Contour core pins / cylindrical / HSS, tool steel / L 0.01mm / conical face shape selectable / lapped (Part Numbers - CAD Download)
Click on this image to zoom in.
Click on this image to zoom in.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Material | Shaft diameter tolerance | L dimension tolerance | Tip gradient tolerance | D/P (Shaft diameter) (mm) | Step (Step shape of the first step) | Shape (Tip shape) | RE (R shape alteration・enlargement) (mm) | A (Step shape diameter) (mm) | C (Step type taper width) (mm) | CVC (Designation of C dimension in increments of 0.01mm) (mm) | F (Bearing bore length) (mm) | G (Tip C chamfering width) (mm) | K (Tip angle) (°) | L (L dimension) (mm) | Q (Tip R chamfering) (mm) | R (Step type R) (mm) | S (Tip tapered width) (mm) | V (Tip diameter) (mm) | VC (V dimension alteration, smaller than V min) (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | Quote | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 2.5 | 1E | R | - | 0.5 ～ 2.49 | - | - | 10 ～ 99 | - | - | 12 ～ 100 | 0.2 ～ 1.2 | 0.2 ～ 0.7 | - | 0.5 ～ 2.49 | - | ||
- | 1 | Quote | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 2.5 | 1E | R | 0.5 ～ 2 | 0.5 ～ 2.49 | - | - | 10 ～ 99 | - | - | 12 ～ 100 | 0.2 ～ 1.2 | - | - | 0.5 ～ 2.49 | - | ||
- | 1 | Quote | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 3 | 1E | R | - | 0.7 ～ 2.99 | - | - | 10 ～ 99 | - | - | 12 ～ 100 | 0.2 ～ 1.4 | 0.2 ～ 1 | - | 1 ～ 2.99 | - | ||
- | 1 | Quote | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 3 | 1E | R | 0.5 ～ 2 | 0.7 ～ 2.99 | - | - | 10 ～ 99 | - | - | 12 ～ 100 | 0.2 ～ 1.4 | - | - | 1 ～ 2.99 | - | ||
- | 1 | Quote | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 3.5 | 1E | R | - | 0.7 ～ 3.49 | - | - | 10 ～ 119 | - | - | 12 ～ 120 | 0.2 ～ 1.7 | 0.2 ～ 1.4 | - | 1 ～ 3.49 | - | ||
- | 1 | Quote | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 3.5 | 1E | R | 0.5 ～ 2 | 0.7 ～ 3.49 | - | - | 10 ～ 119 | - | - | 12 ～ 120 | 0.2 ～ 1.7 | - | - | 1 ～ 3.49 | - | ||
- | 1 | Quote | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 3.5 | 1E | R | - | 0.7 ～ 3.49 | - | - | 10 ～ 119 | - | - | 12 ～ 120 | 0.2 ～ 1.7 | 0.2 ～ 1.4 | - | - | 0.7 ～ 0.99 | ||
- | 1 | Quote | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 3.5 | 1E | R | 0.5 ～ 2 | 0.7 ～ 3.49 | - | - | 10 ～ 119 | - | - | 12 ～ 120 | 0.2 ～ 1.7 | - | - | - | 0.7 ～ 0.99 | ||
- | 1 | Quote | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 4 | 1E | R | - | 0.7 ～ 3.99 | - | - | 10 ～ 119 | - | - | 12 ～ 120 | 0.2 ～ 1.9 | 0.2 ～ 1.6 | - | 1 ～ 3.99 | - | ||
- | 1 | Quote | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 4 | 1E | R | 0.5 ～ 2 | 0.7 ～ 3.99 | - | - | 10 ～ 119 | - | - | 12 ～ 120 | 0.2 ～ 1.9 | - | - | 1 ～ 3.99 | - | ||
- | 1 | Quote | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 4 | 1E | R | - | 0.7 ～ 3.99 | - | - | 10 ～ 119 | - | - | 12 ～ 120 | 0.2 ～ 1.9 | 0.2 ～ 1.6 | - | - | 0.7 ～ 0.99 | ||
- | 1 | Quote | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 4 | 1E | R | 0.5 ～ 2 | 0.7 ～ 3.99 | - | - | 10 ～ 119 | - | - | 12 ～ 120 | 0.2 ～ 1.9 | - | - | - | 0.7 ～ 0.99 | ||
- | 1 | Quote | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 4.5 | 1E | R | - | 1 ～ 4.49 | - | - | 10 ～ 119 | - | - | 12 ～ 120 | 0.2 ～ 2.2 | 0.2 ～ 1.7 | - | 1 ～ 4.49 | - | ||
- | 1 | Quote | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 4.5 | 1E | R | 0.5 ～ 2 | 1 ～ 4.49 | - | - | 10 ～ 119 | - | - | 12 ～ 120 | 0.2 ～ 2.2 | - | - | 1 ～ 4.49 | - | ||
- | 1 | Quote | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 5 | 1E | R | - | 1 ～ 4.99 | - | - | 10 ～ 119 | - | - | 12 ～ 120 | 0.2 ～ 2.4 | 0.2 ～ 2 | - | 1 ～ 4.99 | - | ||
