emissions of a system. For more information on foam characteristics, follow this link.
Rubber plates or foam plates are also suitable in conveyor systems to absorb components to be transported at a dampened level or to protect them from damage as a lateral guide when the components bump into each other. Hard rubber panels or low-impact rubber or foam panels reduce the impact energy of the components. These minimize and lower the vibrations in an application.
In addition, MISUMI offers highly abrasion-resistant polyurethane (Vulkollan), which has an abrasion resistance that is six times higher than with conventional polyurethane.
Ceramic polyurethane plates contain ceramic particles. After machining, these can have a smooth surface despite low Shore hardness.
The polyurethane rubber plates are also available antistatically. The specific resistance of antistatic polyurethane plates prevents static charging. This prevents any damage to electronic components.
For applications with higher temperatures, MISUMI offers heat-resistant polyurethane rubber, which can withstand a temperature range of up to approx. ~120°C (see the product specifications for exact information).
MISUMI also offers low-friction and anti-friction rubber plates. Low-friction rubber plates are often used in the gentle component guide for belt conveyors and roller conveyors.
Felt plates have the property of absorbing or dispensing oil and other liquids via the capillary effect. This property can be used to remove, for example, excess oil on a belt conveyor.
In addition, MISUMI offers rubber plates and foam plates that are self-adhesive for simplified assembly. Furthermore, you will find double-adhesive tape for attaching rubber plates and foam plates.
Additional properties on foam panels and rubber plates can be found in the Properties PDF.
MISUMI also offers these products in a round shape as discs and sleeves made of rubber, natural rubber, foam and felt.
Application Examples - Panels (polyurethane rubber, rubber, foam, felt)
Application example
(1) Low-friction rubber plate (2) belt conveyor
Application example
(1) Vibration damping plate
Industrial Applications
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | With or w/o Adhesive | Thickness T (mm) | Width A (mm) | Length B (mm) | Hardness (Shore, Asker, Penetration) | Specifications | Hole Machining | Counterbored Hole Nominal Dia. [Z] | F (mm) | G (mm) | Through Hole Nominal Dia. [N] | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 9 Days | 10 | Adhesive | 8 | 25 ～ 300 | 25 ～ 200 | Shore A90 | Machined Surface / Hole Type | 4H (Four Holes) | - | 9 ～ 291 | 5 ～ 195 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | Adhesive | 8 | 25 ～ 300 | 25 ～ 200 | Shore A90 | Machined Surface / Hole Type | 4H (Four Holes) | 3 | 9 ～ 291 | 5 ～ 195 | - | ||
- | 1 | 9 Days | 10 | Adhesive | 10 | 25 ～ 300 | 25 ～ 200 | Shore A90 | Machined Surface / Hole Type | 4H (Four Holes) | - | 9 ～ 291 | 5 ～ 195 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | Adhesive | 10 | 25 ～ 300 | 25 ～ 200 | Shore A90 | Machined Surface / Hole Type | 4H (Four Holes) | 3 ～ 4 | 9 ～ 291 | 5 ～ 195 | - | ||
- | 1 | 9 Days | 10 | Adhesive | 5 | 10 ～ 200 | 10 ～ 200 | Shore A90 | Machined Surface / Standard Type | No Drilling Alteration | - | - | - | - | ||
- | 1 | 9 Days | 10 | Adhesive | 6 | 10 ～ 200 | 10 ～ 200 | Shore A90 | Machined Surface / Standard Type | No Drilling Alteration | - | - | - | - | ||
- | 1 | 9 Days | 10 | Adhesive | 3 | 25 ～ 300 | 25 ～ 200 | Shore A90 | Machined Surface / Hole Type | 6H (Six Holes) | - | 9 ～ 145 | 5 ～ 191 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | Adhesive | 4 | 25 ～ 300 | 25 ～ 200 | Shore A90 | Machined Surface / Hole Type | 6H (Six Holes) | - | 9 ～ 145 | 5 ～ 191 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | Adhesive | 5 | 25 ～ 300 | 25 ～ 200 | Shore A90 | Machined Surface / Hole Type | 6H (Six Holes) | - | 9 ～ 145 | 5 ～ 191 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | Adhesive | 6 | 25 ～ 300 | 25 ～ 200 | Shore A90 | Machined Surface / Hole Type | 6H (Six Holes) | - | 9 ～ 145 | 5 ～ 191 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | Adhesive | 8 | 25 ～ 300 | 25 ～ 200 | Shore A90 | Machined Surface / Hole Type | 6H (Six Holes) | - | 9 ～ 145 | 5 ～ 191 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | Adhesive | 8 | 25 ～ 300 | 25 ～ 200 | Shore A90 | Machined Surface / Hole Type | 6H (Six Holes) | 3 | 9 ～ 145 | 5 ～ 191 | - | ||
