Plates / Ceramic PUR / Ether, Ester / A50, A70, A90, A95 / adhesive layer (Part Numbers - CAD Download)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Back to the Category Panels (polyurethane rubber, rubber, foam, felt)

Technical Drawing - Panels (polyurethane rubber, rubber, foam, felt)

Ceramic Urethane Sheets:Related Image
Open the technical drawing in the new window

Available dimensions and tolerances can be found under the tab More information.
 

Basic Properties (e.g., material, hardness, coating, tolerance) - Panels (polyurethane rubber, rubber, foam, felt)

TypeTypeMaterialHardnessColor
No AdhesiveAdhesive
Mold Surface TypeUTSCSUTSCSACeramic Urethane
(Ether Polyurethane)
Shore A95Natural Color (Gray)
UTSCHUTSCHAShore A90
UTSCMUTSCMACeramic Urethane
(Ester Polyurethane)
Shore A70
UTSCLUTSCLAShore A50
Machined Surface TypeUTSCSKUTSCSKACeramic Urethane
(Ether Polyurethane)
Shore A95
UTSCHKUTSCHKAShore A90
UTSCMKUTSCMKACeramic Urethane
(Ester Polyurethane)
Shore A70
UTSCLKUTSCLKAShore A50
Properties >> P.389
Mold Surface Type has glossy smooth surface but not slippery. Machined Surface Type has ground surface on one side improving sliding property.

Further specifications can be found under the tab More information.
 

Composition of a Product Code - Panels (polyurethane rubber, rubber, foam, felt)

■Standard
Part Number-A-B
UTSCLK5-100-30
■Hole Type
Part Number-A-B-F-G-Screw Nominal Dia.
UTSCMK2H5-100-50-F80-G25-N3
 

General Information - Panels (polyurethane rubber, rubber, foam, felt)

 

Selection details of panels (polyurethane rubber, rubber, foam, felt)

- Material: polyurethane rubber (PU/PUR), heat-resistant polyurethane rubber, low-impact polyurethane rubber, abrasion-resistant polyurethane rubber, antistatic polyurethane, nitrile (NBR), chloroprene rubber (CR), polyethylene (EPDM), silicone (SI), fluorine (FPM), butyl rubber (IIR), natural rubber (NR), hard rubber, special synthetic rubber, polyurethane foam, head-insulating foam, polyethylene foam, low-rebound foam

- Thickness (mm): 0.5 to 50

- Width (mm): 3 to 500

- Length (mm): 10 to 2000

 

Description/Basics

Foam plates and rubber plates are provided for damping or for sound proofing. MISUMI offers these in various Shore hardening for a wide variety of tasks. Due to the variety of materials, different resistances to environmental influences are possible depending on the application. The foam plates reduce sound in machines and can reduce the sound emissions of a system. For more information on foam characteristics, follow this link.
Rubber plates or foam plates are also suitable in conveyor systems to absorb components to be transported at a dampened level or to protect them from damage as a lateral guide when the components bump into each other. Hard rubber panels or low-impact rubber or foam panels reduce the impact energy of the components. These minimize and lower the vibrations in an application.
In addition, MISUMI offers highly abrasion-resistant polyurethane (Vulkollan), which has an abrasion resistance that is six times higher than with conventional polyurethane.
Ceramic polyurethane plates contain ceramic particles. After machining, these can have a smooth surface despite low Shore hardness.
The polyurethane rubber plates are also available antistatically. The specific resistance of antistatic polyurethane plates prevents static charging. This prevents any damage to electronic components.
For applications with higher temperatures, MISUMI offers heat-resistant polyurethane rubber, which can withstand a temperature range of up to approx. ~120°C (see the product specifications for exact information).
MISUMI also offers low-friction and anti-friction rubber plates. Low-friction rubber plates are often used in the gentle component guide for belt conveyors and roller conveyors.
Felt plates have the property of absorbing or dispensing oil and other liquids via the capillary effect. This property can be used to remove, for example, excess oil on a belt conveyor.

