DAIDO METAL Plain Bearing (Bushes)
Narrow search by specifying Type
-
-
-
Flanged -
Housing Unit Type
?* Information on days to ship and prices
-
Plain bearing bushes / slotted / DBB01
DAIDO METAL
Oil-retaining bearing (bushing type) with self-lubricating characteristics.
[Features]
· Can be used without oil.
· High-load, high-speed capabilities.
· Stable shape and dimensions and thin-wall construction for compact equipment design.
· Excellent wear resistance in places where oil film formation is difficult due to reciprocating and oscillating motion, frequent start and stop, etc.
· Wide selection of standard parts such as wrapped bushes, thrust washers, slide plates, etc. available.
· Compatible with DDK05 dry bearings and DBX01 bearings.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 0.98 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes / plastic / DDK05
DAIDO METAL
Compound bearing (bushing type ) with low friction characteristics and that optimizes metal properties such as strength and dimensional stability.
This environmentally friendly, lead- free, self-lubricating bearing requires no additional lubricant and does not use any lead at all.
Daidyne DDK05 is a compound bearing that combines a low-friction polytetrafluoroethylene (PTFE) bearing surface with the strength and dimensional stability of a metal backing.
[Features]
· The bearing surface has such a low coefficient of static and dynamic friction so that the surface runs smoothly without lubrication.
· "Stick Slip" doesn't happen.
· Also safe to use in oil.
· Can be used within a temperature range of -200°C to +280°C.
· Adaptable to operations under high-load, impact load, intermittent operation and reciprocating motion.
· Free from electrostatic induction (when installed, each bearing has an electrical resistance of 1 to 10 Ω per 1cm2).
· Bearing surface has superior chemical resistance and is not affected by solvents such as petroleum and alcohol.
· Will not damage the surface of the engaging component.
· Extended surface life.
· Bearing is lightweight and thin (3 mm at its thickest), so it doesn't take up much space and has a compact design.
· Minimizes operating noise.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 0.95 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes with flange / DBS02
DAIDO METAL
Oil-retaining bearing (flanged bushing) with self-lubricating characteristics.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 0.39 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes / copper alloy / solid lubricant / HA
DAIDO METAL
Oilless bearing for high load (bushing type).- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 9.01 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes / composite material / DBS02
DAIDO METAL
Oil-retaining bearing (bushing type) with self-lubricating characteristics.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 0.42 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes with flange / slotted / DDK05
DAIDO METAL
Compound bearing (flanged bushing type ) with low friction characteristics and that optimizes metal properties such as strength and dimensional stability.
[Features]
· The bearing surface has such a low coefficient of static and dynamic friction so that the surface runs smoothly without lubrication.
· So-called "StickSlip" does not occur.
· Also safe to use in oil.
· Can be used within a temperature range of -200°C to +280°C.
· Adaptable to operations under high-load, impact load, intermittent operation and reciprocating motion.
· Free from electrostatic induction (when installed, each bearing has an electrical resistance of 1 to 10 Ω per 1cm2).
· Bearing surface has superior chemical resistance. It is also not affected by solvents, such as petroleum and alcohol.
· Will not damage the surface of the engaging component.
· Extended surface life.
· Bearing is lightweight and thin (3 mm at its thickest), so it does not require much space. In other words, the design is more compact.
· Minimizes operating noise.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 1.71 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes / bronze / GB
DAIDO METAL
Metal-based oil free bearing in which a solid lubricant (graphite) is finely and uniformly dispersed into a bronze base metal.
D type is a general use grade of Thermalloy, which can be used under a wide range of conditions.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 10.97 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Plain bearing bushes / bronze / DM
DAIDO METAL
Metal-based oil free bearing (finished bushings) in which a solid lubricant is finely and uniformly dispersed into a bronze base metal.
[Features]
· Bronze alloys are offered as a standard material for Thermalloy type D and also standard parts such as finished bushings. (Lead-bronze products are only made to order.)- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 17.27 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes with flange / SAF
DAIDO METAL
Oilless bearing for high load (flanged bushing type).
[Features]
· Copper based oilless bearing for heavy load applications into which solid lubricant plugs are embedded.
· Choose base metal and plug according to the application and working conditions.
· Maintenance-free, no need to supply oil.
· Excellent wear resistance properties.
· Excellent wear resistance properties are exhibited in applications where oil film formation is difficult such as reciprocating, intermittent, and oscillating motions under conditions of high load and low speed.
· Low friction coefficient.
· Can be used under a wide range of temperatures from low to high.
· Free design of shape and size is possible.
· Superior corrosion and chemical resistance.
· Can be used in river or in sea water, in special liquids where chemical resistance of the metal base and solid lubricant is needed, and in gas where oil supply is difficult.
