KATO MFG Tap Holders（Product Category：Main Body）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
CA Series SKB Type Tapper
KATO MFG
[Features]
· For Processing Machines with High Synchronization Accuracy
· Supports center through coolant
· Ideal for high speed tapping
· Range of Work Expanded with Short BodyStarting from∗ ： 185.82 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
CA Series ECP Type Tapper
KATO MFG
[Features]
· Eliminates concerns about synchronization errors
· Thin pencil type
· Function is limited to tension (shallow screw set prevention)
· In combination with a TCA-S collet, it is the same length as a conventional SA-III type tapper, and so can be replaced without having to change the program.
· Tension prevents chipping, etc. even in difficult-to-machine materialsStarting from∗ ： 344.06 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
RF Series RF Type Tapper
KATO MFG
[Features]
· Radial float tapper.
· Can be tapped directly into the aluminum die-cast punching holes.
· Can also be used as a reamer holder.
· Smooth misalignment absorption allows vertical threading.Starting from∗ ： 583.95 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
SA Series HA-M Type Tapper
KATO MFG
[Features]
· For Synchronization Control Processing Machines
· Supports high speed tapping
· Range of Work Expanded with Short Body
· Unlike the spring collet, tap attachment and detachment can be performed in a single action
· Remeasurement of tool length after tap replacement is unnecessaryStarting from∗ ： 301.11 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
SA Series HA-M-OHC Type Tapper
KATO MFG
[Features]
· HA-M type that supports center through coolant
· Characteristics and specifications conform to the HA-M type
· The flange through oil hole type (-OHF) is available upon order
· Unlike the spring collet, tap attachment and detachment can be performed in a single action
· Remeasurement of tool length after tap replacement is unnecessary
· The standard specification uses the TC-MO with feed pump pressures up to 2 MPa.
· Use the TC-MO-SB to handle feed pump pressures up to 5 MPa.
· Also Supports Mist SpecificationsStarting from∗ ： 307.33 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
SA Series BT-SA-III Type Tapper (Bottle Grip Taper Shank)
KATO MFG
[Features]
· Best-selling "Kato Tapper"
· Sizing type screw depth built-in limiting device
· Tapper that works with all machinery, workpieces, and cutting conditions
· Ideal for machining valuable workpieces such as prototypes, single articles, molds, etc.
· The specifications, such as the strength of the spring and extension/contraction amount, can be changed to match the usage conditions.
· The expansion device absorbs feed errors to realize high thread accuracyStarting from∗ ： 582.22 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
SA Series ST-SA-III Type Tapper (Straight Shank for Milling Chuck)
KATO MFG
[Features]
· Best-selling "Kato Tapper"
· Sizing type screw depth built-in limiting device
· Tapper that works with all machinery, workpieces, and cutting conditions
· Ideal for machining valuable workpieces such as prototypes, single articles, molds, etc.
· The specifications, such as the strength of the spring and extension/contraction amount, can be changed to match the usage conditions.
· The expansion device absorbs feed errors to realize high thread accuracyStarting from∗ ： 453.39 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
SA Series BT-SA-III-OHC Type Tapper
KATO MFG
[Features]
· SA-III type that supports center through coolant
· Uses the TC-MO to handle feed pump pressures of up to 2 MPa.
· Mist specification can also be manufactured
· Other features/specifications are based on SA-III types
· Right-hand threads onlyStarting from∗ ： 972.18 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
SA Series ST-SA-VI Type Tapper (Straight Shank for Milling Chuck)
KATO MFG
[Features]
· Short body type that can be used in various machines
· Expansion Device to Absorb Feed Errors
· Short Type Ideal for Narrow Work SpacesStarting from∗ ： 488.85 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
SA Series BT-SA-IIS Type Tapper (Bottle Grip Taper Shank)
KATO MFG
[Features]
· Machining Tapper with the World's Shortest Design
· Designed with an ultra-short body, it is ideal for narrow work spaces such as five-surface machine tools, turning centers, etc.