In addition, MISUMI offers rubber plates and foam plates that are self-adhesive for simplified assembly. Furthermore, you will find double-adhesive tape for attaching rubber plates and foam plates.

Additional properties on foam panels and rubber plates can be found in the Properties PDF.

MISUMI also offers these products in a round shape as discs and sleeves made of rubber, natural rubber, foam and felt.

 

Application Examples - Panels (polyurethane rubber, rubber, foam, felt)

Application example
(1) Low-friction rubber plate (2) belt conveyor

Application example
(1) Vibration damping plate

 

Industrial Applications

3D printer industry
Automotive industry
Pharmaceutical industry
Packaging industry

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...
Part Number
UTSCMA4H8-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-491/0.5]-Z3
UTSCMA4H10-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMA4H10-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-491/0.5]-Z[3,​4]
UTSCMA5-[10-500/1]-[10-500/1]
UTSCMA6-[10-500/1]-[10-500/1]
UTSCMA6H2-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMA6H3-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMA6H4-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMA6H5-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMA6H6-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMA6H8-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMA6H8-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-491/0.5]-Z3
UTSCMA6H10-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-491/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMA6H10-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-491/0.5]-Z[3,​4]
UTSCMA8-[10-500/1]-[10-500/1]
UTSCMA10-[10-500/1]-[10-500/1]
UTSCMK1H3-[25-300/1]-[25-200/1]-F[5-291/0.5]-G[5-195/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMK1H4-[25-300/1]-[25-200/1]-F[5-291/0.5]-G[5-195/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMK1H5-[25-300/1]-[25-200/1]-F[5-291/0.5]-G[5-195/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMK1H6-[25-300/1]-[25-200/1]-F[5-291/0.5]-G[5-195/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMK1H8-[25-300/1]-[25-200/1]-F[5-291/0.5]-G[5-195/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMK1H8-[25-300/1]-[25-200/1]-F[5-291/0.5]-G[5-195/0.5]-Z3
UTSCMK1H10-[25-300/1]-[25-200/1]-F[5-291/0.5]-G[5-195/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMK1H10-[25-300/1]-[25-200/1]-F[5-291/0.5]-G[5-195/0.5]-Z[3,​4]
UTSCMK2H3-[25-300/1]-[25-200/1]-F[9-291/0.5]-G[5-195/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMK2H4-[25-300/1]-[25-200/1]-F[9-291/0.5]-G[5-195/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMK2H5-[25-300/1]-[25-200/1]-F[9-291/0.5]-G[5-195/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMK2H6-[25-300/1]-[25-200/1]-F[9-291/0.5]-G[5-195/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMK2H8-[25-300/1]-[25-200/1]-F[9-291/0.5]-G[5-195/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMK2H8-[25-300/1]-[25-200/1]-F[9-291/0.5]-G[5-195/0.5]-Z3
UTSCMK2H10-[25-300/1]-[25-200/1]-F[9-291/0.5]-G[5-195/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMK2H10-[25-300/1]-[25-200/1]-F[9-291/0.5]-G[5-195/0.5]-Z[3,​4]
UTSCMK3-[10-200/1]-[10-200/1]
UTSCMK3H3-[25-300/1]-[25-200/1]-F[9-145/0.5]-G[5-195/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMK3H4-[25-300/1]-[25-200/1]-F[9-145/0.5]-G[5-195/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMK3H5-[25-300/1]-[25-200/1]-F[9-145/0.5]-G[5-195/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMK3H6-[25-300/1]-[25-200/1]-F[9-145/0.5]-G[5-195/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMK3H8-[25-300/1]-[25-200/1]-F[9-145/0.5]-G[5-195/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMK3H8-[25-300/1]-[25-200/1]-F[9-145/0.5]-G[5-195/0.5]-Z[3,​4]
UTSCMK3H10-[25-300/1]-[25-200/1]-F[9-145/0.5]-G[5-195/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMK3H10-[25-300/1]-[25-200/1]-F[9-145/0.5]-G[5-195/0.5]-Z[3,​4]
UTSCMK4-[10-200/1]-[10-200/1]
UTSCMK4H3-[10-500/1]-[10-500/1]-F[9-291/0.5]-G[5-195/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMK4H4-[25-300/1]-[25-200/1]-F[9-291/0.5]-G[5-195/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMK4H5-[25-300/1]-[25-200/1]-F[9-291/0.5]-G[5-195/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMK4H6-[25-300/1]-[25-200/1]-F[9-291/0.5]-G[5-195/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMK4H8-[25-300/1]-[25-200/1]-F[9-291/0.5]-G[5-195/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMK4H8-[25-300/1]-[25-200/1]-F[9-291/0.5]-G[5-195/0.5]-Z3
UTSCMK4H10-[25-300/1]-[25-200/1]-F[9-291/0.5]-G[5-195/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMK4H10-[25-300/1]-[25-200/1]-F[9-291/0.5]-G[5-195/0.5]-Z[3,​4]
UTSCMK5-[10-200/1]-[10-200/1]
UTSCMK6-[10-200/1]-[10-200/1]
UTSCMK6H3-[25-300/1]-[25-200/1]-F[9-145/0.5]-G[5-191/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMK6H4-[25-300/1]-[25-200/1]-F[9-145/0.5]-G[5-191/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMK6H5-[25-300/1]-[25-200/1]-F[9-145/0.5]-G[5-191/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMK6H6-[25-300/1]-[25-200/1]-F[9-145/0.5]-G[5-191/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMK6H8-[25-300/1]-[25-200/1]-F[9-145/0.5]-G[5-191/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMK6H8-[25-300/1]-[25-200/1]-F[9-145/0.5]-G[5-191/0.5]-Z3
UTSCMK6H10-[25-300/1]-[25-200/1]-F[9-145/0.5]-G[5-191/0.5]-N[3,​4,​5,​6,​8,​10]
UTSCMK6H10-[25-300/1]-[25-200/1]-F[9-145/0.5]-G[5-191/0.5]-Z[3,​4]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSWith or w/o Adhesive Thickness T
(mm)
Width A
(mm)
Length B
(mm)
Hardness (Shore, Asker, Penetration) Specifications Hole Machining Counterbored Hole Nominal Dia. [Z] F
(mm)
G
(mm)
Through Hole Nominal Dia. [N]