· Superior impact resistance.- Volume Discount
- Stock
- 2D / 3D CAD data available
Starting from∗ ： 10.73 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plain bearing bushes / slotted / DBX
DAIDO METAL
Pre-lubricated bearing. Be sure to fill with lubricant when installing.
[Features]
· Quiet operation free of squeaking or knocking.
· Low friction characteristics prevents damage to the shaft (mating surface).
· The bearing surface remains virtually wear-free with minimum amount of lubricant (grease or oil).
· The frictional force at startup is extremely low.
· This enables smooth rotation at startup and at low speed under high load conditions.
· Superior non-seizure properties.
· Shaft misalignment tolerance is excellent.
· Can withstand impact loads.
· Excellent load-carrying performance even under oscillating and fretting conditions- Volume Discount
- Stock
- 2D / 3D CAD data available
Starting from∗ ： 1.53 € Min. Shipping Days ： Same day *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Specifications |
| Type |
| Metallic |
| Resin Group |
| Multi-Layer |
| Environment |
| I.D. d(mm) |
| O.D. D(mm) |
| Overall Length L(mm) |
| Maximum Allowable PV Value Range(N/mm2•m/s) |
| Maximum Allowable PV Value(N/mm²·m/s) |
| Max. Allowable Surface Pressure P(N/mm2) |
| Max. Allowable Velocity V(m/s) |
| Housing Shape |
| Housing Material |
| Length Type |
| Mounting Shaft Fits |
| Mounting Hole Fits |
| Thickness T(mm) |
| Lubrication Condition |
|
|
|
|
|
|
|
|
|
| |
| Brand | DAIDO METAL | DAIDO METAL | DAIDO METAL | DAIDO METAL | DAIDO METAL | DAIDO METAL | DAIDO METAL | DAIDO METAL | DAIDO METAL | DAIDO METAL |
| Product Series | ||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
| Starting from∗ | 0.98 € *Unit price with basic configuration Volume Discount | 0.95 € *Unit price with basic configuration Volume Discount | 0.39 € *Unit price with basic configuration Volume Discount | 9.01 € *Unit price with basic configuration Volume Discount | 0.42 € *Unit price with basic configuration Volume Discount | 1.71 € *Unit price with basic configuration Volume Discount | 10.97 € *Unit price with basic configuration Volume Discount | 17.27 € *Unit price with basic configuration Volume Discount | 10.73 € *Unit price with basic configuration Volume Discount | 1.53 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | Same day | Same day | Same day | Same day | Same day | Same day | 5 Days | Same day | Same day | Same day |
| Specifications |
|
| ||||||||
| Type | Straight Type | Straight Type | Shouldered Type | Straight Type | Straight Type | Shouldered Type | Straight Type | Straight Type | Shouldered Type | Straight Type |
| Metallic | - | - | - | Brass | - | - | Bronze | Bronze | Brass | - |
| Resin Group | POM (Polyacetal) | - | POM (Polyacetal) | - | POM (Polyacetal) | - | - | - | - | POM (Polyacetal) |
| Multi-Layer | - | Steel, Sintered Bronze, Polytetrafluoroethylene) | - | - | - | Steel, Sintered Bronze, Polytetrafluoroethylene) | - | - | - | - |
| Environment | Vibration Resistant | Standard / In Oil | Standard | Standard / Heat Resistant / Foreign Object Resistant | Standard | Standard / In Oil | Foreign Object Resistant / In Water | Foreign Object Resistant / In Water | Standard / Heat Resistant / Foreign Object Resistant | Standard / Foreign Object Resistant / Vibration Resistant |
| I.D. d(mm) | 5 ～ 100 | 3 ～ 160 | 3 ～ 35 | 6 ～ 160 | 3 ～ 30 | 3 ～ 60 | 6 ～ 50 | 10 ～ 100 | 6 ～ 120 | 10 ～ 85 |
| O.D. D(mm) | 7 ～ 105 | 5 ～ 165 | 5 ～ 39 | 10 ～ 180 | 5 ～ 34 | 4.6 ～ 65 | 10 ～ 62 | 16 ～ 120 | 10 ～ 140 | 13 ～ 90 |
