IMAO CORPORATION Spring Plungers
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Short Plunger (ZSP, SPL, SPLH)
IMAO CORPORATION
The total length is short, so it performs well in tight spaces. Three types of loads are available for each screw diameter (some exclusions).
[Features]
- Each product has a mark on the back for product identification.
- ZSP: 1 line SPLH: 2 lines.
- Convenient as the total length is short and so can be used in narrow spaces.- 2D / 3D CAD data available
Starting from∗ ： 3.72 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spring Plunger (ZP, PL, PLH, ZN, PLN)
IMAO CORPORATION
It is the spring plunger standard. Three types of loads for each screw diameter (except some) are available. In addition, various types of materials are available.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 7.19 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Short Plunger (with Long Lock) (LSPLL, LSPL, LSPLH)
IMAO CORPORATION
Short plunger type with locking attached. For each screw diameter 3 types of loads have been prepared (exceptions occur).
[Features]
- Useful as the overall length enables the utilization of short narrow spaces.
- With loosening prevention function (long lock).
- Sturdy against vibration and has a high detachment moment.
- Can be positioned reliably.
- The loosening prevention function will work for up to approximately 20 insertions and detachments.
- A marking is attached to the rear surface of each product for product identification.- 2D / 3D CAD data available
Starting from∗ ： 6.52 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Short Plunger (ZSP-SUS, SPL-SUS, SPLH-SUS)
IMAO CORPORATION
Stainless steel product that is ideal for locations that require rust proof materials and for use in clean environments. Small total length, so performs well in tight spaces. Three types of loads available for each screw diameter (some exclusions).
[Features]
- Each product has a mark on the back for identification. ZSP-SUS: Single line. SPLH-SUS: The two line total length is short so it is convenient for use in tight spaces.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 5.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spring Plunger (with Long Lock) (LPL, LPLN)
IMAO CORPORATION
Spring plunger type with locking. Resin (LPLN) type nose also available. For each screw diameter 3 types of loads have been prepared (exceptions occur). Also prepared in various types of materials.- 2D / 3D CAD data available
Starting from∗ ： 9.10 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spring Plunger (with Long Lock) (LPL-SUS, LPLH-SUS)
IMAO CORPORATION
Spring plunger type with locking. Stainless steel product ideal locations requiring rust prevention and for clean environments. For each screw diameter two types of loads have been prepared.
[Features]
- A marking is attached to the rear surface of each product for product identification.
- LBSUH-SUS: With 2 line loosening prevention function (long lock).
- Strong against vibration, detachment moment is high, for reliable positioning.
- The loosening prevention function will work for up to approximately 20 insertions and detachments.- 2D / 3D CAD data available
Starting from∗ ： 22.11 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Short Plunger (with Long Lock) (LSPLL-SUS, LSPL-SUS, LSPLH-SUS)
IMAO CORPORATION
Short plunger type with locking attached. Stainless steel product ideal locations requiring rust prevention and for clean environments. For each screw diameter 3 types of loads have been prepared (exceptions occur).
[Features]
- Useful as the overall length enables the utilization of short narrow spaces.
- With loosening prevention function (long lock).
- Sturdy against vibration and has a high detachment moment.
- Can be positioned reliably.
- The loosening prevention function will work for up to approximately 20 insertions and detachments.
- A marking is attached to the rear surface of each product for product identification.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 10.46 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Tip Material |
| Body Material |
| Body O.D./Thread M(mm) |
| Stroke S(mm) |
| Mounting Method |
| Loosening Prevention |
| Pin Plunger Type |
| Wrench Hole Shape |
| Main Body Surface Treatment |
| Tip Surface Treatment |
| Tip Heat Treatment |
| Initial Load (Range)(N) |
|
|
|
|
|
|
| |
| Brand | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION |
| Product Series | Short Plunger (with Long Lock) (LSPLL-SUS, LSPL-SUS, LSPLH-SUS) | ||||||
| CAD |
|
|
|
|
|
|
|
| Starting from∗ | 3.72 € *Unit price with basic configuration | 7.19 € *Unit price with basic configuration Volume Discount | 6.52 € *Unit price with basic configuration | 5.17 € *Unit price with basic configuration Volume Discount | 9.10 € *Unit price with basic configuration | 22.11 € *Unit price with basic configuration | 10.46 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days |
| Tip Material | Steel | Steel / Stainless Steel / Resin | Steel | Stainless Steel | Steel / Resin | Stainless Steel | Stainless Steel |
| Body Material | Steel | Steel / Stainless Steel | Steel | Stainless Steel | Steel | Stainless Steel | Stainless Steel |
| Body O.D./Thread M(mm) | 4 ～ 20 | 3 ～ 24 | 4 ～ 16 | 4 ～ 20 | 5 ～ 16 | 5 ～ 16 | 4 ～ 16 |
| Stroke S(mm) | 1.5 ～ 6.5 | 1.5 ～ 10 | 1.5 ～ 4.5 | 1.5 ～ 6.5 | 2.3 ～ 5 | 2.3 ～ 5 | 1.5 ～ 4.5 |
| Mounting Method | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In |
| Loosening Prevention | Not Provided | Not Provided | Provided | Not Provided | Provided | Provided | Provided |
| Pin Plunger Type | Spherical | Spherical | Spherical | Spherical | Spherical | Spherical | Spherical |
| Wrench Hole Shape | Negative | Hex | Negative | Negative | Hex | Hex | Negative |
| Main Body Surface Treatment | Black Oxide | Not Provided / Black Oxide | Black Oxide | Not Provided | Black Oxide | Not Provided | Not Provided |
| Tip Surface Treatment | Black Oxide / Zinc Plating | Not Provided / Black Oxide | Black Oxide / Zinc Plating | Not Provided | Not Provided / Black Oxide / Zinc Plating | Not Provided | Not Provided |
| Tip Heat Treatment | Carburized | Hardened / Carburized | Carburized | Hardened | Carburized | Hardened | Hardened |
| Initial Load (Range)(N) | 0.01 to 50 / 50.01 to 100 | 0.01 to 50 / 50.01 to 100 | 0.01 to 50 / 50.01 to 100 | 0.01 to 50 / 50.01 to 100 | 0.01 to 50 / 50.01 to 100 | 0.01 to 50 | 0.01 to 50 / 50.01 to 100 |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Tip Material
-
Body Material
- Steel
- Stainless Steel
- Resin
-
Body O.D./Thread M(mm)
-
Stroke S(mm)
-
Mounting Method
-
Loosening Prevention
- Not Provided
- Provided
-
Pin Plunger Type
-
Wrench Hole Shape
-
Main Body Surface Treatment
-
Tip Surface Treatment
-
Tip Heat Treatment
-
Initial Load (Range)(N)
Narrow search by specifying Brand
-
- MISUMI (13)
- KIPP (67)
- HALDER (14)
- KONISHI MFG (11)
- IMAO CORPORATION (7)
- NABEYA BI-TECH (6)
- NABEYA (3)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Spring Plungers
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.