-

1 9 Days 10Adhesive825 ~ 50025 ~ 500Shore A70Mold Surface / Hole Type4H (Four Holes)39 ~ 4915 ~ 491-

-

1 9 Days 10Adhesive1025 ~ 50025 ~ 500Shore A70Mold Surface / Hole Type4H (Four Holes)-9 ~ 4915 ~ 4913 ~ 10

-

1 9 Days 10Adhesive1025 ~ 50025 ~ 500Shore A70Mold Surface / Hole Type4H (Four Holes)3 ~ 49 ~ 4915 ~ 491-

-

1 9 Days 10Adhesive510 ~ 50010 ~ 500Shore A70Mold Surface / Standard TypeNo Drilling Alteration----

-

1 9 Days 10Adhesive610 ~ 50010 ~ 500Shore A70Mold Surface / Standard TypeNo Drilling Alteration----

-

1 9 Days 10Adhesive225 ~ 50025 ~ 500Shore A70Mold Surface / Hole Type6H (Six Holes)-9 ~ 2455 ~ 4913 ~ 10

-

1 9 Days 10Adhesive325 ~ 50025 ~ 500Shore A70Mold Surface / Hole Type6H (Six Holes)-9 ~ 2455 ~ 4913 ~ 10

-

1 9 Days 10Adhesive425 ~ 50025 ~ 500Shore A70Mold Surface / Hole Type6H (Six Holes)-9 ~ 2455 ~ 4913 ~ 10