| Overall Length L(mm) | 4 ～ 90 | 3 ～ 100 | 3 ～ 40 | 8 ～ 150 | 3 ～ 40 | 3 ～ 60 | 6 ～ 50 | 10 ～ 60 | 10 ～ 80 | 10 ～ 80 |
| Maximum Allowable PV Value Range(N/mm2•m/s) | 2.1 to 5.0 | 2.1 to 5.0 | 2.1 to 5.0 | 1.1 to 2.0 | 2.1 to 5.0 | 1.1 to 2.0 | - | 1.1 to 2.0 | 1.1 to 2.0 | 2.1 to 5.0 |
| Maximum Allowable PV Value(N/mm²·m/s) | 2.62 | 3.6 | 2.45 | 1.65 | 2.45 | 1.72 | - | 1.65 | 1.65 | - |
| Max. Allowable Surface Pressure P(N/mm2) | 68.6 | 49 | 17.5 | 29 | 17.5 | 137 | - | 10 | 29 | - |
| Max. Allowable Velocity V(m/s) | 2.5 | 0.65 | 0.85 | 0.5 | 0.85 | 1 | - | 0.85 | 0.5 | - |
| Housing Shape | - | - | - | - | - | - | - | - | - | - |
| Housing Material | - | - | - | - | - | - | - | - | - | - |
| Length Type | - | - | - | - | - | - | - | - | - | - |
| Mounting Shaft Fits | - | - | - | - | - | - | - | - | - | - |
| Mounting Hole Fits | H7 | H7 | H7 | H7 | H7 | H7 | - | H7 | H7 | H7 |
| Thickness T(mm) | 1 ～ 2.5 | 1 ～ 2.5 | 1 ～ 2 | - | 1 ～ 2 | 0.8 ～ 2.5 | - | - | - | 1.5 ～ 2.5 |
| Lubrication Condition | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated | Unlubricated |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Metallic
-
Resin Group
- POM (Polyacetal)
- PTFE (Polytetrafluoroethylene)
- High Performance Polymer Group
- Polyphenylenesulfide
-
Multi-Layer
- Steel, Sintered Bronze, Polytetrafluoroethylene)
- Steel, Sintered Bronze, Polyacetar
- Steel, Copper Type Sintered Alloy
- Metal Mesh, Polytetrafluoroethylene
- Aluminum, Fluororesin
- Polyacetal
-
Environment
- Standard
- Heat Resistant
- Foreign Object Resistant
- Vibration Resistant
- In Oil
- In Water
- In Seawater
- In Chemical
- Food
-
I.D. d(mm)
-
O.D. D(mm)
- 3
- 3.5
- 4
- 4.5
- 4.6
- 5
- 5.5
- 5.6
- 6
- 7
- 8
- 9
- 10
- 10.1
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 50
- 52
- 53
- 55
- 56
- 57
- 60
- 62
- 65
- 67
- 70
- 74
- 75
- 77
- 80
- 85
- 90
- 95
- 96
- 100
- 105
- 110
- 115
- 117
- 118
- 120
- 125
- 130
- 135
- 140
- 145
- 150
- 155
- 156
- 160
- 165
- 170
- 180
- 185
- 190
- 205
- 255
- 305
-
Overall Length L(mm)
- 1
- 1.5
- 2
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 3
- 3.5
- 3.8
- 3.9
- 4
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 5
- 5.5
- 5.7
- 5.8
- 5.9
- 6
- 6.5
- 6.8
- 7
- 7.25
- 7.5
- 7.7
- 7.8
- 8
- 8.5
- 9
- 9.5
- 10
- 10.5
- 11
- 11.5
- 11.8
- 12
- 12.5
- 13
- 13.5
- 13.8
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 20
- 21
- 21.5
- 22
- 23
- 23.5
- 24
- 25
- 25.5
- 26
- 27
- 28
- 29
- 30
- 31.5
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 38.5
- 39
- 40
- 42
- 42.5
- 45
- 46
- 47
- 48
- 50
- 51
- 52
- 52.5
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 62
- 63
- 64
- 65
- 67
- 67.5
- 68
- 69
- 70
- 73
- 74
- 75
- 76
- 77
- 78
- 80
- 81
- 82
- 85
- 86
- 90
- 95
- 97
- 100
- 103
- 108
- 110
- 112
- 115
- 120
- 125
- 128
- 130
- 140
- 141
- 150
- 158
- 170
- 188
- 500
-
Maximum Allowable PV Value Range(N/mm2•m/s)
-
Maximum Allowable PV Value(N/mm²·m/s)
-
Max. Allowable Surface Pressure P(N/mm2)
-
Max. Allowable Velocity V(m/s)
-
Housing Shape
-
Housing Material
-
Length Type
-
Mounting Shaft Fits
-
Mounting Hole Fits
-
Thickness T(mm)
-
Lubrication Condition
Narrow search by specifying Brand
-
- MISUMI (40)
- OILES (40)
- PERMAGLIDE (16)
- IGUS (12)
- DAIDO METAL (10)
- INA (4)
- NTN (4)
- ZOB (4)
- DOCERAM (1)
- SKF (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Narrow search by specifying lead time
-
- All
- Same day
- 2 Days or Less
- 3 Days or Less
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
Categories related to Plain Bearing (Bushes)
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.