· Expansion Device to Absorb Feed ErrorsStarting from∗ ： 701.65 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Drill Tapper Set
KATO MFG
[Features]
· Drills and Taps for Standing and Radial Drilling Machines
· Quick Change set
· The drill and tap can be replaced in a single touch on the same coreStarting from∗ ： 1,596.05 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
ST Shank SA-VI Type
KATO MFG
[Features]
· Short body type that can be used in most machines
· Expansion device for absorbing feed errors
· Short type ideal for use in tight work spacesStarting from∗ ： 526.32 € Min. Shipping Days ： 11 Days *Unit price with basic configuration
-
TC Type Collet
KATO MFG
[Features]
· Type with built-in automatic safety device
· Appropriate torque is set for each tap size
· The automatic safety device adopts a ball clutch for smoother operation, ensuring both safety and durability
· Pipe threads for the TC2035 or above are side lock typesStarting from∗ ： 260.56 € Min. Shipping Days ： 11 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Product Category |
| Applicable Manufacturing Machinery (main unit) |
| Spindle types |
| HSK type |
| Tool Type |
| Retainable blade diameter(mm) |
| Holder Length L(mm) |
| Coolant System |
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KATO MFG | KATO MFG | KATO MFG | KATO MFG | KATO MFG | KATO MFG | KATO MFG | KATO MFG | KATO MFG | KATO MFG | KATO MFG | KATO MFG | KATO MFG |
| Product Series | SA Series ST-SA-III Type Tapper (Straight Shank for Milling Chuck) | SA Series ST-SA-VI Type Tapper (Straight Shank for Milling Chuck) | |||||||||||
| Starting from∗ | 185.82 € *Unit price with basic configuration | 344.06 € *Unit price with basic configuration | 583.95 € *Unit price with basic configuration | 301.11 € *Unit price with basic configuration | 307.33 € *Unit price with basic configuration | 582.22 € *Unit price with basic configuration | 453.39 € *Unit price with basic configuration | 972.18 € *Unit price with basic configuration | 488.85 € *Unit price with basic configuration | 701.65 € *Unit price with basic configuration | 1,596.05 € *Unit price with basic configuration | 526.32 € *Unit price with basic configuration | 260.56 € *Unit price with basic configuration |
| Min. Shipping Days ： | 10 Days | 10 Days | 10 Days | 8 Days | 8 Days | 8 Days | 8 Days | 10 Days | 10 Days | 10 Days | 10 Days | 11 Days | 11 Days |
| Product Category | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body |
| Applicable Manufacturing Machinery (main unit) | Machining Centers | Machining Centers | Machining Centers | Machining Centers | Machining Centers | Machining Centers | Generic Machine | Machining Centers | Generic Machine | Machining Centers | Generic Machine | - | - |
| Spindle types | BT30 / BT40 / BT50 | BT40 / BT50 | BT30 | BT30 / BT40 / BT50 | BT30 / BT40 / BT50 | BT30 / BT40 / BT50 | - | - | - | BT50 | - | - | - |
| HSK type | - | - | - | - | - | - | - | - | - | - | - | 25 | - |
| Tool Type | - | - | - | - | - | - | - | - | - | - | - | Tap | Tap |
| Retainable blade diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | M3～M16 | M36 |
| Holder Length L(mm) | 98 ～ 145 | 150 ～ 195 | 75 ～ 112 | 90 ～ 135 | 105 ～ 210 | 120 ～ 375 | 127 ～ 174 | 195 ～ 275 | 93 ～ 140 | 84 ～ 123 | - | 93 | - |
| Coolant System | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Product Category
- Main Body
- Attachments/Accessories
- Measuring equipment
-
Applicable Manufacturing Machinery (main unit)
- Machining Centers
- Generic Machine
-
Spindle types
- BT30
- BT40
- BT50
- HSK-A
-
HSK type
-
Tool Type
- Drill
- Reamer
- Tap
-
Retainable blade diameter(mm)
-
Holder Length L(mm)
- 15.5
- 16
- 16.5
- 19.5
- 24.5
- 26.5
- 29
- 29.5
- 30
- 34
- 35
- 66
- 70
- 75
- 82
- 84
- 84.5
- 85
- 90
- 90.5
- 93
- 95/135/165
- 97
- 97.5
- 98
- 100
- 100/140/170
- 105
- 109
- 110
- 112
- 113
- 115
- 120
- 120/160/190
- 123
- 125
- 125/175/205
- 127
- 129.5
- 130
- 131.5
- 132
- 135
- 140
- 142
- 143
- 145
- 148
- 149.5
- 150
- 155
- 156
- 160
- 163
- 165
- 170
- 174.0
- 175
- 176.5
- 181
- 185
- 187
- 190
- 192
- 195
- 200
- 210
- 218
- 220
- 225
- 226.0
- 240
- 275
- 285
- 375
-
Coolant System
- Center Through (Blade Through)
Narrow search by specifying Brand
-
- KATO MFG (13)
- BIG KAISER (5)
- NIKKEN KOSAKUSHO (5)
- YUKIWA SEIKO (5)
- NT TOOL (0)
- OSG (0)
- MITUTOYO (0)
- SANDVIK (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Tap Holders
Způsob platby
Platba na účet
Zálohová platba
Výroba na vyžádání
Certifikáty
Copyright © MISUMI Corporation Všechna práva vyhrazena.