STRAIGHT EJECTOR SLEEVES / DIN ISO 8405 / EN 1.2344 Equiv. / Nitrided / ◎0.08 / L, P, V Dimensions Configurable (Part Numbers - CAD Download)
- DIN Standard
- New Product
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Specifications
Drawing / Product specification
D-ESNB
| Range of guaranteed shaft diameter precision (b1=L－x1) | |
| x1 max.40 | |
| [ ! ]Nitriding may extend to the head as it is applied after dimension V and P machining. | |
| [ ! ]When the diameter (P) portion of the stepped center pin is inserted into the relief hole (C), make sure | relief hole (C) ≧ pin diameter (P)＋1.0 |
| Type | [ M ] | [ H ] | [ T ] V | Applicable center pin shaft diameter tolerance | |
| D-ESNB | 1.2344 equivalent+Nitrided | Surface: 900HV Base Material: 40±3HRC | H7 | -0.01 -0.02 | *Note that for sleeves with V dimension tolerance of H7, combination with center pins that have shaft diameter tolerance 0-0.005 is not recommended. The reason for this is the fitting section S are longer. |
| P≦6 | 6.5≦P≦10 | 12≦P≦16 | P＝20 |
| －0.004 －0.012 | －0.005 －0.014 | －0.006 －0.017 | －0.007 －0.020 |
| V≦3.0 | 3.1≦V≦6.0 | 6.1≦V≦10.0 | V≧10.1 |
| +0.010 0 | +0.012 0 | +0.015 0 | +0.018 0 |
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
| Part Number | Minimum order quantity | Volume Discount | Head thickness | Shaft diameter tolerance | D/P (Shaft diameter) (mm) | V (Hole diameter) (mm) | L (L dimension) (mm) | C (Recess Diameter) (㎜) | S (V Hole Diameter Length) (mm) | P (Shaft Diameter) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 15 Days | 5mm | -0.005/-0.014 | 6.5 | 2 ～ 4.4 | 40 ～ 400 | 2.5 ～ 4.9 | 20 ～ 100 | 6.01 ～ 6.49 | ||
| 1 | 15 Days | 5mm | -0.005/-0.014 | 7 | 2 ～ 4.9 | 40 ～ 400 | 2.5 ～ 5.4 | 20 ～ 100 | 6.51 ～ 6.99 | ||
| 1 | 15 Days | 5mm | -0.005/-0.014 | 7.5 | 2 ～ 5.4 | 40 ～ 400 | 2.5 ～ 5.9 | 20 ～ 100 | 7.01 ～ 7.49 | ||
| 1 | 15 Days | 5mm | -0.005/-0.014 | 8 | 2.5 ～ 5.9 | 70 ～ 500 | 3 ～ 6.4 | 20 ～ 100 | 7.51 ～ 7.99 | ||
| 1 | 15 Days | 5mm | -0.005/-0.014 | 9 | 2.5 ～ 6.9 | 70 ～ 500 | 3 ～ 7.4 | 20 ～ 100 | 8.01 ～ 8.99 | ||
| 1 | 15 Days | 5mm | -0.005/-0.014 | 10 | 2.5 ～ 7.9 | 70 ～ 500 | 3 ～ 8.4 | 20 ～ 100 | 9.01 ～ 9.99 |
Loading...
Specification table
| H | T | Part No. | L | P 0.1mm increments | V 0.1mm increments | C 0.1mm increments | Cmax. | S 1mm increments | |||||
| Type | No. | 0.01mm increments | 0.1mm increments | ||||||||||
| 8 | 3 | D-ESNB (1.2344 equivalent ＋ Nitrided) | 4 | 40.00～200.00 | - | 3.50～ 3.99 | 1.5～ 1.9 | C≧V＋0.5 and C≦P－1.5 ([ ! ]When L>300 0.5mm increments) | 2.4 | 20～100 ([ ! ]No.4, No.4.5 When V1.5～V1.9 20～40) | |||
| 4.5 | 4.01～ 4.49 | 1.5～ 2.4 | 2.9 | ||||||||||
| 10 | 5 | 40.00～300.00 | 4.51～ 4.99 | 2.0～ 2.9 | 3.4 | ||||||||
| 5.5 | 5.01～ 5.49 | 2.0～ 3.4 | 3.9 | ||||||||||
| 12 | 5 | 6 | 40.00～400.00 | 5.51～ 5.99 | 2.0～ 3.9 | 4.4 | |||||||
| 6.5 | 6.01～ 6.49 | 2.0～ 4.4 | 4.9 | ||||||||||
| 7 | 6.51～ 6.99 | 2.0～ 4.9 | 5.4 | ||||||||||
| 7.5 | 7.01～ 7.49 | 2.0～ 5.4 | 5.9 | ||||||||||
| 14 | 8 | 70.00～500.00 | 7.51～ 7.99 | 2.5～ 5.9 | 6.4 | 20～100 | |||||||
| 9 | 8.01～ 8.99 | 2.5～ 6.9 | 7.4 | L | (L－S) min. | ||||||||
| 16 | 10 | 9.01～ 9.99 | 2.5～ 7.9 | 8.4 | 40.00～60.00 | 20 | |||||||
| 18 | 7 | 12 | 500.1 ～ 800.0 | 10.01～11.99 | 2.5～ 9.9 | 10.4 | 60.01～70.00 | 30 | |||||
| 22 | 15 | 12.01～14.99 | 2.5～12.0 | 12.5 | 70.01～80.00 | 40 | |||||||
| 16 | 15.01～15.99 | 2.5～13.0 | 13.5 | 80.01～ | 50 | ||||||||
| 26 | 8 | 20 | 100.00～500.00 | 16.01～19.99 | 3.0～16.0 | 16.5 | |||||||
| [ ! ]V≦P－2.0 | |||||||||||||
Order Example
| Part No. | - | L | - | P | - | V | - | C | - | S | ||
| D-ESNB 4 | - | 200 | - | P3.5 | V1.5 | - | C2.0 | - | S30 | |||
Alteration
| Part No. | - | L | - | P | - | V | - | C | - | S | - | (KC・WKC…etc.) | ||
| D-ESNB 10 | - | 300 | - | P9.1 | - | V5.5 | - | C6.2 | - | S50 | - | HC10 | ||
Basic information
| Brand | MISUMI | Product composition | Single sleeve | Material | EN 1.2344 Equiv. |
|---|---|---|---|---|---|
| Surface treatment | Nitrided | Concentricity between the hole and shaft diameters | ◎0.08 | Inner dia. tolerance | H7 |
| Tapered or not | No | Center pin tip shape | No | Technical Standard | DIN |
| Alterations | With |
Configure
Basic Attributes
-
Type
- D-ESNB
-
Head thickness
- 3mm
- 5mm
- 7mm
- 8mm
-
D/P (Shaft diameter)(mm)
-
V (Hole diameter)(mm)
-
L (L dimension)(mm)
-
C (Recess Diameter)(㎜)
-
S (V Hole Diameter Length)(mm)
-
P (Shaft Diameter)
-
Shaft diameter tolerance
- -0.04/-0.012
- -0.005/-0.014
- -0.006/-0.017
- -0.007/-0.020
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 15 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Způsob platby
Platba na účet
Zálohová platba
Výroba na vyžádání
Certifikáty
Copyright © MISUMI Corporation Všechna práva vyhrazena.