GANTER Magnets - Round
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Promotional pricing ends 31/12/2024
Raw magnets / SmCo, NdFeB / GN 55.2
GANTER
Raw magnets GN 55.2 are unshielded disc-shaped magnets.
Owing to their vast range of different magnet materials and sizes, they are suitable for virtually universal use. They are mostly attached by gluing.
When used without air gap, individual raw magnets always have lower adhesive forces than a magnet system in which shielding and magnetic return enormously intensify the force acting at the adhesion surface. Depending on the air gap between magnet and mating component, individual raw magnets - unlike magnet systems - can have substantially higher adhesive forces.
In the event that no suitable retaining magnets / magnet systems are available, raw magnets may be used in combination with appropriate holding constructions to build up highly specific magnet systems.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 1.08 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Retaining magnets with threaded stud
GANTER
Retaining magnets GN 50.3 are a shielded magnetic system.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 2.76 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Retaining magnets, without thread
GANTER
[Specifications]
・Material: Hard ferrite, SmCo, NdFeB- Volume Discount
Starting from∗ ： 2.60 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Retaining magnets, with bore, Stainless Steel
GANTER
Stainless Steel-Retaining magnets GN 50.45 are a shielded magnetic system.
Owing to the lower magnetic conductivity of the stainless steel housing, the adhesive forces are lower than in steel.
To ensure that the magnetic properties (adhesive forces) are not impaired, the fixing screws must be made of non-magnetic material.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 2.94 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Raw magnets / AINiCo / GN 55.3
GANTER
Raw magnets GN 55.3 are unshielded rod-shaped magnets.
Owing to their vast range of different sizes, they are suitable for virtually universal use. They are mostly attached by pressing in or gluing.
When used without air gap, individual raw magnets always have lower adhesive forces than a magnet system in which shielding and magnetic return enormously intensify the force acting at the adhesion surface. Depending on the air gap between magnet and mating component, individual raw magnets - unlike magnet systems - can have substantially higher adhesive forces.
In the event that no suitable retaining magnets / magnet systems are available, raw magnets may be used in combination with appropriate holding constructions to build up highly specific magnet systems.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 1.40 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Retaining magnets with female thread / Hard ferrite, SmCo, NdFeB / M3-M14 / 50.2
GANTER
Retaining magnets GN 50.2 are a shielded magnetic system.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 2.16 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Retaining magnets with bore
GANTER
Retaining magnets GN 50.4 are a shielded magnetic system.
To ensure that the magnetic properties (adhesive forces) are not impaired, the fixing screws must be made of non-magnetic material (magnetic not conductive).- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 2.40 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Retaining magnets with female thread / Hard ferrite, NdFeB / M4-M8 / 50.4
GANTER
Retaining magnets GN 50.4 are a shielded magnetic system.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 3.04 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Retaining magnets with female thread, Steel
GANTER
Retaining magnets GN 50.5 are a shielded magnetic system. For diameter d1 ≥ 50 the adhesive surface is lagged with a plastic cover.
To ensure that the magnetic properties (adhesive forces) are not impaired, the fixing screws must be made of non-magnetic material.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 13.70 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Retaining magnets, smooth finish
GANTER
Retaining magnets GN 52.1 are a shielded magnetic system.
Attachment options include pressing in, shrinking in or gluing in.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 4.30 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Retaining magnets, smooth finish, Brass
GANTER
Retaining magnets GN 54.1 are a shielded magnetic system.
The configuration of magnetic and iron poles is known as sandwich magnet system. These retaining magnets deliver ultimate holding power, also with smaller workpieces.
Attachment options include pressing in or gluing in.
* k1 is the maximum dimension by which the retaining magnet can be shortened without losing its properties.
** Mounting these retaining magnets directly in steel components will create a magnetic shortcircuit which reduces the retaining power by as much as 15%. To avoid this effect, the spacings k2 between brass jacket and steel component should be observed. These spacings should also be maintained if the retaining magnet is shortened.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 4.62 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Pot magnets bore
GANTER
[Specifications]
・Material: AINiCo
・Finish: RT, ZB
・h: 7.5-10.5
・Diameter: 19.1-38.1
Pot magnets GN 58 are combined with a steel housing and insulation of brass / aluminum into a system that shields and strengthens the magnet for optimal transmission of the magnetic flux onto the magnetic surface.
To ensure that the magnetic properties are not impaired negatively, the fixing screws should be made of non-magnetic material, like for example stainless steel, brass or plastic.