- | 1 | Quote | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 5 | 1E | R | 0.5 ～ 2 | 1 ～ 4.99 | - | - | 10 ～ 119 | - | - | 12 ～ 120 | 0.2 ～ 2.4 | - | - | 1 ～ 4.99 | - | ||
- | 1 | Quote | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 5.5 | 1E | R | - | 1 ～ 5.49 | - | - | 10 ～ 119 | - | - | 12 ～ 120 | 0.2 ～ 2.7 | 0.2 ～ 2.2 | - | 1.5 ～ 5.49 | - | ||
- | 1 | Quote | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 5.5 | 1E | R | 0.5 ～ 2 | 1 ～ 5.49 | - | - | 10 ～ 119 | - | - | 12 ～ 120 | 0.2 ～ 2.7 | - | - | 1.5 ～ 5.49 | - | ||
- | 1 | Quote | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 5.5 | 1E | R | - | 1 ～ 5.49 | - | - | 10 ～ 119 | - | - | 12 ～ 120 | 0.2 ～ 2.7 | 0.2 ～ 2.2 | - | - | 1 ～ 1.49 | ||
- | 1 | Quote | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 5.5 | 1E | R | 0.5 ～ 2 | 1 ～ 5.49 | - | - | 10 ～ 119 | - | - | 12 ～ 120 | 0.2 ～ 2.7 | - | - | - | 1 ～ 1.49 | ||
- | 1 | Quote | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 6 | 1E | R | - | 1.5 ～ 5.99 | - | - | 10 ～ 119 | - | - | 12 ～ 120 | 0.2 ～ 2.9 | 0.2 ～ 2.2 | - | 2 ～ 5.99 | - | ||
- | 1 | Quote | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 6 | 1E | R | 0.5 ～ 2 | 1.5 ～ 5.99 | - | - | 10 ～ 119 | - | - | 12 ～ 120 | 0.2 ～ 2.9 | - | - | 2 ～ 5.99 | - | ||
- | 1 | Quote | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 6 | 1E | R | - | 1.5 ～ 5.99 | - | - | 10 ～ 119 | - | - | 12 ～ 120 | 0.2 ～ 2.9 | 0.2 ～ 2.2 | - | - | 1.5 ～ 1.99 | ||
- | 1 | Quote | 10 | SKH51 | 0/-0.005 | +0.02/0 | ±0.01 | 6 | 1E | R | 0.5 ～ 2 | 1.5 ～ 5.99 | - | - | 10 ～ 119 | - | - | 12 ～ 120 | 0.2 ～ 2.9 | - | - | - | 1.5 ～ 1.99 |
Loading...
- << Previous
- 1
- 2
- 3
- 4
Basic information
| Shape type | One-step | Surface treatment | Tip lapped | Head thickness | 4mm(T4) |
|---|---|---|---|---|---|
| Step (Step shape of the second step) | No second step |
Configure
Basic Attributes
-
Material
- SKH51
- SKD61
-
Shaft diameter tolerance
- 0/-0.005
- -0.01/-0.02
-
L dimension tolerance
- +0.02/0
- 0/-0.1
-
Tip gradient tolerance
- ±0.01
- ±0.015
-
D/P (Shaft diameter)(mm)
-
Step (Step shape of the first step)
- 1A
- 1B
- 1C
- 1D
- 1E
-
RE (R shape alteration・enlargement)(mm)
-
A (Step shape diameter)(mm)
-
C (Step type taper width)(mm)
-
CVC (Designation of C dimension in increments of 0.01mm)(mm)
-
F (Bearing bore length)(mm)
-
G (Tip C chamfering width)(mm)
-
K (Tip angle)(°)
-
L (L dimension)(mm)
-
Q (Tip R chamfering)(mm)
-
R (Step type R)(mm)
-
S (Tip tapered width)(mm)
-
V (Tip diameter)(mm)
-
VC (V dimension alteration, smaller than V min)(mm)
-
Type
- L-CPD-1A
- L-CPD-1AB
- L-CPD-1AC
- L-CPD-1AG
- L-CPD-1AR
- L-CPD-1AT
- L-CPD-1B
- L-CPD-1BB
- L-CPD-1BC
- L-CPD-1BG
- L-CPD-1BR
- L-CPD-1BT
- L-CPD-1C
- L-CPD-1CB
- L-CPD-1CC
- L-CPD-1CG
- L-CPD-1CR
- L-CPD-1CT
- L-CPD-1D
- L-CPD-1DB
- L-CPD-1DC
- L-CPD-1DG
- L-CPD-1DR
- L-CPD-1DT
- L-CPD-1E
- L-CPD-1EB
- L-CPD-1EC
- L-CPD-1EG
- L-CPD-1ER
- L-CPD-1ET
- L-CPH-1A
- L-CPH-1AB
- L-CPH-1AC
- L-CPH-1AG
- L-CPH-1AR
- L-CPH-1AT
- L-CPH-1B
- L-CPH-1BB
- L-CPH-1BC
- L-CPH-1BG
- L-CPH-1BR
- L-CPH-1BT
- L-CPH-1C
- L-CPH-1CB
- L-CPH-1CC
- L-CPH-1CG
- L-CPH-1CR
- L-CPH-1CT
- L-CPH-1D
- L-CPH-1DB
- L-CPH-1DC
- L-CPH-1DG
- L-CPH-1DR
- L-CPH-1DT
- L-CPH-1E
- L-CPH-1EB
- L-CPH-1EC
- L-CPH-1EG
- L-CPH-1ER
- L-CPH-1ET
-
Shape (Tip shape)
- No processing
- C
- G
- T
- R
- B
-
Filter by CAD data type
- 2D
- 3D
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Způsob platby
Platba na účet
Zálohová platba
Výroba na vyžádání
Certifikáty
Copyright © MISUMI Corporation Všechna práva vyhrazena.