Timing Belt Conveyors / GV Series / Dual Track / Center Drive / 2-Groove Frame (Pulley Dia. 30mm) / GVTWNUE / GVTWNSE

Manuals

(i)Remark

Latest part number of conveyor is adding "E" to end of the original part number.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
Shipping Days

GVTWNUE (Inboard Motor Type) / GVTWNSE (Outboard Motor Type)
Each slot has 4 nuts inserted.
The lengths of the conveyor belts on either sides of this product are different.
Please take care when removing the plastic cover, as it is relatively fragile.
When L≥1,400, it is recommended to mount on at least 2 stands.

*A Dimension Details

Output (W)	Motor		Reduction Ratio	A
	Specifications	Manufacturer
6 W	Constant speed motor	Oriental	25~180	115.0
	Variable speed motor	Oriental	25~180	125.0
25 W	Constant speed motor	Panasonic	5~180	115.0
		Oriental	5~18	117.0
			25~180	127.5
	Variable speed motor
		Oriental	5~18	127.0
			25~180	137.5

For accumulation conveyance (only compatible with sliding belts), consider conveying capacity to be no more than 1/2 of that shown in the graph.
Conveying capacity may vary depending on operating conditions.
This graph shows conveying capacity when level.

■Gearhead Reduction Ratio *Reference Value
*Conveyance speed reference values are based on IM (motor rotational speed 1,500 rpm [50 Hz]/1,800 rpm [60 Hz]).
*May decrease depending on load condition.

Gearhead Reduction Ratio	Belt Speed (m/min)
Gearhead Reduction Ratio	50Hz	60Hz
5	30.0	36.0
7.5	20.0	24.0
9	16.7	20.0
12.5	12.0	14.4
15	10.0	12.0
18	8.3	10.0
25	6.0	7.2
30	5.0	6.0
36	4.2	5.0
50	3.0	3.6
60	2.5	3.0
75	2.0	2.4
90	1.7	2.0
100	1.5	1.8
120	1.2	1.5
150	1.0	1.2
180	0.8	1.0

For motor specification IM, the above conveyance speeds are constant speeds.
For motor specification SCM, refer to the above values for the maximum speed.
Motor specification SCM is adjustable up to (1/15) × (max. speed). The weight that can be conveyed decreases as speed decreases.

	Frame	Motor Cover	Pulley Holder
Material	Aluminum	Aluminum	Aluminum
Surface Treatment	Clear Anodize	Painted	Painted

Specifications

Part Number	-	B	-	L	-	Motor							-	Belt Specifications	-	Motor Manufacturer Selection	(	-	Alterations	)

						Output	-	Voltage	-	Specifications	-	Gearhead Reduction Ratio
GVTWNSE	-	300	-	2000	-	25	-	TA230	-	IM	-	5	-	H	-	B	(	-	MP · FYA · FYB · PK · NA · WA		)

Part Number

B
10 mm Increments

L
5 mm Increments

Motor

Belt Specifications

Motor Manufacturer Selection
The prices vary by
manufacturer.

Output (W)

Voltage (V)

Specifications

Gearhead Reduction Ratio

GVTWNUE
(Inboard Motor Type)

GVTWNSE
(Outboard Motor Type)

50~300

280~2000

TA230
(Simgle-phase)*

IM
(Constant Speed Motor)
SCM
(Variable Speed Motor)

25
60
120

30
75
150

36
90
180

50
100

H (General Purpose, Translucent)
S (For Sliding, Green)
J (No Belt)

B (Oriental Motor)

TA230
(Simgle-phase)*

IM
(Constant Speed Motor)
SCM
(Variable Speed Motor)

5
18
60
120

7.5
25
75
150

9
30
90
180

12.5
36
100

15
50

A (Panasonic Motor)
B (Oriental Motor)
When motor specification is SCM (Variable Speed Motor),A (Panasonic Motor) is not applicable.

6
25

NV
(No Motor)

NM (No Motor)

NH (No Gearhead)

R (No Motor, Gearhead)

Connect the motor so that the belt rotates in the direction of conveyance.
When "No motor, gearhead" is selected, the motor mounting hole pitch will vary depending on the motor output. For the dimension details, see Technical Information in our Conveyor Selection web site.
When "No motor, gearhead" is selected, this unit will be delivered unassembled. The customer is to assemble the unit by following instructions on the included assembly procedure manual. See our Conveyor Selection site for packaging details.
Mounting brackets for speed controllers are not included with the variable speed motor. When mounting brackets for speed controllers are required, select [SCB] as an alteration.
Regardless of belt specifications, it is not recommended to use the belt while the conveyor is tilted.

