Core pins / head shape selectable / HSS / machined end / shank diameter configurable
Click on this image to zoom in.
Click on this image to zoom in.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
| Part Number | Minimum order quantity | Volume Discount | RoHS | Head thickness | Shaft diameter tolerance | D/P (Shaft diameter) (mm) | Tip shape | Applicable ejector sleeves inner diameter tolerance | No. (Nominal diameter) (mm) | C (C chamfering width on the tip) (mm) | K (Taper angle) (°) | L (L dimension) (mm) | R (Tip R chamfering) (mm) | S (Tip tapered width) (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Quote | 10 | 8mm(JIS) | 0/-0.005 | 8 ～ 9.99 | B | - | 10 | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 8mm(JIS) | 0/-0.005 | 10 ～ 11.99 | B | - | 12 | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 8mm(JIS) | 0/-0.005 | 8 ～ 9.99 | C | - | 10 | 0.1 ～ 4.9 | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 8mm(JIS) | 0/-0.005 | 10 ～ 11.99 | C | - | 12 | 0.1 ～ 5.9 | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 8mm(JIS) | 0/-0.005 | 8 ～ 9.99 | G | - | 10 | - | 45 ～ 89 | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 8mm(JIS) | 0/-0.005 | 10 ～ 11.99 | G | - | 12 | - | 45 ～ 89 | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 8mm(JIS) | 0/-0.005 | 8 ～ 9.99 | R | - | 10 | - | - | 50 ～ 350 | 0.2 ～ 4.9 | - | ||
| 1 | Quote | 10 | 8mm(JIS) | 0/-0.005 | 10 ～ 11.99 | R | - | 12 | - | - | 50 ～ 350 | 0.2 ～ 5.9 | - | ||
| 1 | Quote | 10 | 8mm(JIS) | 0/-0.005 | 8 ～ 9.99 | T | - | 10 | - | 1 ～ 45 | 50 ～ 350 | - | 0.1 ～ 20 | ||
| 1 | Quote | 10 | 8mm(JIS) | 0/-0.005 | 10 ～ 11.99 | T | - | 12 | - | 1 ～ 45 | 50 ～ 350 | - | 0.1 ～ 24 | ||
| 1 | Quote | 10 | 8mm(JIS) | -0.01/-0.02 | 8 ～ 9.99 | B | +0.01/0 or H7 | 10 | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 8mm(JIS) | -0.01/-0.02 | 10 ～ 11.99 | B | +0.01/0 or H7 | 12 | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 8mm(JIS) | -0.01/-0.02 | 8 ～ 9.99 | C | +0.01/0 or H7 | 10 | 0.1 ～ 4.9 | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 8mm(JIS) | -0.01/-0.02 | 10 ～ 11.99 | C | +0.01/0 or H7 | 12 | 0.1 ～ 5.9 | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 8mm(JIS) | -0.01/-0.02 | 8 ～ 9.99 | G | +0.01/0 or H7 | 10 | - | 45 ～ 89 | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 8mm(JIS) | -0.01/-0.02 | 10 ～ 11.99 | G | +0.01/0 or H7 | 12 | - | 45 ～ 89 | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 8mm(JIS) | -0.01/-0.02 | 8 ～ 9.99 | R | +0.01/0 or H7 | 10 | - | - | 50 ～ 350 | 0.2 ～ 4.9 | - | ||
| 1 | Quote | 10 | 8mm(JIS) | -0.01/-0.02 | 10 ～ 11.99 | R | +0.01/0 or H7 | 12 | - | - | 50 ～ 350 | 0.2 ～ 5.9 | - | ||
| 1 | Quote | 10 | 8mm(JIS) | -0.01/-0.02 | 8 ～ 9.99 | T | +0.01/0 or H7 | 10 | - | 1 ～ 45 | 50 ～ 350 | - | 0.1 ～ 20 | ||
| 1 | Quote | 10 | 8mm(JIS) | -0.01/-0.02 | 10 ～ 11.99 | T | +0.01/0 or H7 | 12 | - | 1 ～ 45 | 50 ～ 350 | - | 0.1 ～ 24 |
Loading...
Basic information
| Material | SKH51 | Surface treatment | No | With/without cooling hole | No |
|---|
Configure
Basic Attributes
-
Shaft diameter tolerance
- 0/-0.005
- -0.01/-0.02
-
D/P (Shaft diameter)(mm)
-
Tip shape
- C
- G
- T
- R
- B
-
Applicable ejector sleeves inner diameter tolerance
- +0.01/0 or H7
-
No. (Nominal diameter)(mm)
-
C (C chamfering width on the tip)(mm)
-
K (Taper angle)(°)
-
L (L dimension)(mm)
-
R (Tip R chamfering)(mm)
-
S (Tip tapered width)(mm)
-
Type
- CPHG-5LB
- CPHG-5LC
- CPHG-5LG
- CPHG-5LR
- CPHG-5LT
- CPHGE-5LB
- CPHGE-5LC
- CPHGE-5LG
- CPHGE-5LR
- CPHGE-5LT
- CPHJG-5LB
- CPHJG-5LC
- CPHJG-5LG
- CPHJG-5LR
- CPHJG-5LT
- CPHJGE-5LB
- CPHJGE-5LC
- CPHJGE-5LG
- CPHJGE-5LR
- CPHJGE-5LT
-
Head thickness
- 4mm(T4)
- 6mm(JIS)
- 8mm(JIS)
-
Filter by CAD data type
- 2D
- 3D
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Způsob platby
Platba na účet
Zálohová platba
Výroba na vyžádání
Certifikáty
Copyright © MISUMI Corporation Všechna práva vyhrazena.