- | 1 | 9 Days | 10 | Adhesive | 10 | 25 ～ 300 | 25 ～ 200 | Shore A90 | Machined Surface / Hole Type | 6H (Six Holes) | - | 9 ～ 145 | 5 ～ 191 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | Adhesive | 10 | 25 ～ 300 | 25 ～ 200 | Shore A90 | Machined Surface / Hole Type | 6H (Six Holes) | 3 ～ 4 | 9 ～ 145 | 5 ～ 191 | - | ||
- | 1 | 9 Days | 10 | Adhesive | 8 | 10 ～ 200 | 10 ～ 200 | Shore A90 | Machined Surface / Standard Type | No Drilling Alteration | - | - | - | - | ||
- | 1 | 9 Days | 10 | Adhesive | 10 | 10 ～ 200 | 10 ～ 200 | Shore A90 | Machined Surface / Standard Type | No Drilling Alteration | - | - | - | - | ||
- | 1 | 9 Days | 10 | No Adhesive | 2 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 1H (1-Hole) | - | 5 ～ 491 | 5 ～ 495 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | No Adhesive | 3 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 1H (1-Hole) | - | 5 ～ 491 | 5 ～ 495 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | No Adhesive | 4 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 1H (1-Hole) | - | 5 ～ 491 | 5 ～ 495 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | No Adhesive | 5 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 1H (1-Hole) | - | 5 ～ 491 | 5 ～ 495 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | No Adhesive | 6 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 1H (1-Hole) | - | 5 ～ 491 | 5 ～ 495 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | No Adhesive | 8 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 1H (1-Hole) | - | 5 ～ 491 | 5 ～ 495 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | No Adhesive | 8 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 1H (1-Hole) | 3 | 5 ～ 491 | 5 ～ 495 | - | ||
- | 1 | 9 Days | 10 | No Adhesive | 10 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 1H (1-Hole) | - | 5 ～ 491 | 5 ～ 495 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | No Adhesive | 10 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 1H (1-Hole) | 3 ～ 4 | 5 ～ 491 | 5 ～ 495 | - | ||
- | 1 | 9 Days | 10 | No Adhesive | 2 | 10 ～ 500 | 10 ～ 500 | Shore A50 | Mold Surface / Standard Type | No Drilling Alteration | - | - | - | - | ||
- | 1 | 9 Days | 10 | No Adhesive | 2 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 2H (Two Holes) | - | 9 ～ 491 | 5 ～ 495 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | No Adhesive | 3 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 2H (Two Holes) | - | 9 ～ 491 | 5 ～ 495 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | No Adhesive | 4 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 2H (Two Holes) | - | 9 ～ 491 | 5 ～ 495 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | No Adhesive | 5 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 2H (Two Holes) | - | 9 ～ 491 | 5 ～ 495 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | No Adhesive | 6 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 2H (Two Holes) | - | 9 ～ 491 | 5 ～ 495 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | No Adhesive | 8 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 2H (Two Holes) | - | 9 ～ 491 | 5 ～ 495 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | No Adhesive | 8 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 2H (Two Holes) | 3 | 9 ～ 491 | 5 ～ 495 | - | ||
- | 1 | 9 Days | 10 | No Adhesive | 10 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 2H (Two Holes) | - | 9 ～ 491 | 5 ～ 495 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | No Adhesive | 10 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 2H (Two Holes) | 3 ～ 4 | 9 ～ 491 | 5 ～ 495 | - | ||