-

1 9 Days 10Adhesive525 ~ 50025 ~ 500Shore A70Mold Surface / Hole Type6H (Six Holes)-9 ~ 2455 ~ 4913 ~ 10

-

1 9 Days 10Adhesive625 ~ 50025 ~ 500Shore A70Mold Surface / Hole Type6H (Six Holes)-9 ~ 2455 ~ 4913 ~ 10

-

1 9 Days 10Adhesive825 ~ 50025 ~ 500Shore A70Mold Surface / Hole Type6H (Six Holes)-9 ~ 2455 ~ 4913 ~ 10

-

1 9 Days 10Adhesive825 ~ 50025 ~ 500Shore A70Mold Surface / Hole Type6H (Six Holes)39 ~ 2455 ~ 491-

-

1 9 Days 10Adhesive1025 ~ 50025 ~ 500Shore A70Mold Surface / Hole Type6H (Six Holes)-9 ~ 2455 ~ 4913 ~ 10

-

1 9 Days 10Adhesive1025 ~ 50025 ~ 500Shore A70Mold Surface / Hole Type6H (Six Holes)3 ~ 49 ~ 2455 ~ 491-

-

1 9 Days 10Adhesive810 ~ 50010 ~ 500Shore A70Mold Surface / Standard TypeNo Drilling Alteration----

-

1 9 Days 10Adhesive1010 ~ 50010 ~ 500Shore A70Mold Surface / Standard TypeNo Drilling Alteration----

-

1 9 Days 10No Adhesive325 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type1H (1-Hole)-5 ~ 2915 ~ 1953 ~ 10

-

1 9 Days 10No Adhesive425 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type1H (1-Hole)-5 ~ 2915 ~ 1953 ~ 10

-

1 9 Days 10No Adhesive525 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type1H (1-Hole)-5 ~ 2915 ~ 1953 ~ 10

-

1 9 Days 10No Adhesive625 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type1H (1-Hole)-5 ~ 2915 ~ 1953 ~ 10

-

1 9 Days 10No Adhesive825 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type1H (1-Hole)-5 ~ 2915 ~ 1953 ~ 10

-

1 9 Days 10No Adhesive825 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type1H (1-Hole)35 ~ 2915 ~ 195-

-

1 9 Days 10No Adhesive1025 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type1H (1-Hole)-5 ~ 2915 ~ 1953 ~ 10

-

1 9 Days 10No Adhesive1025 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type1H (1-Hole)3 ~ 45 ~ 2915 ~ 195-

-

1 9 Days 10No Adhesive325 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type2H (Two Holes)-9 ~ 2915 ~ 1953 ~ 10

-

1 9 Days 10No Adhesive425 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type2H (Two Holes)-9 ~ 2915 ~ 1953 ~ 10

-

1 9 Days 10No Adhesive525 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type2H (Two Holes)-9 ~ 2915 ~ 1953 ~ 10

-

1 9 Days 10No Adhesive625 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type2H (Two Holes)-9 ~ 2915 ~ 1953 ~ 10

-

1 9 Days 10No Adhesive825 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type2H (Two Holes)-9 ~ 2915 ~ 1953 ~ 10

-

1 9 Days 10No Adhesive825 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type2H (Two Holes)39 ~ 2915 ~ 195-

-

1 9 Days 10No Adhesive1025 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type2H (Two Holes)-9 ~ 2915 ~ 1953 ~ 10

-

1 9 Days 10No Adhesive1025 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type2H (Two Holes)3 ~ 49 ~ 2915 ~ 195-

-

1 9 Days 10No Adhesive310 ~ 20010 ~ 200Shore A70Machined Surface / Standard TypeNo Drilling Alteration----

-

1 9 Days 10No Adhesive325 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type3H (Three Holes)-9 ~ 1455 ~ 1953 ~ 10

