Carbide Blade Neck Relief End Mill, 2-Flute / Short Model
Click on this image to zoom in.
Click on this image to zoom in.
- General Steel
- 2 Flutes
- S (Short)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| SEC-TSEM2S6-[3-8/0.1]-[5-14/0.1]-[3-5/0.1] |
| SEC-TSEM2S8-[3-8/0.1]-[5-18/0.1]-[4-7/0.1] |
| SEC-TSEM2S10-[3-8/0.1]-[5-22/0.1]-[5-9/0.1] |
| SEC-TSEM2S12-[3-10/0.1]-[5-26/0.1]-[6-11/0.1] |
| Part Number | Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Flute Width (ℓ1) (mm) | Neck Diameter (d1) (mm) | Neck Length (ℓ2) (mm) | |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 7 Days | 6 | 6 | 45 | 3 ～ 8 | 3 ～ 5 | 5 ～ 14 | ||
| 1 | 7 Days | 8 | 8 | 55 | 3 ～ 8 | 4 ～ 7 | 5 ～ 18 | ||
| 1 | 7 Days | 10 | 10 | 65 | 3 ～ 8 | 5 ～ 9 | 5 ～ 22 | ||
| 1 | 7 Days | 12 | 12 | 75 | 3 ～ 10 | 6 ～ 11 | 5 ～ 26 |
Loading...
Specifications
| Model Number | Flute Width ℓ1 0.1 mm Increment Designation | Neck Length ℓ2 0.1 mm Increment Designation | Neck Diameter d1 0.1 mm Increment Designation | Overall Length L | Shank Diameter d | |
| Flute Diameter D | ||||||
| SEC-TSEM2S (Non-Coated Type) TSC-TSEM2S (TS Coating Type) | 6 | 3.0 ~8.0 | ℓ1+2≤ℓ2≤14 | 3.0 ~5.0 | 45 | 6 |
| 8 | 3.0 ~8.0 | ℓ1+2≤ℓ2≤18 | 4.0 ~7.0 | 55 | 8 | |
| 10 | 3.0 ~8.0 | ℓ1+2≤ℓ2≤22 | 5.0 ~9.0 | 65 | 10 | |
| 12 | 3.0 ~ 10.0 | ℓ1+2≤ℓ2≤26 | 6.0 ~ 11.0 | 75 | 12 |
For Cutting Conditions, Refer to >>Click here.
Basic information
| Work Material | General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 2 | Model | Square |
|---|---|---|---|---|---|
| Coating | Non-Coated | Processing Applications | Flat Surface / Side Surface / Groove | Geometry | With Lead |
| Torsion Angle (θ) | Standard Helix (30 to 40°) | Additional Classification | Manufactured Product | Tolerance of OD(mm) | 0 ~ -0.02 |
| ● Inventory Product □ Manufacturer Product | □ |
Configure
Basic Attributes
-
Outer Diameter (D)(φ)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Flute Width (ℓ1)(mm)
-
Neck Diameter (d1)(mm)
-
Neck Length (ℓ2)(mm)
-
Type
- SEC-TSEM2S
Filter by standard shipping days
-
- All
- 7 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Způsob platby
Platba na účet
Zálohová platba
Výroba na vyžádání
Certifikáty
Copyright © MISUMI Corporation Všechna práva vyhrazena.