Ejector pins / head flattened on one side / EN 1.3343 Equiv. / machined end / Z-point / length Configurable
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
| Part Number | Minimum order quantity | Volume Discount | RoHS | Shaft diameter tolerance (Reference tolerance) | D/P (Shaft diameter) (mm) | L (L dimension) (mm) | F (Z groove position) (mm) | G (Z groove angle) (°) | V (Z groove position) (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Quote | 10 | 0/-0.005 | 2 | 50 ～ 300 | 40 ～ 290 | 0 ～ 45 | 1.5 | ||
| 1 | Quote | 10 | 0/-0.005 | 2.5 | 50 ～ 300 | 40 ～ 290 | 0 ～ 45 | 1.5 ～ 2 | ||
| 1 | Quote | 10 | 0/-0.005 | 3 | 50 ～ 300 | 40 ～ 290 | 0 ～ 45 | 1.5 ～ 2.5 | ||
| 1 | Quote | 10 | 0/-0.005 | 4 | 50 ～ 350 | 40 ～ 340 | 0 ～ 45 | 1.5 ～ 3.5 | ||
| 1 | Quote | 10 | 0/-0.005 | 5 | 50 ～ 350 | 40 ～ 340 | 0 ～ 45 | 1.5 ～ 4.5 | ||
| 1 | Quote | 10 | 0/-0.005 | 6 | 50 ～ 350 | 40 ～ 340 | 0 ～ 45 | 1.5 ～ 5.5 | ||
| 1 | Quote | 10 | 0/-0.005 | 7 | 50 ～ 350 | 40 ～ 340 | 0 ～ 45 | 1.5 ～ 6.5 | ||
| 1 | Quote | 10 | 0/-0.005 | 8 | 50 ～ 350 | 40 ～ 350 | 0 ～ 45 | 1.5 ～ 7.5 | ||
| 1 | Quote | 10 | -0.01/-0.02 | 2 | 50 ～ 300 | 40 ～ 290 | 0 ～ 45 | 1.5 | ||
| 1 | Quote | 10 | -0.01/-0.02 | 2.5 | 50 ～ 300 | 40 ～ 290 | 0 ～ 45 | 1.5 ～ 2 | ||
| 1 | Quote | 10 | -0.01/-0.02 | 3 | 50 ～ 300 | 40 ～ 290 | 0 ～ 45 | 1.5 ～ 2.5 | ||
| 1 | Quote | 10 | -0.01/-0.02 | 4 | 50 ～ 350 | 40 ～ 340 | 0 ～ 45 | 1.5 ～ 3.5 | ||
| 1 | Quote | 10 | -0.01/-0.02 | 5 | 50 ～ 350 | 40 ～ 340 | 0 ～ 45 | 1.5 ～ 4.5 | ||
| 1 | Quote | 10 | -0.01/-0.02 | 6 | 50 ～ 350 | 40 ～ 340 | 0 ～ 45 | 1.5 ～ 5.5 | ||
| 1 | Quote | 10 | -0.01/-0.02 | 7 | 50 ～ 350 | 40 ～ 340 | 0 ～ 45 | 1.5 ～ 6.5 | ||
| 1 | Quote | 10 | -0.01/-0.02 | 8 | 50 ～ 350 | 40 ～ 340 | 0 ～ 45 | 1.5 ～ 7.5 |
Loading...
Basic information
| Shape type | With tip processing | Material | EN 1.3343 Equiv. | L dimension tolerance (Reference tolerance) | +0.02/0 or +0.05/0 |
|---|---|---|---|---|---|
| Surface treatment | No | Head thickness | 4mm(T4) | Tip shape | 5A |
| Gas release shape | No | Character engraving type | No | Number of engraving characters | No |
Configure
Basic Attributes
-
Shaft diameter tolerance (Reference tolerance)
- -0.01/-0.02
- 0/-0.005
-
D/P (Shaft diameter)(mm)
-
L (L dimension)(mm)
-
F (Z groove position)(mm)
-
G (Z groove angle)(°)
-
V (Z groove position)(mm)
-
Type
- Z-EPH-L
- Z-EPHE-L
-
Filter by CAD data type
- 2D
- 3D
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Způsob platby
Platba na účet
Zálohová platba
Výroba na vyžádání
Certifikáty
Copyright © MISUMI Corporation Všechna práva vyhrazena.