Hammers

?* Information on days to ship and prices

• 

  Copper Hammer Replacement Head

  OHINDUSTRIAL

  The body section of the copper hammer is made of whiteheart malleable cast iron that has been heat treated, so there is no distortion of the handle hole, and the handle is unlikely to break.

  Select to compare

  › Configure now
  Starting from∗ ：	14.05 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  G Kappa Hammer

  OHINDUSTRIAL

  [Features]
  · This uses a glass fiber handle and therefore it reduces handle breakage when it is used under extreme work conditions.
  · Copper hammer with a replaceable head.
  [Applications]
  · For hard striking when installing jigs, repairing machines, and manufacturing dies.

  Select to compare

  › Configure now
  Starting from∗ ：	83.10 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  O.H.Industrial Shockless Hammer

  OHINDUSTRIAL

  [Features]
  It can work comfortably absorbing recoil because lead shots are contained inside.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	47.34 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Copper Hammer

  OHINDUSTRIAL

  [Features]
  Handle hole would not get deformed and the handle is not easy to be broken, as the body of Copper Hammer undergoes heat treatment through a whiteheart malleable cast iron.
  - Copper hammer with a replaceable head.
  [Applications]
  - Ideal for molding work.
  - Removing strain on steel plates.

  Select to compare

  › Configure now
  Starting from∗ ：	55.06 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Steel Double-Face Hammer

  OHINDUSTRIAL

  [Features]
  · Suitable for heavy work.
  · Equipped with an aluminum sleeve to protect the connecting wire from being cut by the edge of the pipe handle.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	43.09 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Combination Hammer

  MAEDAKINNZOKU

  A high strength black shaft hammer with a stainless steel head and an urethane head.

  Select to compare

  › Configure now
  Starting from∗ ：	31.29 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Replacement head for shock-less hammer

  OHINDUSTRIAL

  [Features]
  -This is a replacement head for the shockless hammer.
  -1 roll pin is included per head.

  Select to compare

  › Configure now
  Starting from∗ ：	10.68 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  SIMPLEX soft-face mallet 50 to 40

  HALDER

  Oversized striking faces provide maximum protection for the precise treatment of workpieces with sensitive surfaces.

  Select to compare

  › Configure now
  Starting from∗ ：	46.75 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  SUS Combination Hammer

  MAEDAKINNZOKU

  For driving pins etc,, assembly or striking work in attachment adjustment

  Select to compare

  › Configure now
  Starting from∗ ：	87.71 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Compothane Hammer

  MAEDA SHELL SERVICE

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	88.52 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Double-Ended Hammer

  OHINDUSTRIAL

  [Features]
  · Suitable for construction work and civil engineering work in general.
  · Hardened handle with an anti-slip rubber grip. (#6 – #12)
  · Quality white oak material used for handle.
  [Applications]
  · Overall architectural and civil engineering work.
  · For driving anchors and survey spikes.

  Select to compare

  › Configure now
  Starting from∗ ：	66.12 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Component Hammer (Long)

  OHINDUSTRIAL

  [Features]
  · A one-piece molded product with urethane resin that prevents handle breaking and thus ensures safety of workers.
  [Applications]
  · For repairing machines and installation and removal of jigs, etc.

  Select to compare

  › Configure now
  Starting from∗ ：	83.60 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  LightOn copper hammer

  OHINDUSTRIAL

  [Features]
  Head material: rolled copper
  Handle material: polypropylene (PP)
  -Handle material: soft PVC (PVC).

  Select to compare

  › Configure now
  Starting from∗ ：	51.82 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  O.H.Industrial Copper Hammer

  OHINDUSTRIAL

  [Features]
  Long life as the head is made of wrought copper and not heat-processed and viscous.
  - The product life is 2 times longer than cast copper hammers.
  [Applications]
  For installing/removing aluminum sash frames.

  Select to compare

  › Configure now
  Starting from∗ ：	32.07 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Octagonal wooden maul

  TOMBO INDUSTRY

  Select to compare

  › Configure now
  Starting from∗ ：	98.19 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Fundo Copper Hammer

  FUNDO

  [Features]
  - A durable and long life copper hammer whose head is pressure casted with 99.99 % acid-free copper and wooden handle is made of domestic first class oak.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	82.84 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Simplex Hammer Insert For Simplex

  HALDER

  [Applications]
  · Laying of tiles, dent repair work, home furniture creation, window and door creation and carpentry

  Select to compare

  › Configure now
  Starting from∗ ：	3.51 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Super Craft Hammer EH 3366

  HALDER

  [Applications]
  · Assembly and repair of automobiles, position correction of components over a machine vice, test set up, vehicle body work, repair/maintenance work, repair of components, assembly of housing and components that have sharp corners, joining of components and machining of sheet metal