-

1 9 Days 10No Adhesive425 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type3H (Three Holes)-9 ~ 1455 ~ 1953 ~ 10

-

1 9 Days 10No Adhesive525 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type3H (Three Holes)-9 ~ 1455 ~ 1953 ~ 10

-

1 9 Days 10No Adhesive625 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type3H (Three Holes)-9 ~ 1455 ~ 1953 ~ 10

-

1 9 Days 10No Adhesive825 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type3H (Three Holes)-9 ~ 1455 ~ 1953 ~ 10

-

1 9 Days 10No Adhesive825 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type3H (Three Holes)3 ~ 49 ~ 1455 ~ 195-

-

1 9 Days 10No Adhesive1025 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type3H (Three Holes)-9 ~ 1455 ~ 1953 ~ 10

-

1 9 Days 10No Adhesive1025 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type3H (Three Holes)3 ~ 49 ~ 1455 ~ 195-

-

1 9 Days 10No Adhesive410 ~ 20010 ~ 200Shore A70Machined Surface / Standard TypeNo Drilling Alteration----

-

1 9 Days 10No Adhesive310 ~ 50010 ~ 500Shore A70Machined Surface / Hole Type4H (Four Holes)-9 ~ 2915 ~ 1953 ~ 10

-

1 9 Days 10No Adhesive425 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type4H (Four Holes)-9 ~ 2915 ~ 1953 ~ 10

-

1 9 Days 10No Adhesive525 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type4H (Four Holes)-9 ~ 2915 ~ 1953 ~ 10

-

1 9 Days 10No Adhesive625 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type4H (Four Holes)-9 ~ 2915 ~ 1953 ~ 10

-

1 9 Days 10No Adhesive825 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type4H (Four Holes)-9 ~ 2915 ~ 1953 ~ 10

-

1 9 Days 10No Adhesive825 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type4H (Four Holes)39 ~ 2915 ~ 195-

-

1 9 Days 10No Adhesive1025 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type4H (Four Holes)-9 ~ 2915 ~ 1953 ~ 10

-

1 9 Days 10No Adhesive1025 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type4H (Four Holes)3 ~ 49 ~ 2915 ~ 195-

-

1 9 Days 10No Adhesive510 ~ 20010 ~ 200Shore A70Machined Surface / Standard TypeNo Drilling Alteration----

-

1 9 Days 10No Adhesive610 ~ 20010 ~ 200Shore A70Machined Surface / Standard TypeNo Drilling Alteration----

-

1 9 Days 10No Adhesive325 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type6H (Six Holes)-9 ~ 1455 ~ 1913 ~ 10

-

1 9 Days 10No Adhesive425 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type6H (Six Holes)-9 ~ 1455 ~ 1913 ~ 10

-

1 9 Days 10No Adhesive525 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type6H (Six Holes)-9 ~ 1455 ~ 1913 ~ 10

-

1 9 Days 10No Adhesive625 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type6H (Six Holes)-9 ~ 1455 ~ 1913 ~ 10

-

1 9 Days 10No Adhesive825 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type6H (Six Holes)-9 ~ 1455 ~ 1913 ~ 10

-

1 9 Days 10No Adhesive825 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type6H (Six Holes)39 ~ 1455 ~ 191-

-

1 9 Days 10No Adhesive1025 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type6H (Six Holes)-9 ~ 1455 ~ 1913 ~ 10

-

1 9 Days 10No Adhesive1025 ~ 30025 ~ 200Shore A70Machined Surface / Hole Type6H (Six Holes)3 ~ 49 ~ 1455 ~ 191-

Loading...

