Type Code Seach | *NOT READY*: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

DAIWARASHI Adjuster

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 1 Day or Less 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less

?* Information on days to ship and prices

Adjuster for Heavy Weights (Wide Receiver Type) D-C III /D-C III/S / D-C III-W

DAIWARASHI

A wide base type adjuster for heavy weights that is stable and that can distribute the load to the floor. Note: Please be advised that the model number in VONA has been changed from "D-C III" to "D-C3."

[Features]
· The receiver of the stainless steel D-C III is a forged item.
· D-C III S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.

Volume Discount

2D CAD data available

Starting from^∗ ：	13.99 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Standard Receiver Type Adjuster D-A / D-B

DAIWARASHI

The most general standard type adjuster

[Features]
· The screw shaft rotates and tilts somewhat.
· A standard type that can be used as the adjustment bolt for any machinery.
· The affordable standard receiver type is recommended when using in large numbers, such as for the legs of a conveyor.
· D-A supports screw diameters M16 and M20, and D-B supports screw diameter M12.

Volume Discount

2D CAD data available

Starting from^∗ ：	3.99 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Adjuster with Bottom Part Rubber for Light Vibration-Proofing D-A III / D-A III FR / D-A III SI / D-B III / D-B III FR / D-B III SI

DAIWARASHI

An adjuster for light vibration-proofing equipped with rubber on the back side of the adjuster base. Note: Please be advised that the model number in VONA has been changed from "D-A III" to "D-A3."

[Features]
· Since the rubber part comes in contact with the floor, floor damage is prevented.
· A light vibration-proof type adjustment bolt.
· However, since the rubber hardness is 80°, repulsion is higher than low elasticity rubber and does not demonstrate much of a vibration-proofing effect. For this reason, please compare with other vibration-proof types such as the D-G series when using.
· Can easily be mounted using a screwdriver since a Phillips head slot has been provided on the bottom of the bolt.
· A nylon washer is used between the receiver and bolt, and rotation is smooth.
· The FR type uses non-migratory rubber so traces of rubber do not remain when moving the machinery.
· The SI type is white and is characterized by hardly leaving traces of rubber.
· Suitable for office equipment, etc.

Volume Discount

2D CAD data available

Starting from^∗ ：	6.01 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Adjuster for Heavy Weights (Long Screw Type) D-C-L / D-C-L/S

DAIWARASHI

A long screw adjuster with a wide adjustment range

[Features]
· Although the dimensions in the table are in increments of 50 mm, dimensions can be cut as desired upon request.
A limited quantity of 500 mm total length products are available for M16 and M20.
· D-C-LS has a luxurious feel since the surface of the receiver is grind-processed with a lathe.

Volume Discount

2D CAD data available

Starting from^∗ ：	16.14 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Adjuster for Anchor Fixing (Thrust Bearing Equipped) WD-E II

DAIWARASHI

An adjuster for anchor fixing that features a thrust bearing capable of smooth leveling even when a load is applied. Note: Please be advised that the model number in VONA has been changed from "WD-E II" to "WD-E2."

Volume Discount

2D CAD data available

Starting from^∗ ：	9.35 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Adjuster for Slopes, for Anchor Fixing D-U-E II

DAIWARASHI

An anchor fixing type adjuster for slopes in which the screw shaft part tilts even more. Note: Please be advised that the model number in VONA has been changed from "D-U-E II" to "D-U-E2."

[Features]
· The receiver part has a larger hole than the D-A type in order to enable it to receive the spherical structure of the upper part.
· The spherical structure is divided into a sphere and a receiver.
· The receiver has undergone spherical processing to enable the sphere to moves smoothly.
· M12/M16/M20 bolts can be used.
· The angle 35° is when using an M12 bolt, and when using M16/M20, since the hexagonal part contacts the spherical portion, it is limited to about 15°

Volume Discount

2D CAD data available

Starting from^∗ ：	13.08 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Adjuster for Heavy Weights D-C / D-C / S

DAIWARASHI

A standard type adjuster for heavy loads

[Features]
· The receiver is a forged item.
· Since it is a mold release surface that has undergone hot forging, unevenness does not stand out, unlike mold casting.
· D-C-S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.
· Since the receiver is forged, it features a load resistance of 10 tons or more. However, since the screw is buckled first, load resistance depends on the screw diameter.