  Select to compare

  › Configure now
  Starting from∗ ：	30.91 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  SUPERCRAFT sledge hammer, with vibration-reducing, ergonomic and varnished Hickory handle

  HALDER

  The head of the SUPERCRAFT mallet is filled with steel shot. This means that when the workpiece is impacted, the energy of the shot is transferred with a slight delay. The reduced rebound allows the impact energy to be absorbed, resulting in extremely powerful impact without vibration which is much easier on your joints. Additionally, an advantage over steel mallets is the reduced noise level.
  Application Areas
  Hall construction, steel construction, exhibition stand construction, concrete formwork, scaffold construction, tent construction, fence construction, driving metal wedges and stakes, straightening work, maintenance work
  Completely robot-welded, handle-protection sleeve, very safe handle-head-connection due to aluminium wedge and safety pin, robust powder coating, maximum solidity of the inserts made from special nylon with excellent impact quality and very high durability, handle and inserts replaceable

  Select to compare

  › Configure now
  Starting from∗ ：	387.33 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Copper Head Dead Blow Mallet

  PB SWISS TOOLS

  [Specifications]
  ·PB Swiss Tools hammer, recoilless copper hammer.
  ·Head material: Steel
  ·Handle material: hickory

  Select to compare

  › Configure now
  Starting from∗ ：	82.38 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Soft-face hammer

  FACOM

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	52.20 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Replacement screw, for housing for SIMPLEX splitting axe

  HALDER

  Notes

  Including screw, nut and spring washer.

  Select to compare

  › Configure now
  Starting from∗ ：	3.46 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Electrician's Hammer with 300g Hammer Head

  WIHA

  Simplifies your work: Flat claws allow you to remove nails and nail clamps easily.

  Increases your efficiency: Perfect balance thanks to optimum weight distribution for effective handling.

  Improved access: Perfectly suited for use in confined working environments thanks to the combination of a square and round head shape.

  Increases the quality of your work: The flat surface on the hammer handle ensures cables and dowels are fitted into position without causing any damage.

  Application: Easily removes nails and nail clamps or positions cables and dowels. Ideal for use in a confined working environment.

  It's difficult to access confined spaces and corners with a conventional fitter's hammer and all too often unsightly marks are left on the surrounding surfaces. That's not the case with Wiha's electrician's hammer. With its U-shaped striking surface, it provides optimum access to tight spaces. This hammer unites ergonomic handling, balanced weight distribution and the ability to remove fastening elements such as nail clamps. With its optimally uniform weight distribution, it promises perfect balance, delivering impact and fatigue-free work. The flat, straight claws on the hammer head enable users to remove nail clamps even from difficult-to-reach spots and pull nails quickly and easily from the wall. The flat surface on the hammer handle means cables and dowels are positioned effectively without causing any damage to the wall. Thanks to the ergonomically designed, non-slip handle, the electrician's hammer fits perfectly into the hand, ensuring a secure hold when striking.

  For applications in electrics

  Select to compare

  › Configure now
  Starting from∗ ：	30.55 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Soft-Faced Safety Hammer, Medium-Soft/Very Hard, with Hickory Wooden Handle, Round Hammer Face

  WIHA

  Meets your requirements: Black hammer head / medium soft: e.g. for paving, tiling, dry wall construction. White hammer head / very hard: e.g. for building and construction, mould construction, road construction, gardening and landscaping.

  Simplifies your work: Makes work easier, optimum impact effect and less effort needed.

  Lowers your costs: Ergonomic hickory wooden handle and hammer head both available as spare parts.

  Striking power

  GS tested.

  Select to compare

  › Configure now
  Starting from∗ ：	19.95 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  SIMPLEX sledge hammer, Rubber composition with "Stand-Up"

  HALDER

  Material

  Handle

  • Hickory
  

  Housing

  • Cast iron
  

  Select to compare

  › Configure now
  Starting from∗ ：	59.33 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Urethane Shockless Hammer

  MAEDAKINNZOKU

  Specially molded with urethane resin and then has excellent product life and durability. An easy-to-use hammer with a recoilless structure which reduces tiredness.

  Select to compare

  › Configure now
  Starting from∗ ：	50.28 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Black Shaft Hammer:

  MAEDAKINNZOKU

  To be used to strike when driving pins etc., attachment adjustment, R-shape bending, processing crimp beads on rivet tips etc. Shaft is lightweight and of high strength with fiberglass.

  Select to compare

  › Configure now
  Starting from∗ ：	27.72 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  AP Wooden Hammer

  ASAKA INDUSTRIAL

  The resin head creates rebound on impact, making it easy to lift up

  Select to compare

  › Configure now
  Starting from∗ ：	72.74 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Extending Tapping Stick

  DOGYU INDUSTRIAL

  [Features]
  · Expandable for convenient portability.
  [Applications]
  · Hammer tapping test of walls, etc.