Back to the Category Panels (polyurethane rubber, rubber, foam, felt)

Technical Drawing - Panels (polyurethane rubber, rubber, foam, felt)

Ceramic Urethane Sheets:Related Image
Open the technical drawing in the new window

Specification Tables - Panels (polyurethane rubber, rubber, foam, felt)

■Accuracy Standards
T Dimension Tolerance
TTolerance
Mold Surface TypeMachined Surface Type
2~4±0.3±0.5
5~10±0.4

A, B Tolerance
A, BTolerance
200 or Less±0.5
201~300±1.0
301~400±1.2
401~500±1.5
■Standard Type, Mold Surface
Part Number1mm Increment
TypeTAB
   210~50010~500
No AdhesiveAdhesive 3
UTSCSUTSCSA(Shore A95)4
UTSCHUTSCHA(Shore A90)5
UTSCMUTSCMA(Shore A70)6
UTSCLUTSCLA(Shore A50)8
   10

■Standard Type, Machined Surface
Part Number1mm Increment
TypeTAB
No Adhesive
UTSCSK
UTSCHK
UTSCMK
UTSCLK
Adhesive
UTSCSKA
UTSCHKA
UTSCMKA
UTSCLKA

(Shore A95)
(Shore A90)
(Shore A70)
(Shore A50)
310~20010~200
4
5
6
8
10

■Hole Type, Mold Surface
Part Number1mm Increment (A≥B≥T)0.5mm IncrementScrew Nominal Dia. Selection
TypeNominalTABFGN (Through Hole)Z (Counterbored Hole)
Mold Surface Type1H

2H

3H

4H

6H
225~50025~5005~495
(1H)

9~491
(2H, 4H)

9~245
(3H, 6H)
5~495
(1H, 2H, 3H)

9~491
(4H, 6H)
3
4
5
6
8
10
-
No Adhesive
UTSCS
UTSCH
UTSCM
UTSCL
Adhesive
UTSCSA
UTSCHA
UTSCMA
UTSCLA

(Shore A95)
(Shore A90)
(Shore A70)
(Shore A50)
3-
4-
5-
6-
83 
1034

■Hole Type, Machined Surface
Part Number1mm Increment (A≥B≥T)0.5mm IncrementScrew Nominal Dia. Selection
TypeNominalTABFGN (Through Hole)Z (Counterbored Hole)
Machined Surface Type1H

2H

3H

4H

6H
325~20025~2005~195
(1H)

9~191
(2H, 4H)

9~95
(3H, 6H)
5~195
(1H, 2H, 3H)

9~191
(4H, 6H)
3
4
5
6
8
10
-
No Adhesive
UTSCSK
UTSCHK
UTSCMK
UTSCLK
Adhesive
UTSCSKA
UTSCHKA
UTSCMKA
UTSCLKA

(Shore A95)
(Shore A90)
(Shore A70)
(Shore A50)
4-
5-
6-
83 
1034

Basic information

Material Urethane Grade, Type Ceramic Urethane

Frequently Asked Questions (FAQ)

Question:

How can you attach a rubber plate?

Answer:

A rubber plate can be attached with double-adhesive tape. MISUMI offers rubber plates with configurable through holes or counterbores with adhesive tape.

Question:

Do you have screw-on rubber panels?

Answer:

MISUMI offers rubber plates that can be screwed on via a through hole or counterbore. The rubber plates with counterbores are well suited for applications that need to form a flat surface.

Question:

Is NBR oil-resistant?

Answer:

The NBR rubber is oil-resistant and is often used as a sealing material for rubber or foam. In addition, NBR has good thermal resistance, which in combination with high abrasion resistance is the best suited NBR material for seals.

Question:

Which material reduces vibrations well?

Answer:

Silicone gel vibration dampers reduce vibrations well. This elastic material reduces the transmission of vibrations to the subsequent component and also contributes to the acoustics.

Question:

What is Vulkollan?

Answer:

Vulkollan is a highly abrasion-resistant polyurethane rubber that has high wear resistance. It is one of the high-performance rubbers that has little pressure deformation and can withstand high impact forces. In addition, Vulkollan has a high tear strength. However, over time Vulkollan may change its colour, but without losing its mechanical properties.

Show more FAQ Close

Complementary Products

MISUMI Unit еxample related to this product

Tech Support