For easier handling and to avoid demagnetization, a galvanized iron plate protects the magnetic surface of the magnet during storage and transport.- Volume Discount
Starting from∗ ： 5.32 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Stainless Steel-Retaining magnets, female thread
GANTER
[Specifications]
・Material: HF. Hard ferrite
・Thread: M5
・D3: 8
・h: 7-14
Stainless steel retaining magnets GN 50.25 are combined with the stainless steel housing and the plastic ring into a system that shields and strengthens the magnet for optimal transmission of the magnetic flux onto the magnetic surface.- Volume Discount
Starting from∗ ： 6.08 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Shape |
| Attraction Froce (Range)(N) |
| Attraction Force (Specific)(N) |
| Magnet Type (Material) |
| Outer Diameter(mm) |
| Inner Diameter(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER |
| Product Series | Retaining magnets with female thread / Hard ferrite, SmCo, NdFeB / M3-M14 / 50.2 | Retaining magnets with female thread / Hard ferrite, NdFeB / M4-M8 / 50.4 | |||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
| |||
| Starting from∗ | 1.08 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 2.76 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 2.60 € *Unit price with basic configuration Volume Discount | 2.94 € *Unit price with basic configuration Volume Discount | 1.40 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 2.16 € *Unit price with basic configuration Volume Discount | 2.40 € *Unit price with basic configuration Volume Discount | 3.04 € *Unit price with basic configuration Volume Discount | 13.70 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 4.30 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 4.62 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 5.32 € *Unit price with basic configuration Volume Discount | 6.08 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | Same day | Same day | 7 Days | 4 Days | Same day | 4 Days | 4 Days | 4 Days | Same day | Same day | Same day | 7 Days | 7 Days |
| Shape | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Attraction Froce (Range)(N) | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Attraction Force (Specific)(N) | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Magnet Type (Material) | Neodymium Magnet / Samarium-Cobalt Magnet | Neodymium Magnet / Ferrite Magnet | - | Samarium-Cobalt Magnet / Ferrite Magnet | Alnico Magnet | Neodymium Magnet / Samarium-Cobalt Magnet / Ferrite Magnet | Neodymium Magnet / Ferrite Magnet | Ferrite Magnet | Neodymium Magnet | Neodymium Magnet / Alnico Magnet | Neodymium Magnet / Samarium-Cobalt Magnet | - | - |
| Outer Diameter(mm) | 4 ～ 24 | 10 ～ 63 | - | 20 ～ 63 | 3 ～ 34 | 8 ～ 125 | 16 ～ 80 | 25 ～ 80 | 32 ～ 75 | 4 ～ 63 | 6 ～ 32 | - | - |
| Inner Diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Shape
-
Round -
Ring
-
-
Attraction Froce (Range)(N)
- Up to 10.0
- 10.1 to 20.0
- 20.1 to 30.0
- 30.1 to 40.0
- 40.1 to 50.0
- 50.1 to 60.0
- 60.1 to 70.0
- 70.1 to 80.0
- 80.1 to 90.0
- 90.1 to 100.0
- 100.1 or More
-
Attraction Force (Specific)(N)
-
Magnet Type (Material)
-
Outer Diameter(mm)
- 1
- 1.2
- 1.4
- 1.46
- 1.5
- 1.8
- 2
- 2.2
- 2.3
- 2.5
- 3
- 3 +0/-0.2
- 3.2
- 3.5
- 3.8
- 3.9
- 4
- 4 +0/-0.2
- 4.4
- 5
- 5 +0/-0.2
- 5 ±0.1
- 5.2
- 5.5
- 5.7
- 5.9
- 6
- 6 +0/-0.2
- 6 ±0.1
- 6.35
- 6.5
- 6.6
- 7
- 8
- 8 +0/-0.2
- 8 ±0.1
- 8.2
- 8.5
- 9
- 9.4
- 9.5
- 9.6
- 10
- 10 +0/-0.2
- 10 ±0.1
- 10.5
- 11
- 12
- 12 +0/-0.2
- 12 ±0.1
- 12.35
- 12.5
- 12.6
- 13
- 13.2
- 13.5
- 14
- 14.2
- 15
- 15 +0/-0.2
- 15 ±0.1
- 15.5
- 16
- 17
- 17.2
- 17.5
- 17.9
- 18
- 18 ±0.1
- 19
- 19.2
- 20
- 20.5
- 21
- 21.2
- 22
- 22.5
- 23
- 23.5
- 24
- 24 ±0.1
- 25
- 26
- 28
- 29
- 30
- 31
- 31.2
- 32
- 34
- 34 +0/-0.2
- 35
- 35.5
- 35.6
- 36
- 37
- 38
- 39
- 39.2
- 40
- 42
- 45
- 46
- 47
- 48
- 50
- 55
- 59
- 60
- 63
- 70
- 75
- 76
- 80
- 90
- 100
- 110
- 125
- 134
- 156
-
Inner Diameter(mm)
Narrow search by specifying Brand
-
- MISUMI (8)
- GANTER (13)
- MAGNA (13)
- NIROKU (10)
- ECLIPSE MAGNETICS (8)
- NEOMAG (6)
- NORELEM (4)
- KIPP (3)
- MAGSOL (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Examples how you can use these components Test
Categories related to Magnets - Round
Způsob platby
Platba na účet
Zálohová platba
Výroba na vyžádání
Certifikáty
Copyright © MISUMI Corporation Všechna práva vyhrazena.