- | 1 | 9 Days | 10 | No Adhesive | 3 | 10 ～ 500 | 10 ～ 500 | Shore A50 | Mold Surface / Standard Type | No Drilling Alteration | - | - | - | - | ||
- | 1 | 9 Days | 10 | No Adhesive | 2 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 3H (Three Holes) | - | 9 ～ 245 | 5 ～ 495 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | No Adhesive | 3 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 3H (Three Holes) | - | 9 ～ 245 | 5 ～ 495 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | No Adhesive | 4 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 3H (Three Holes) | - | 9 ～ 245 | 5 ～ 495 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | No Adhesive | 5 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 3H (Three Holes) | - | 9 ～ 245 | 5 ～ 495 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | No Adhesive | 6 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 3H (Three Holes) | - | 9 ～ 245 | 5 ～ 495 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | No Adhesive | 8 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 3H (Three Holes) | - | 9 ～ 245 | 5 ～ 495 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | No Adhesive | 8 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 3H (Three Holes) | 3 | 9 ～ 245 | 5 ～ 495 | - | ||
- | 1 | 9 Days | 10 | No Adhesive | 10 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 3H (Three Holes) | - | 9 ～ 245 | 5 ～ 495 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | No Adhesive | 10 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 3H (Three Holes) | 3 ～ 4 | 9 ～ 245 | 5 ～ 495 | - | ||
- | 1 | 9 Days | 10 | No Adhesive | 4 | 10 ～ 500 | 10 ～ 500 | Shore A50 | Mold Surface / Standard Type | No Drilling Alteration | - | - | - | - | ||
- | 1 | 9 Days | 10 | No Adhesive | 2 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 4H (Four Holes) | - | 9 ～ 491 | 5 ～ 491 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | No Adhesive | 3 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 4H (Four Holes) | - | 9 ～ 491 | 5 ～ 491 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | No Adhesive | 4 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 4H (Four Holes) | - | 9 ～ 491 | 5 ～ 491 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | No Adhesive | 5 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 4H (Four Holes) | - | 9 ～ 491 | 5 ～ 491 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | No Adhesive | 6 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 4H (Four Holes) | - | 9 ～ 491 | 5 ～ 491 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | No Adhesive | 8 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 4H (Four Holes) | - | 9 ～ 491 | 5 ～ 491 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | No Adhesive | 8 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 4H (Four Holes) | 3 | 9 ～ 491 | 5 ～ 491 | - | ||
- | 1 | 9 Days | 10 | No Adhesive | 10 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 4H (Four Holes) | - | 9 ～ 491 | 5 ～ 491 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | No Adhesive | 10 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 4H (Four Holes) | 3 ～ 4 | 9 ～ 491 | 5 ～ 491 | - | ||
- | 1 | 9 Days | 10 | No Adhesive | 5 | 10 ～ 500 | 10 ～ 500 | Shore A50 | Mold Surface / Standard Type | No Drilling Alteration | - | - | - | - | ||
- | 1 | 9 Days | 10 | No Adhesive | 6 | 10 ～ 500 | 10 ～ 500 | Shore A50 | Mold Surface / Standard Type | No Drilling Alteration | - | - | - | - | ||
- | 1 | 9 Days | 10 | No Adhesive | 2 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 6H (Six Holes) | - | 9 ～ 245 | 5 ～ 491 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | No Adhesive | 3 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 6H (Six Holes) | - | 9 ～ 245 | 5 ～ 491 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | No Adhesive | 4 | 25 ～ 500 | 25 ～ 500 | Shore A50 | Mold Surface / Hole Type | 6H (Six Holes) | - | 9 ～ 245 | 5 ～ 491 | 3 ～ 10 |
Loading...