Volume Discount

2D CAD data available

Starting from^∗ ：	6.98 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Adjuster for Heavy Weights with Rubber D-C-R

DAIWARASHI

A rubber equipped type adjuster for medium loads

[Features]
· Receiver features a chloroprene rubber coating.

Volume Discount

2D CAD data available

Starting from^∗ ：	9.19 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Adjuster with Rubber for Heavy Weights (Wide Receiver Type) D-C III-R

DAIWARASHI

A wide base type adjuster for medium loads with rubber. Note: Please be advised that the model number in VONA has been changed from "D-C III" to "D-C3."

[Features]
· The receiver features a chloroprene rubber coating and the rear side of the rubber has undergone groove processing to make it resistant to slipping.
· Has a larger outer diameter than D-C-R and feels more stable and heavy.

Volume Discount

2D CAD data available

Starting from^∗ ：	23.14 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Standard Receiver Adjuster, Space Saving Type D-B50 / D-A60 / D-A65

DAIWARASHI

A standard type adjuster in which the adjuster base is compact

[Features]
· An adjuster whose pedestal part is a compact type.
· The screw rotates and tilts somewhat.
· Since the receiver diameter is designed to be smaller than D-A/D-B, it is useful for saving space.

Volume Discount

2D CAD data available

Starting from^∗ ：	4.54 €
Min. Shipping Days ：	15 Days

*Unit price with basic configuration

Adjuster for Walls D-D I

DAIWARASHI

A base cut type adjuster that does not protrude from the upper part and that prevents interference with other parts. Note: Please be advised that the model number in VONA has been changed from "D-D I" to "D-D1."

[Features]
· A special adjuster for walls.
· Please use together with D-D II.
· Please use accessories such as hex nuts, etc.
· The portion that makes contact with the wall is folded.
· As a result, the structure features a load resistance that is dramatically higher than products from other manufacturers in which the receiver is cut.
· In terms of its relation to the wall surface, the bolt hole has undergone special machining different from that of normal catch plates.
· Please refer to the drawings for use.

Volume Discount

2D CAD data available

Starting from^∗ ：	4.73 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Adjuster for Anchor Fixing D-E II /D-E II-ST

DAIWARASHI

A standard item adjuster bolt for anchor fixing. Note: Please be advised that the model number in VONA has been changed from "D-E II" to "D-E2."

[Features]
· Similar to D-A, it is structured so that fixing of the receiver and bolt is performed by placing the bolt protrusion into the receiver and pressing a nut into it.
· Can easily be fixed using an anchor bolt.
· Please use an anchor bolt.
· Please use a 12 mm anchor bolt.
· Bolts shorter than 12 × 70 are not recommended for complete fixing due to safety concerns.
· Note: The screw rotates and tilts somewhat.

Volume Discount

2D CAD data available

Starting from^∗ ：	7.12 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Adjuster for Anchor Fixing with Reinforced Rib Receiver D-E V

DAIWARASHI

[Features]
· It has been pointed out that the receiver of D-E II is easily bent since its thickness is zero. In response to this, the product has been modified to have about twice the strength of the conventional product, not by changing the plate thickness, but by increasing its hardness.
· A steel plate reinforced type adjuster for which the base for anchor fixing includes ribs.
· Please be advised that the model number in VONA has been changed from "D-E V" to "D-E5."

