GANTER Rotary / Swivel Joints
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Swivel ball joints
GANTER
GN 784 swivel ball joints allow precise and variable adjustment of the ball pivot within the rotation range. This is a particular advantage when adjusting scanners, cameras, lighting, monitors, etc.
Thanks to the efficient clamping mechanism, only small amounts of torque on the clamping screw result in comparatively strong clamping pressure on the ball. This force is easily applied by the clamping lever (Identification no.1).
The ball joint can be mounted from below with the d5 internal thread or together with the GN 784.1 flange, available as an accessory, using three through-holes from above.
For a permanent high stop torque, the contact surfaces of the balls must be kept free of grease. Exceeding the recommended tightening torque increases the securing of the ball joint in its end position, but may result in increased wear and potential failure of the clamping mechanism.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 46.00 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Flanges for swivel ball joints GN 784
GANTER
The GN 784.1 flanges are mounted from below onto the GN 784 swivel ball joints GN 784. A half-length tapered groove pin prevents any rotation.
The flange enables the swivel ball joints to be mounted on the upper surface. The d2 section with the three d3 drill holes is configured so that standard screws with washers can be used.
The half-length tapered groove pin is mounted on the flange. The countersunk screw is included separately.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 12.78 € Min. Shipping Days ： Same day *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Type |
| Applicable Fluids |
| Maximum Operating Temperature(°C) |
| Max Operating Pressure(MPa) |
| Max. Rotational Speed(r.p.m) |
| Connection Type |
| Types of Connection Screw for Supply Side (Composite) |
| Types of Connection Screw for Exhaust Side (Composite) |
| Types of Connection Screw for Rotor Side (Composite) |
| Nominal Connection Screw for Supply Side (Composite) |
| Nominal Connection Screw for Exhaust Side (Composite) |
| Types of Connection Screw Supply Side (Single unit, swivel) |
| Type of Connection Screw Exhaust Side (Single unit, swivel) |
| Nominal Connection Screw Supply Side (Single unit, swivel) |
| Nominal Connection Screw Exhaust Side (Single unit, swivel) |
| Nominal of Flange Connection |
|
| |
| Brand | GANTER | GANTER |
| Product Series | ||
| CAD |
|
|
| Starting from∗ | 46.00 € *Unit price with basic configuration Volume Discount | 12.78 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | Same day | Same day |
| Type | - | - |
| Applicable Fluids | - | - |
| Maximum Operating Temperature(°C) | - | - |
| Max Operating Pressure(MPa) | - | - |
| Max. Rotational Speed(r.p.m) | - | - |
| Connection Type | - | - |
| Types of Connection Screw for Supply Side (Composite) | - | - |
| Types of Connection Screw for Exhaust Side (Composite) | - | - |
| Types of Connection Screw for Rotor Side (Composite) | - | - |
| Nominal Connection Screw for Supply Side (Composite) | - | - |
| Nominal Connection Screw for Exhaust Side (Composite) | - | - |
| Types of Connection Screw Supply Side (Single unit, swivel) | - | - |
| Type of Connection Screw Exhaust Side (Single unit, swivel) | - | - |
| Nominal Connection Screw Supply Side (Single unit, swivel) | - | - |
| Nominal Connection Screw Exhaust Side (Single unit, swivel) | - | - |
| Nominal of Flange Connection | - | - |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Type
- Simplex
- Duplex Inner Tube Fixed Type
- Duplex Inner Tube Rotary Type
- Swivel Joints
-
Applicable Fluids
- Water
- Air
- Vapor
- Gas
- Oil
-
Maximum Operating Temperature(°C)
-
Max Operating Pressure(MPa)
-
Max. Rotational Speed(r.p.m)
-
Connection Type
- Thread-to-Thread, Connection
- Thread-to-Flange Connection
- Flange-to-Flange connection
- Thread-to-Single-Action Plug Connection
- Thread-to-Single-Action Socket Connection
- Thread-to-Tube Connection
- Plug-to-Tube Connection
- Thread-to-Hose (Barb) Connection
-
Types of Connection Screw for Supply Side (Composite)
-
Types of Connection Screw for Exhaust Side (Composite)
-
Types of Connection Screw for Rotor Side (Composite)
-
Nominal Connection Screw for Supply Side (Composite)
-
Nominal Connection Screw for Exhaust Side (Composite)
-
Types of Connection Screw Supply Side (Single unit, swivel)
-
Type of Connection Screw Exhaust Side (Single unit, swivel)
-
Nominal Connection Screw Supply Side (Single unit, swivel)
-
Nominal Connection Screw Exhaust Side (Single unit, swivel)
-
Nominal of Flange Connection
Narrow search by specifying Brand
-
- SHOWA GIKEN INDUSTRIAL (32)
- IFIELD (10)
- BRIDGESTONE (7)
- IHARA SCIENCE (3)
- GANTER (2)
- PREVOST (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Examples how you can use these components Test
Categories related to Rotary / Swivel Joints
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.