HALDER Workpiece clamps (horizontal clamping direction)
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Lateral Spring Plungers, with spring steel sheet
HALDER
To be used for positioning and applying pressure.- 3D CAD data available
Starting from∗ ： 16.47 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Taper Clamping Units
HALDER
Inserting the socket head screw moves the two clamping chucks outwards and presses the workpieces against a stop. Using the double taper, an additional vertical clamping force will be achieved. Stroke of taper clamping units with M 5 = ±0,5, M 8 = ±0,5, M 12 = ±1 and M 16 = ±1,5. Can be mounted in a threaded hole or with T-nuts for horizontal or vertical multiple clamping.- 3D CAD data available
Starting from∗ ： 44.20 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Locating Clamps
HALDER
Suitable for a simultaneous "positioning" and "clamping" of workpieces. The locating element is a precision element which can be assembled from either side. The clamping and locating part adapted to the workpiece is screwed to the cylindrical support. Clamping and locating parts are manufactured by the user according to the individual requirements.- 3D CAD data available
Starting from∗ ： 446.14 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Push Plungers, with pin, protected against rotating
HALDER
The push plunger is suitable for easy and safe positioning of workpieces or components prior to clamping or assembly.Locating pins of your own profile or design can be attached to our threaded pin types.- 3D CAD data available
Starting from∗ ： 27.31 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Stabilizing Clamping Jaws
HALDER
Due to the big clamping jaw, this clamping element is suitable for lateral clamping of high workpieces.The clamping force acts forwards and downwards. Clamping plate is turnable, i.e. to the ground or ribbed side.- 3D CAD data available
Starting from∗ ： 331.07 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Sub-Part Clamp
HALDER
The sub-part clamp and the sub-part stop enable workpieces to be clamped on the front face. This allows the full area of the machine table to be used to clamp the workpiece.- down-hold effect through an angled jaw face- clamping of large workpieces on the whole of the machine table- large clamping forces of up to 20 kN- solid version made of vibration-eliminating ductile iron- optimal adaption to the workpiece and material through the use of clamping inserts and interchangeable jaws- force closure is possible with a fixed slot tenon EH 23110. in a T-slot- minimum interference of clamping areas - even for large workpieces- location holes at the sides for fastening of longitudinal stops if required- 3D CAD data available
Starting from∗ ： 335.24 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Clamping Vices / moveable jaw
HALDER
The clamping vice is a solid, compact clamping module with a horizontally acting clamping force and a robust mechanical spindle.- clamping force up to max. 80 kN- clamping stroke 25 mm via screw drive WS 36- fixture via 4 cap screws M 24, quality 8.8 (tightening torque 600 Nm) with a hole spacing 100 x 100 mm- suitable clamping jaws 23231.0020 - .0033 are available- 3D CAD data available
Starting from∗ ： 2,440.17 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Double Edge Clamps
HALDER
Inserting the socket head screw moves the two clamping chucks outwards and presses the workpiece against a stop.- 3D CAD data available
Starting from∗ ： 28.77 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Double Edge Clamps, machinable chucks
HALDER
Inserting the socket head screw moves the two clamping chucks outwards and presses the workpiece against a stop.The chucks can be machined to the needed workpiece contour. The locking plate is needed only for this machining, not for the workpiece clamping.- 3D CAD data available
Starting from∗ ： 62.58 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 106.76 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Interchangeable Jaws, for vices, with pull-down effect
HALDER
The interchangeable jaws - held by 2 permanent magnets - can be inserted and exchanged with a manual handle.- 3D CAD data available
Starting from∗ ： 246.26 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 23.37 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Max. Clamping Force(N) |
| Material |
| Type |
| Type |
| Applicable Tightening Force(N) |
| Stroke S(mm) |
| Attaching Portion Shape |
| Arm Height Type |
| Arm Height H(mm) |
| Arm Length Type |
| Arm Length L(mm) |
| Tip Bolt Type |
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER |
| Product Series | ||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
| |
| Starting from∗ | 16.47 € *Unit price with basic configuration | 44.20 € *Unit price with basic configuration | 446.14 € *Unit price with basic configuration | 27.31 € *Unit price with basic configuration | 331.07 € *Unit price with basic configuration | 335.24 € *Unit price with basic configuration | 2,440.17 € *Unit price with basic configuration | 28.77 € *Unit price with basic configuration | 62.58 € *Unit price with basic configuration | 106.76 € *Unit price with basic configuration | 246.26 € *Unit price with basic configuration | 23.37 € *Unit price with basic configuration |
| Min. Shipping Days ： | Same day | Same day | 4 Days | Same day | 4 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 2 Days |
| Max. Clamping Force(N) | - | - | - | - | - | - | - | - | - | - | - | - |
| Material | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Aluminum Alloy | Aluminum Alloy | Steel | Steel | - |
| Type | - | - | - | - | - | - | - | - | - | - | - | - |
| Type | Side Push | Side Push | Side Push | Side Push | Side Push | Side Push | Side Push | Side Push | Side Push | Side Push | Side Push | - |
| Applicable Tightening Force(N) | - | - | - | - | - | - | - | - | - | - | - | - |
| Stroke S(mm) | 1.5 | - | - | 6 ～ 10 | - | - | - | - | - | - | - | - |
| Attaching Portion Shape | Flange Base | Straight Base | Straight Base | Straight Base | Straight Base | - | - | Straight Base | Straight Base | - | - | - |
| Arm Height Type | - | - | Standard | - | - | - | - | - | - | - | - | - |
| Arm Height H(mm) | - | - | - | - | - | - | - | - | - | - | - | - |
| Arm Length Type | - | - | Standard | - | - | - | - | - | - | - | - | - |
| Arm Length L(mm) | - | - | - | - | - | - | - | - | - | - | - | - |
| Tip Bolt Type | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Max. Clamping Force(N)
- Up to 100
- 100 to 1000
- 1000 to 3000
- 3000 or More
-
Material
- Steel
- Stainless Steel
- Aluminum Alloy
- MC Nylon
- Zinc Alloy
-
Type
- Main Body
- Optional Components
-
Type
-
Applicable Tightening Force(N)
-
Stroke S(mm)
-
Attaching Portion Shape
-
Arm Height Type
-
Arm Height H(mm)
-
Arm Length Type
-
Arm Length L(mm)
-
Tip Bolt Type
- Not Provided
Narrow search by specifying Brand
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Workpiece clamps (horizontal clamping direction)
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.