Volume Discount

2D CAD data available

Starting from^∗ ：	10.03 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Adjuster for Anchor Fixing (Large Pedestal Type) D-E-W

DAIWARASHI

A medium load type adjuster for anchor fixing in which the base is wide and stable

[Features]
· By increasing the size and thickness of the pedestal part, the stability after installation and the resistance horizontal shaking of the anchor fixing part have been improved.
· Note: The screw shaft tilts somewhat

Volume Discount

2D CAD data available

Starting from^∗ ：	19.79 €
Min. Shipping Days ：	15 Days

*Unit price with basic configuration

Adjuster for Anchor Fixing, Screw Part Non-Shake D-J-E II

DAIWARASHI

An adjuster for anchor fixing in which the horizontal shaking of the screw shaft part is completely locked. Note: Please be advised that the model number in VONA has been changed from "D-J-E II" to "D-J-E2."

[Features]
· The structure is such that some space exists between the receiver and bolt.
· This is the result of our efforts to enable bolts to move smoothly even if the floor surface is somewhat tilted.
· It has been pointed out in the past that this may cause bolt looseness to occur when the upper portion of a conveyor vibrates, possibly resulting in significant machinery movement caused by shaking when the conveyor stops.
· It is for this reason that we came up with the D-J type, which is suitable for use when the top portion of machinery such as a conveyor vibrates and moves slightly.
· Even when a running machine is stopped, the bolts will not move and falling over will not occur.

Volume Discount

2D CAD data available

Starting from^∗ ：	8.50 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Adjuster, Screw Part Non-Shake, Standard Receiver Type D-J-A

DAIWARASHI

A standard receiver type adjuster in which the horizontal shaking of the screw shaft part is completely locked.

[Features]
· The structure is such that some space exists between the receiver and bolt.
· This is the result of our efforts to enable bolts to move smoothly even if the floor surface is somewhat tilted.
· It has been pointed out in the past that this may cause bolt looseness to occur when the upper portion of a conveyor vibrates, possibly resulting in significant machinery movement caused by shaking when the conveyor stops.
· It is for this reason that we came up with the D-J type, which is suitable for use when the top portion of machinery such as a conveyor vibrates and moves slightly.
· Even when a running machine is stopped, the bolts will not move and falling over will not occur.

Volume Discount

2D CAD data available

Starting from^∗ ：	14.95 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Adjuster for Slopes D-U-A

DAIWARASHI

A standard type adjuster for slopes in which the screw shaft part tilts even more.

[Features]
The receiver part has a larger hole· than the D-A type in order to enable it to receive the spherical structure of the upper part.
· The spherical structure is divided into a sphere and a receiver.
· The receiver has undergone spherical processing to enable the sphere to moves smoothly.
· When M12/M16/M20 bolts are used, in the case of M16/M20, it is limited to about 15° since the hexagonal part comes in contact with the spherical portion.

Volume Discount

2D CAD data available

Starting from^∗ ：	16.98 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Adjuster with Bottom Part Rubber for Light Vibration-Proofing (Thrust Bearing Equipped) WD-A III /WD-B III

DAIWARASHI

An adjuster for light vibration-proofing with a thrust bearing that enables smooth leveling. Note: Please be advised that the model number in VONA has been changed from "WD-A III" to "WD-A3."

[Features]
· Since the rubber part comes in contact with the floor, floor damage is prevented.
· A light vibration-proof type adjustment bolt.
· However, since the rubber hardness is 80°, repulsion is higher than low elasticity rubber and does not demonstrate much of a vibration-proofing effect. For this reason, please compare with other vibration-proof types such as the D-G series when using.
· Can easily be mounted using a screwdriver since a Phillips head slot has been provided on the bolt bottom.
· A nylon washer is used between the receiver and bolt. and rotation is smooth.
· Suitable for office equipment, etc.

Volume Discount

2D CAD data available

Starting from^∗ ：	9.03 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Adjuster, Rubber Receiver Type D-G / D-G II

DAIWARASHI

An adjuster with a rubber-made base that is also optimal for slip prevention. Note: Please be advised that the model number in VONA has been changed from "D-G II" to "D-G2."