  Select to compare

  › Configure now
  Starting from∗ ：	46.08 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Extending Pumpkin Ball Counting Stick

  DOGYU INDUSTRIAL

  [Features]
  · The ball part has an irregular shape reminiscent of a pumpkin.
  · It is perfect for examining concrete/mortar surfaces.
  · High sound volume.
  [Applications]
  · Hammer tapping test of walls, etc.

  Select to compare

  › Configure now
  Starting from∗ ：	70.57 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Scope auscultation rod

  DOGYU INDUSTRIAL

  [Features]
  As both hands can be used as per stethoscope (scope) specification, you can check correctly the spot inspection while watching them.
  [Use]
  Inspection tool for hearing abnormal sound.

  Select to compare

  › Configure now
  Starting from∗ ：	61.90 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Excel Antibacterial Hammer (Compatible with HACCP)

  MAEDA SHELL SERVICE

  Select to compare

  › Configure now
  Starting from∗ ：	135.39 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Unicon hammer

  MAEDA SHELL SERVICE

  [Features]
  Two types of heads, of metal and of urethane, are selectively used depending on the application.
  - The urethane head does not damage the surface of precision equipment and strike sound is quiet without sparks.
  - The metal head part provides little reaction but large impact power.
  - The urethane head part provides appropriate reaction.

  Select to compare

  › Configure now
  Starting from∗ ：	116.17 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Wooden hammer (Mallet)

  MORIMITSU

  [Features]
  It can be used in processing of general sheet metals, including bending and crushing.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	13.92 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Break-in hammer (horizontal break-in)

  MORIMITSU

  [Features]
  -It is suitable for flattening and stretching.
  -Head material: carbon steel
  -Handle material: oak.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	36.37 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Tack hammer

  MORIMITSU

  [Features]
  It is most suitable for sheet metal processing operations, such as hammering and crushing work.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	33.12 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Roof Hammer

  MORIMITSU

  [Features]
  · A glass fiber handle with a head shape that is unlikely to be damaged.
  · With protector ring.
  [Applications]
  · A universal hammer for construction and sheet metal work.
  · For general nailing and sheet metal machining.

  Select to compare

  › Configure now
  Starting from∗ ：	48.12 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Wooden Handle for Sheet Metal Hammer

  MORIMITSU

  [Features]
  -This is a replacement handle for the hammer.
  -Handle material: oak
  -Product type: wooden handle for hammers.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	5.70 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Plastic Hammer / Combination Hammer

  KTC(KYOTO TOOL)

  [Features]
  It is a handle with tapered shape to increase the work efficiency fitting comfortably in one's hands.
  Reinforced nylon, which is less likely to result in cut to head and chipping, reduces the trouble of being mixed into the machine.
  - Slit processing is implemented on the wooden handle for slip prevention.
  - The head can be replaced
  [Applications]
  - A general-purpose tool

  Select to compare

  › Configure now
  Starting from∗ ：	44.97 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Combination Hammer (1 Pound)

  KTC(KYOTO TOOL)

  [Features]
  A handle with tapered shape to increase the work efficiency fitting comfortably in one's hands is used.
  - A combination iron and plastic hammer that allow you to perform 2 kinds of work with 1 tool.
  - The head can be replaced only on the resin side.
  [Applications]
  - General-purpose Tools

  Select to compare

  › Configure now
  Starting from∗ ：	32.87 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Single Opening Hammer

  OHINDUSTRIAL

  [Features]
  · Eccentric handle hole for easy swiveling and strong striking force.
  [Applications]
  · For all architectural and general civil engineering work.

  Select to compare

  › Configure now
  Starting from∗ ：	62.26 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  O.H.Industrial One Handed Hammer

  OHINDUSTRIAL

  [Features]
  · Quality oak material used for handle.
  [Applications]
  · For general, engraving, punching and scribing ironwork.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	17.34 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  LightOn soft iron hammer

  OHINDUSTRIAL

  [Features]
  Double-molded polypropylene handle fits close to the hand for easy grip, increasing work efficiency.
  [Applications]
  - For assembling machines or fine adjustment work.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	61.58 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Glass Single-Handed Hammer

  OHINDUSTRIAL

  [Features]
  · This uses a glass fiber handle and therefore it is unlikely to break, even when it is used under extreme conditions, making it safe.
  [Applications]
  · For general ironwork.
  · Engraving, marking and punch driving.

  Select to compare

  › Configure now
  Starting from∗ ：	35.57 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Bi-head Hammer

  OHINDUSTRIAL

  [Features]
  It is suitable for construction and civil engineering work in general.
  [Applications]
  For construction and civil engineering work in general.
  For driving in anchors, measuring pegs, etc.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	42.79 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

Loading...