Back to the Category Panels (polyurethane rubber, rubber, foam, felt)
Technical Drawing - Panels (polyurethane rubber, rubber, foam, felt)
Open the technical drawing in the new window
Specification Tables - Panels (polyurethane rubber, rubber, foam, felt)
T Dimension Tolerance
| T | Tolerance | |
| Mold Surface Type | Machined Surface Type | |
| 2~4 | ±0.3 | ±0.5 |
| 5~10 | ±0.4 | |
A, B Tolerance
| A, B | Tolerance |
| 200 or Less | ±0.5 |
| 201~300 | ±1.0 |
| 301~400 | ±1.2 |
| 401~500 | ±1.5 |
| Part Number | 1mm Increment | ||||
| Type | T | A | B | ||
| 2 | 10~500 | 10~500 | |||
| No Adhesive | Adhesive | 3 | |||
| UTSCS | UTSCSA | (Shore A95) | 4 | ||
| UTSCH | UTSCHA | (Shore A90) | 5 | ||
| UTSCM | UTSCMA | (Shore A70) | 6 | ||
| UTSCL | UTSCLA | (Shore A50) | 8 | ||
| 10 | |||||
■Standard Type, Machined Surface
| Part Number | 1mm Increment | ||||
| Type | T | A | B | ||
| No Adhesive UTSCSK UTSCHK UTSCMK UTSCLK | Adhesive UTSCSKA UTSCHKA UTSCMKA UTSCLKA | (Shore A95) (Shore A90) (Shore A70) (Shore A50) | 3 | 10~200 | 10~200 |
| 4 | |||||
| 5 | |||||
| 6 | |||||
| 8 | |||||
| 10 | |||||
■Hole Type, Mold Surface
| Part Number | 1mm Increment (A≥B≥T) | 0.5mm Increment | Screw Nominal Dia. Selection | ||||||||
| Type | Nominal | T | A | B | F | G | N (Through Hole) | Z (Counterbored Hole) | |||
| Mold Surface Type | 1H 2H 3H 4H 6H | 2 | 25~500 | 25~500 | 5~495 (1H) 9~491 (2H, 4H) 9~245 (3H, 6H) | 5~495 (1H, 2H, 3H) 9~491 (4H, 6H) | 3 4 5 6 8 10 | - | |||
| No Adhesive UTSCS UTSCH UTSCM UTSCL | Adhesive UTSCSA UTSCHA UTSCMA UTSCLA | (Shore A95) (Shore A90) (Shore A70) (Shore A50) | 3 | - | |||||||
| 4 | - | ||||||||||
| 5 | - | ||||||||||
| 6 | - | ||||||||||
| 8 | 3 | ||||||||||
| 10 | 3 | 4 | |||||||||
■Hole Type, Machined Surface
| Part Number | 1mm Increment (A≥B≥T) | 0.5mm Increment | Screw Nominal Dia. Selection | ||||||||
| Type | Nominal | T | A | B | F | G | N (Through Hole) | Z (Counterbored Hole) | |||
| Machined Surface Type | 1H 2H 3H 4H 6H | 3 | 25~200 | 25~200 | 5~195 (1H) 9~191 (2H, 4H) 9~95 (3H, 6H) | 5~195 (1H, 2H, 3H) 9~191 (4H, 6H) | 3 4 5 6 8 10 | - | |||
| No Adhesive UTSCSK UTSCHK UTSCMK UTSCLK | Adhesive UTSCSKA UTSCHKA UTSCMKA UTSCLKA | (Shore A95) (Shore A90) (Shore A70) (Shore A50) | 4 | - | |||||||
| 5 | - | ||||||||||
| 6 | - | ||||||||||
| 8 | 3 | ||||||||||
| 10 | 3 | 4 | |||||||||
Basic information
| Material | Urethane | Grade, Type | Ceramic Urethane |
|---|
Configure
Basic Attributes
-
With or w/o Adhesive
- Adhesive
- No Adhesive
-
Thickness T(mm)
-
Width A(mm)
-
Length B(mm)
-
Hardness (Shore, Asker, Penetration)
-
Specifications
-
Hole Machining
- 1H (1-Hole)
- 2H (Two Holes)
- 3H (Three Holes)
- 4H (Four Holes)
- 6H (Six Holes)
- No Drilling Alteration
-
Counterbored Hole Nominal Dia. [Z]
-
F(mm)
-
G(mm)
-
Through Hole Nominal Dia. [N]
-