[Features]
· A rubber cover is used for the entire receiver, and an iron core is included inside.

Volume Discount

2D CAD data available

Starting from^∗ ：	15.24 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Adjuster with Rubber for Heavy Weights (Bearing Equipped) D-H-R

DAIWARASHI

An adjuster equipped with rubber for medium loads featuring a built-in thrust bearing.

[Features]
· Since the receiver features a chloroprene rubber coating, there is no need to worry about it falling off, enabling it to be used with confidence.
· Groove processing is applied to the rear surface of the rubber to make it non-slippery.
· Effectively protects floors.

Volume Discount

2D CAD data available

Starting from^∗ ：	68.05 €
Min. Shipping Days ：	15 Days

*Unit price with basic configuration

Adjuster for Heavy Weights (Bearing Equipped) D-H

DAIWARASHI

An adjuster for heavy weights with a built-in thrust bearing

[Features]
· Suitable for the adjustment of heavy machinery.
· Stability is outstanding since a large diameter bolt is used.
· Smooth adjustments can be made even for non-heavy machinery.

Volume Discount

2D CAD data available

Starting from^∗ ：	43.81 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Adjuster with Rubber for Heavy Weights (Thrust Bearing Equipped) WD-C-R

DAIWARASHI

A rubber type adjuster for medium loads with a thrust bearing that enables smooth leveling

[Features]
· Receiver features a chloroprene rubber coating.

Volume Discount

2D CAD data available

Starting from^∗ ：	49.08 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Standard Receiver Adjuster with Plastic D-A II /D-B II

DAIWARASHI

A standard type adjuster with plastic that does not damage the floor. Note: Please be advised that the model number in VONA has been changed from "D-A II" to "D-A2."

[Features]
· Does not stain or damage floors since a special plastic is molded into the receiver.
· The plastic part has elasticity, feels good to touch, and features excellent aging resistance and temperature resistance.
· Suitable for any machinery or office equipment since the external appearance also features a beautiful finish.

Volume Discount

2D CAD data available

Starting from^∗ ：	6.97 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Standard Receiver Adjuster, Small Diameter Type D-F / D-F-C

DAIWARASHI

An adjuster whose screw and base have small diameters

[Features]
· Similar to the D-A and D-B types, it is structured so that a nut is pressed into the bolt protrusion inside the receiver, eliminating worries regarding the receiver falling off.
· Manufactured to enable some play between the screw part and receiver, enabling its use on surfaces with a slight slope.
· A light load type with a receiver diameter that is also small.
· Thanks to the plastic coating on the outer circumference of the receiver, floors are not stained or damaged.

Volume Discount

2D CAD data available

Starting from^∗ ：	2.94 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days ：
Type
Adjusting Bolt Shape Type
Swivel Angle θ(deg)
Mounting Shape Type
Height Adjusting Handle
Thread Material
Thread Surface Treatment
Body Material
Main Body Surface Treatment
Bottom Rubber Material
Thread Length L1(mm)
Main Body Height h(mm)
Thread Nominal M(mm)
Properties
Swivel Mechanism