■Conveyor weight
*Reference values (vary depending on motor manufacturer) (kg)

Belt width B (mm)	Conveyor length L (mm)
Belt width B (mm)	500	1000	1500	2000
100	3.5	4.5	5.5	6.4
200	3.8	4.7	5.7	6.7
300	4.0	5.0	6.0	7.0

*When the motor output is 25 W, add 1.5 kg.

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
GVTWNSE-[50-300/10]-[280-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-[H,J,S]-[B,R]
GVTWNSE-[50-300/10]-[280-2000/5]-[6,25]-TA230-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-[H,J,S]-[B,R]
GVTWNUE-[50-300/10]-[280-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-[H,J,S]-[B,R]
GVTWNUE-[50-300/10]-[280-2000/5]-[6,25]-TA230-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-[H,J,S]-[B,R]

Minimum order quantity	Standard Shipping Days ?	[B] Belt Width (mm)	[L] Conveyer Length (mm)	Belt Type	Motor Output (W)	[TA] Motor Voltage (Single-Phase) (V)	Motor Voltage (No Motor)	Motor Type	Gearhead Reduction Ratio	Motor Manufacturer Selection	Belt Specification	Belt Specifications
1	12 Days	50 ～ 300	280 ～ 2000	-	6 ～ 25	-	[NV] No Motor	[IM] Constant Speed Motor / [NM] No Motor / [SCM] Variable Speed Motor	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / [NH] No Gear Heads	[B] Oriental Motor / [R] No Motor Gearhead	[S] For Sliding - Green	[H] General Purpose - Translucent / [J] No Belt
1	12 Days	50 ～ 300	280 ～ 2000	-	6 ～ 25	230	-	[IM] Constant Speed Motor / [NM] No Motor / [SCM] Variable Speed Motor	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / [NH] No Gear Heads	[B] Oriental Motor / [R] No Motor Gearhead	[S] For Sliding - Green	[H] General Purpose - Translucent / [J] No Belt
1	12 Days	50 ～ 300	280 ～ 2000	Flat Belt	6 ～ 25	-	[NV] No Motor	[IM] Constant Speed Motor / [NM] No Motor / [SCM] Variable Speed Motor	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / [NH] No Gear Heads	[B] Oriental Motor / [R] No Motor Gearhead	[S] For Sliding - Green	[H] General Purpose - Translucent / [J] No Belt
1	12 Days	50 ～ 300	280 ～ 2000	Flat Belt	6 ～ 25	230	-	[IM] Constant Speed Motor / [NM] No Motor / [SCM] Variable Speed Motor	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / [NH] No Gear Heads	[B] Oriental Motor / [R] No Motor Gearhead	[S] For Sliding - Green	[H] General Purpose - Translucent / [J] No Belt

Price List

Part Number

Available Sizes

L280~
300

L305~
400

L405~
500

L505~
600

L605~
700

L705~
800

L805~
900

L905~
1000

L1005~
1100

L1105~
1200

L1205~
1300

L1305~
1400

L1405~
1500

L1505~
1600

L1605~
1700

L1705~
1800

L1805~
1900

L1905~
2000

GVTWNUE
GVTWNSE

50~100

○

110~150

○

160~200

○

210~250

○

260~300

○

Basic information

Driving Type	Multi-Track Center Drive	Max. Mass of Conveyed Material(kg)	15	With Meandering Prevention Crosspiece	Pulleys crowned for meandering prevention
Tail Roller Dia. D (Tail Transfer Part R)(mm)	30	Drive Roller Dia.(mm)	30	Reverse Switch Option	Not Provided

Configure

4Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

[B] Belt Width(mm)
[50-300/10mm Unit(s)]
Clear
[L] Conveyer Length(mm)
[280-2000/5mm Unit(s)]
Clear
Belt Type
- Flat Belt
Clear
Motor Output(W)
6

25
Clear
[TA] Motor Voltage (Single-Phase)(V)
230
Clear
Motor Voltage (No Motor)
- [NV] No Motor
Clear
Motor Type
- [IM] Constant Speed Motor
- [NM] No Motor
- [SCM] Variable Speed Motor
Clear
Gearhead Reduction Ratio
5

7.5

9

12.5

15

18

25

30

36

50

60

75

90

100

120

150

180

[NH] No Gear Heads
Clear
Motor Manufacturer Selection
- [B] Oriental Motor
- [R] No Motor Gearhead
Clear
Belt Specification
- [S] For Sliding - Green
Clear
Belt Specifications
- [H] General Purpose - Translucent
- [J] No Belt
Clear
Type
- GVTWNSE
- GVTWNUE
Clear
Filter by CAD data type
- 2D
- 3D
Clear