Type
- UTSCH
- UTSCH1H
- UTSCH2H
- UTSCH3H
- UTSCH4H
- UTSCH6H
- UTSCHA
- UTSCHA1H
- UTSCHA2H
- UTSCHA3H
- UTSCHA4H
- UTSCHA6H
- UTSCHK
- UTSCHK1H
- UTSCHK2H
- UTSCHK3H
- UTSCHK4H
- UTSCHK6H
- UTSCHKA
- UTSCHKA1H
- UTSCHKA2H
- UTSCHKA3H
- UTSCHKA4H
- UTSCHKA6H
- UTSCL
- UTSCL1H
- UTSCL2H
- UTSCL3H
- UTSCL4H
- UTSCL6H
- UTSCLA
- UTSCLA1H
- UTSCLA2H
- UTSCLA3H
- UTSCLA4H
- UTSCLA6H
- UTSCLK
- UTSCLK1H
- UTSCLK2H
- UTSCLK3H
- UTSCLK4H
- UTSCLK6H
- UTSCLKA
- UTSCLKA1H
- UTSCLKA2H
- UTSCLKA3H
- UTSCLKA4H
- UTSCLKA6H
- UTSCM
- UTSCM1H
- UTSCM2H
- UTSCM3H
- UTSCM4H
- UTSCM6H
- UTSCMA
- UTSCMA1H
- UTSCMA2H
- UTSCMA3H
- UTSCMA4H
- UTSCMA6H
- UTSCMK
- UTSCMK1H
- UTSCMK2H
- UTSCMK3H
- UTSCMK4H
- UTSCMK6H
- UTSCMKA
- UTSCMKA1H
- UTSCMKA2H
- UTSCMKA3H
- UTSCMKA4H
- UTSCMKA6H
- UTSCS
- UTSCS1H
- UTSCS2H
- UTSCS3H
- UTSCS4H
- UTSCS6H
- UTSCSA
- UTSCSA1H
- UTSCSA2H
- UTSCSA3H
- UTSCSA4H
- UTSCSA6H
- UTSCSK
- UTSCSK1H
- UTSCSK2H
- UTSCSK3H
- UTSCSK4H
- UTSCSK6H
- UTSCSKA
- UTSCSKA1H
- UTSCSKA2H
- UTSCSKA3H
- UTSCSKA4H
- UTSCSKA6H
-
Filter by CAD data type
- 2D
- 3D
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently Asked Questions (FAQ)
-
Question:
How can you attach a rubber plate?
-
Answer:
A rubber plate can be attached with double-adhesive tape. MISUMI offers rubber plates with configurable through holes or counterbores with adhesive tape.
-
Question:
Do you have screw-on rubber panels?
-
Answer:
MISUMI offers rubber plates that can be screwed on via a through hole or counterbore. The rubber plates with counterbores are well suited for applications that need to form a flat surface.
-
Question:
Is NBR oil-resistant?
-
Answer:
The NBR rubber is oil-resistant and is often used as a sealing material for rubber or foam. In addition, NBR has good thermal resistance, which in combination with high abrasion resistance is the best suited NBR material for seals.
-
Question:
Which material reduces vibrations well?
-
Answer:
Silicone gel vibration dampers reduce vibrations well. This elastic material reduces the transmission of vibrations to the subsequent component and also contributes to the acoustics.
-
Question:
What is Vulkollan?
-
Answer:
Vulkollan is a highly abrasion-resistant polyurethane rubber that has high wear resistance. It is one of the high-performance rubbers that has little pressure deformation and can withstand high impact forces. In addition, Vulkollan has a high tear strength. However, over time Vulkollan may change its colour, but without losing its mechanical properties.
Complementary Products
-
Socket Head Cap Screws, Hex Screws, Nuts, Washers, Spring Washers - 1.4404 Equivalent
MISUMI Standard Price : 0.75 € Shipping Days: Same day
Tech Support
Způsob platby
Platba na účet
Zálohová platba
Výroba na vyžádání
Certifikáty
Copyright © MISUMI Corporation Všechna práva vyhrazena.