Brand	DAIWARASHI	DAIWARASHI	DAIWARASHI	DAIWARASHI	DAIWARASHI	DAIWARASHI	DAIWARASHI	DAIWARASHI	DAIWARASHI	DAIWARASHI	DAIWARASHI	DAIWARASHI	DAIWARASHI	DAIWARASHI	DAIWARASHI	DAIWARASHI	DAIWARASHI	DAIWARASHI	DAIWARASHI	DAIWARASHI	DAIWARASHI	DAIWARASHI	DAIWARASHI	DAIWARASHI
Product Series	Adjuster for Heavy Weights (Wide Receiver Type) D-C III /D-C III/S / D-C III-W	Standard Receiver Type Adjuster D-A / D-B	Adjuster with Bottom Part Rubber for Light Vibration-Proofing D-A III / D-A III FR / D-A III SI / D-B III / D-B III FR / D-B III SI	Adjuster for Heavy Weights (Long Screw Type) D-C-L / D-C-L/S	Adjuster for Anchor Fixing (Thrust Bearing Equipped) WD-E II	Adjuster for Slopes, for Anchor Fixing D-U-E II	Adjuster for Heavy Weights D-C / D-C / S	Adjuster for Heavy Weights with Rubber D-C-R	Adjuster with Rubber for Heavy Weights (Wide Receiver Type) D-C III-R	Standard Receiver Adjuster, Space Saving Type D-B50 / D-A60 / D-A65	Adjuster for Walls D-D I	Adjuster for Anchor Fixing D-E II /D-E II-ST	Adjuster for Anchor Fixing with Reinforced Rib Receiver D-E V	Adjuster for Anchor Fixing (Large Pedestal Type) D-E-W	Adjuster for Anchor Fixing, Screw Part Non-Shake D-J-E II	Adjuster, Screw Part Non-Shake, Standard Receiver Type D-J-A	Adjuster for Slopes D-U-A	Adjuster with Bottom Part Rubber for Light Vibration-Proofing (Thrust Bearing Equipped) WD-A III /WD-B III	Adjuster, Rubber Receiver Type D-G / D-G II	Adjuster with Rubber for Heavy Weights (Bearing Equipped) D-H-R	Adjuster for Heavy Weights (Bearing Equipped) D-H	Adjuster with Rubber for Heavy Weights (Thrust Bearing Equipped) WD-C-R	Standard Receiver Adjuster with Plastic D-A II /D-B II	Standard Receiver Adjuster, Small Diameter Type D-F / D-F-C
CAD	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D
Starting from^∗	13.99 € *Unit price with basic configuration Volume Discount	3.99 € *Unit price with basic configuration Volume Discount	6.01 € *Unit price with basic configuration Volume Discount	16.14 € *Unit price with basic configuration Volume Discount	9.35 € *Unit price with basic configuration Volume Discount	13.08 € *Unit price with basic configuration Volume Discount	6.98 € *Unit price with basic configuration Volume Discount	9.19 € *Unit price with basic configuration Volume Discount	23.14 € *Unit price with basic configuration Volume Discount	4.54 € *Unit price with basic configuration Volume Discount	4.73 € *Unit price with basic configuration Volume Discount	7.12 € *Unit price with basic configuration Volume Discount	10.03 € *Unit price with basic configuration Volume Discount	19.79 € *Unit price with basic configuration Volume Discount	8.50 € *Unit price with basic configuration Volume Discount	14.95 € *Unit price with basic configuration Volume Discount	16.98 € *Unit price with basic configuration Volume Discount	9.03 € *Unit price with basic configuration Volume Discount	15.24 € *Unit price with basic configuration Volume Discount	68.05 € *Unit price with basic configuration Volume Discount	43.81 € *Unit price with basic configuration Volume Discount	49.08 € *Unit price with basic configuration Volume Discount	6.97 € *Unit price with basic configuration Volume Discount	2.94 € *Unit price with basic configuration Volume Discount
Min. Shipping Days ：	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	Same day	15 Days	Same day	Same day	Same day	15 Days	Same day	Same day	Same day	Same day	Same day	15 Days	Same day	Same day	5 Days	Same day
Type	Adjusting Bolt Type	Adjusting Bolt Type	Adjusting Bolt Type	Adjusting Bolt Type	Adjusting Bolt Type	Adjusting Bolt Type	Adjusting Bolt Type	Adjusting Bolt Type	Adjusting Bolt Type	Adjusting Bolt Type	Adjusting Bolt Type	Adjusting Bolt Type	Adjusting Bolt Type	Adjusting Bolt Type	Adjusting Bolt Type	Adjusting Bolt Type	Adjusting Bolt Type	Adjusting Bolt Type	Adjusting Bolt Type	Adjusting Bolt Type	Adjusting Bolt Type	Adjusting Bolt Type	Adjusting Bolt Type	Adjusting Bolt Type
Adjusting Bolt Shape Type	Standard	Standard	With Rubber Foot	Standard	Built-in Bearing	Rubber Foot & Anchor Bolt Fixing Type	Standard	With Rubber Foot	With Rubber Foot	Standard	Anchor Bolt Fixing Type	Rubber Foot & Anchor Bolt Fixing Type	Rubber Foot & Anchor Bolt Fixing Type	Rubber Foot & Anchor Bolt Fixing Type	Rubber Foot & Anchor Bolt Fixing Type	Standard	Standard	Built-in Bearing	With Rubber Foot	Built-in Bearing	Built-in Bearing	Built-in Bearing	Standard	Standard
Swivel Angle θ(deg)	-	-	-	-	-	35	-	-	-	-	-	-	-	-	-	-	15	-	-	-	-	-	-	-
Mounting Shape Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Height Adjusting Handle	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided
Thread Material	Stainless Steel / Steel	Stainless Steel / Steel	Stainless Steel / Steel	Stainless Steel / Steel	Steel	Stainless Steel / Steel	Stainless Steel / Steel	Stainless Steel / Steel	Stainless Steel / Steel	Steel	Stainless Steel / Steel	Stainless Steel / Steel	Steel	Steel	Stainless Steel / Steel	Stainless Steel	Steel	Steel	Stainless Steel / Steel	Steel	Stainless Steel / Steel	Stainless Steel	Stainless Steel / Steel	Stainless Steel / Steel
Thread Surface Treatment	Trivalent Chromate / Others	Trivalent Chromate / Others	Electroplating / Others	Trivalent Chromate / Others	Trivalent Chromate	Bright Chrome Plating / Others	Trivalent Chromate / Others	Trivalent Chromate / Others	Trivalent Chromate / Others	Bright Chrome Plating	Trivalent Chromate / Others	Trivalent Chromate / Others	Bright Chrome Plating	Trivalent Chromate	Trivalent Chromate / Others	Others	Bright Chrome Plating	Electroplating	Trivalent Chromate / Others	Trivalent Chromate	Trivalent Chromate / Others	Others	Trivalent Chromate / Others	Trivalent Chromate / Others
Body Material	Stainless Steel / Cast Iron	Steel	Steel	Stainless Steel / Cast Iron	Steel	Steel	Stainless Steel	Stainless Steel	Stainless Steel / Cast Iron	Steel	Steel	Steel	Steel	Steel	Steel	-	Steel	Steel	Synthetic Rubber (EPDM Synthetic Rubber)	Steel	Stainless Steel / Steel	Stainless Steel	Steel	Steel
Main Body Surface Treatment	Trivalent Chromate / Others	Trivalent Chromate / Others	Coating / Others	Trivalent Chromate / Others	Trivalent Chromate	Bright Chrome Plating / Others	Trivalent Chromate / Others	Trivalent Chromate / Others	Trivalent Chromate / Others	Bright Chrome Plating	Trivalent Chromate / Others	Trivalent Chromate / Others	Bright Chrome Plating	Trivalent Chromate	Trivalent Chromate / Others	Others	Bright Chrome Plating	Coating	Not Provided	Trivalent Chromate	Trivalent Chromate / Others	Others	Trivalent Chromate / Others	Trivalent Chromate / Others
Bottom Rubber Material	-	-	Chloroprene Rubber / Ethylene Propylene Rubber / Silicone	-	-	-	-	Chloroprene Rubber	Chloroprene Rubber	-	-	-	-	-	-	-	-	Chloroprene Rubber	-	Chloroprene Rubber	-	Chloroprene Rubber	ABS Resin	ABS Resin
Thread Length L1(mm)	100 ～ 200	50 ～ 200	50 ～ 200	200 ～ 300	100	100 ～ 150	50 ～ 200	50 ～ 200	100 ～ 180	75 ～ 120	75 ～ 150	50 ～ 200	65	130 ～ 150	50 ～ 180	100 ～ 150	180	70 ～ 130	100 ～ 180	150	100 ～ 200	150	65 ～ 200	50 ～ 100
Main Body Height h(mm)	22 ～ 23	15 ～ 18	13 ～ 17	17 ～ 22	17	17	17	22	27	14	14 ～ 18	17 ～ 19	17	19	17	15 ～ 18	18	15 ～ 17	25 ～ 30	37	29.5 ～ 36.5	22	18 ～ 22	12.5 ～ 13.5
Thread Nominal M(mm)	16 ～ 30	12 ～ 20	8 ～ 20	12 ～ 24	12	12	12 ～ 20	12 ～ 20	16	12	12 ～ 16	12 ～ 20	16	16	12 ～ 16	12 ～ 16	20	12 ～ 20	16 ～ 20	24	20 ～ 30	20	12 ～ 16	8 ～ 10
Properties	Standard / Corrosion Resistance	Standard / Corrosion Resistance	Corrosion Resistance / Vibration Control	Standard / Corrosion Resistance	Vibration Control	Standard / Corrosion Resistance	Standard / Corrosion Resistance	Standard / Corrosion Resistance	Standard / Corrosion Resistance	Standard	Standard / Corrosion Resistance	Standard / Corrosion Resistance / Vibration Control	Standard	Standard	Corrosion Resistance / Vibration Control	Standard / Corrosion Resistance / Vibration Control	Standard	Vibration Control	Corrosion Resistance / Vibration Control	Standard	Standard / Corrosion Resistance	Standard / Corrosion Resistance	Standard / Corrosion Resistance	Standard / Corrosion Resistance
Swivel Mechanism	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided

Filter by:

Stock

- Stock Items Included
Clear

Narrow search by specifying spec./dim.

Type
- Adjusting Bolt Type
- Mounting Type
- Precision Instrument Type
- With Automatic Height Adjusting Function
- Others
- Adjusting Screw with Rubber Grommet
Clear

Adjusting Bolt Shape Type
- Standard
- With Rubber Foot
- Tapped Socket Type
- Anchor Bolt Fixing Type
- Built-in Bearing
- Rubber Foot & Anchor Bolt Fixing Type
Clear

Swivel Angle θ(deg)
4

7.5

10

12

14

15

16

20

30

35

40
Clear

Mounting Shape Type
- Rubber Mount Type
- Metal Mount Type
- Resin Mount Type
Clear

Height Adjusting Handle
- Not Provided
- Provided
Clear

Thread Material
- Stainless Steel
- Steel
- Resin
Clear

Thread Surface Treatment
- Not Provided
- Electrolytic Polishing
- Trivalent Chromate
- Chromate Plating
- Bright Chrome Plating
- Tumble Polish
- Electroless Nickel Plating
- Chrome Plating
- Zinc Plating
- Black Oxide
- Electroplating
- Others
Clear

Body Material
- Stainless Steel
- Steel
- Polyamide
- Polypropylene
- Rubber
- Polyethylene
- Nylon 6
- Other Resins
- Others
- Zinc Alloy
- Synthetic Rubber (EPDM Synthetic Rubber)
- Resin
- Cast Iron
Clear

Main Body Surface Treatment
- Not Provided
- Electrolytic Polishing
- Trivalent Chromate
- Chromate Plating
- Bright Chrome Plating
- Melamine Baked Paint
- Tumble Polish
- Buffed Surface
- Electroless Nickel Plating
- Zinc Plating
- Coating
- Chrome Plating
- Black Oxide
- Others
Clear

Bottom Rubber Material
- Chloroprene Rubber
- Nitrile Rubber
- Ethylene Propylene Rubber
- Polyacetal
- Silicone
- Elastomer
- ABS Resin
- Neoprene Rubber
- Others
- Urethane
- Synthetic Rubber
Clear

Thread Length L1(mm)
5

7

9

11

11.5

11.6

13.5

14

15

16

17

17.5

18

19

19.5

20

21

22

23

24

25

25.5

26

26.5

27

27.5

28

28.5

29

29.5

30

31

31.5

32

34

35

36

36.5

38

39.5

40

41

43

43.5

45

45.5

49.5

50

51

52

52.5

54

55

56

58

59.5

60

61

62

63

63.5

65

65.5

66

67.5

68

69.5

70

71

72

75

78

79

80

85

90

91

93.5

95

95.5

98

99.5

100

103.5

104

108

110

114

117.5

120

122

124

125

126

127

129

130

132

132.5

135.5

136

138

142

143.5

144

145

148

150

154

155

156

157

158

159

160

162

162.5

165.5

168

170

172

174

175

176

177

179

180

182

182.5

184

185.5

186

198

200

206

207

209

210

212

212.5

215.5

220

225

250

280

300
Clear

Main Body Height h(mm)
4

5

5.4

6

7

8

8.5

9

9.5

9.7

9.8

10

10.5

11

11.2

11.5

12

12.5

13

13.5

13.7

14

14.5

15

15.5

16

16.5

17

17.5

17.7

18

18.5

19

20

20.5

20.7

21

21.5

22

22.5

23

23.5

24

24.5

25

26

27

27.5

28

28.2

29

29.5

30

30.5

31

31.5

32

32.5

33

33.2

34

35

35.4

35.5

36

36.5

37

37.5

39

40

41

42

42.5

44

44.5

45

46

46.5

47

48.5

50

51

52

53

54

55

55.5

56

57

58

58~70

60

60.5

61

62

63

64

64.5

65

65~79

65.5

66

67

67.5

68

69

70

70.5

71

72

73

75

76

77

77.5

78

78.5

79

80

81

82

83

84

85

85.5

87

88

89

90

92

93

93.5

94

95

97

98

99

100

101

101.5

105

107

110

112

115

117.5

119

121

123

125

127

128

130

131

140

142

143

144

145

150

153

154

156

157

158

160

161

165

166

170

171

173

175

177

178

180

181

185

190

207

208

210

211

225

227

228

230

231

245
Clear

Thread Nominal M(mm)
5

6

M6

8

M8

10

M10

12

M12

14

16

M16

20

24

28

30

35

45

M45XP2.0
Clear

Properties
- Standard
- Corrosion Resistance
- Oil Resistance
- Chemical Resistance
- Heat Resistance
- Vibration Control
- Impact Resistant
- Electrical Conductivity
Clear

Swivel Mechanism
- Not Provided
- Provided
Clear

Narrow search by specifying Brand

- MISUMI (18)
- Cost Efficient Products ()
- NABEYA (50)
- TAKIGEN (25)
- DAIWARASHI (24)
- IMAO CORPORATION (21)
- ELESA (20)
- KIPP (20)
- HALDER (10)
- GANTER (9)
- NABEYA BI-TECH (5)
- TRUSCO NAKAYAMA (5)
- WAKISANGYO (5)
- EUROFLEX (3)
- KURASHIKI KAKO (3)
- RICH ENGINEERIN (3)
- AMF (2)
- GIFU SANKEN KOGYO (2)
- OHNORUBBER (2)
- SUN FASTENER (2)
- WOOJIN (2)
- SHIMIZU (2)
- 999SHIMANO (1)
- ESCO (1)
- IWATA MFG (1)
- NANSIN (1)
- SUNCO (1)
- YAHATA NEJI (1)
Clear