Deep groove ball bearings / single row / ZZ / stainless, EN 1.4301 equiv. / MISUMI (SUB6002ZZ)

Click on this image to zoom in.

Volume Discount

MISUMI

Product Details:

Manufacturer part number: SUB6002ZZ

Brand: MISUMI

Price: 34.38 €

Delivery time: 5 Days

Technical Data:

I.D. d: 15 φ

O.D. D: 32 φ

Width B (or T): 9 mm

Basic Load Rating Cr (Dynamic): 112 N

Allowable Rotational Speed: 1300 1/min

Order quantities extended (D-JIT)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

SUB6002ZZ

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Back to the Category Ball Bearings

Technical Drawing - Ball Bearings

EN 1.4301 Equiv. Ball Bearings:Related Image

Available dimensions and tolerances can be found under the tab More information.

Basic Properties (e.g., material, hardness, coating, tolerance) - Ball Bearings

Operating Temperature: -40 ~ +150°C
EN 1.4301 Equiv. may be slightly magnetized after machining.

Component	Material
Inner/Outer Rings, Shield, Retainer, Ball	EN 1.4301 Equiv.

For further specifications please see the More information tab.
Information on tolerances and rotational accuracy of the radial bearings can be found in the following PDF: Ball bearing table / tolerances as PDF

Composition of a Product Code - Ball Bearings

Part Number

SUB6000ZZ
3NC6000ZZST

General Information - Ball Bearings

Ball bearing - deep groove ball bearing - axial bearing - axial ball bearing - axial groove ball bearing - angular ball bearing - spherical ball bearing - tension bearing

Ball Bearing Selection Details

- Ball material: steel, stainless steel, ceramic, plastic, glass, chrome-plated

- Type of bearings: axial ball bearings, thin section bearings, spherical ball bearings, deep groove ball bearings, single-row angular ball bearings, double-row ball bearings, tension bearings, four-point bearings

- Outer ring: flat, spherical, with flange, annular groove, U-groove, V-groove

- Properties: heat-resistant, non-magnetic, corrosion-resistant, dust-proof, vacuum, high speed

- Inner diameter: 2 mm to 50 mm

- Outer diameter: 5 mm to 110 mm

Ball bearing designation (suffix):

In addition to the dimensional designation of the ball bearing, ball bearings often also have a designation for a cover disc or sealing disc. The following names are the most common names of various manufacturers that can be selected in the MISUMI online shop.

- Double-sided sealing washer: 2RSH/2RS1, 2RSR/C-2HRS, DDU/DD
- Single-sided sealing washer: RSH/RS1, RSR/C-HRS, DU
- Double-sided sealing washer with low friction: 2RSL/2RZ/VV
- Double-sided cover disc: 2Z/ZZ, 2ZR/C-2Z
- Single sided cover disc: Z, ZR/C-Z/Z

Description/Basics

Rolling bearings

Rolling bearings are generally divided into ball bearings and roller bearings. Ball bearings are a popular type of rolling bearings due to their high permissible speed and low friction.
In the MISUMI online shop, you can purchase ball bearings that can be customized to your applications and environmental conditions. Our ball bearings are available in different materials and in a combination of different materials (hybrid bearings). In addition, MISUMI offers ball bearings already integrated into the housing as bearing housing.

Grooved ball bearings

Grooved ball bearings are the most commonly used rotary rolling bearings. This type of ball bearing is ideally suited for supporting rotating machine elements. A grooved ball bearings are intended for load bearing of radial forces and light axial forces. Grooved ball bearings are designed for high speeds and are used in a wide variety of industrial applications and designs. MISUMI already offers ball bearings integrated into housings and holders as bearing housings.

Areas of Application

Ball bearing - chemical resistance

Chemical resistance		Plastic ball			Metal ball		Ceramic ball
Bearing rings		UHMW	PEEK	PTFE	EN 1.4125 equivalent	EN 1.4301 equivalent	EN 1.4125 equivalent	EN 1.4542 equivalent
Cover plate		-	-	-	EN 1.4301 equivalent	EN 1.4301 equivalent	EN 1.4301 equivalent	EN 1.4301 equivalent
Bearing balls		Glass	Ceramic (aluminum oxide)	Ceramic (aluminum oxide)	EN 1.4125 equivalent	EN 1.4301 equivalent	Ceramic	Ceramic
Ball cage		UHMW	PEEK	PTFE	EN 1.4301 equivalent	EN 1.4301 equivalent	Fluoroplastic	Fluoroplastic
Acids	Hydrochloric acid	suitable to a limited extent	good	very good	unsuitable	good	suitable to a limited extent	good
	Sulfuric acid	suitable to a limited extent	good	very good	unsuitable	very good	good	very good
	Nitric acid	suitable to a limited extent	good	very good	unsuitable	very good	good	very good
Bases		unsuitable	very good	very good	unsuitable	very good	good	very good
Solvents		very good	very good	very good	unsuitable	very good	good	very good
Salt water		very good	very good	very good	unsuitable	very good	good	very good
Water		very good	very good	very good	unsuitable	very good	very good	very good

Comparison Table The ball bearing comparison table is provided for comparison purposes only (consider the lubricant and the sealing washer separately).

Ball bearing materials

In the MISUMI online shop, ball bearings are available in cost-effective rolling bearing steel, corrosion-resistant stainless steel and stainless steel. Furthermore, our product range includes various hybrid bearings in the following combinations: metal & ceramic, plastic & ceramic, plastic & glass.

Our various materials offer good resistance to various environmental influences. Our ball bearing shop includes the ball materials stainless steel, steel, UHMW, PEEK, PTFE, ceramic and glass.

Instructions for Use / Installation Information - Ball Bearings

Installation Information

An incorrect assembly and disassembly can damage a ball bearing. Therefore, a suitable tool must always be used to assemble and disassemble ball bearings or roller bearings.
Ball bearings should not be assembled with a hammer, as this can deform the ball bearing. It is recommended using a suitable press. During pressing, the contact surface can be provided with lubricant to protect the surfaces and facilitate assembly.
It is best to use a bearing puller for disassembly.

Maintenance

The ball bearing in roller bearings should be inspected for damage during maintenance.
Before regreasing, a ball bearing should first be thoroughly cleaned.
Remaining contamination in the bearing can damage the ball bearing. As a rule, a ball bearing should not be completely filled with grease, as this can cause the bearing to heat up too much and can cause it to fail.
For encapsulated and sealed ball bearings, it is recommended to replace the bearing. Maintenance is not recommended due to the risk of damage to the cover place or seal.

Supplementary Article

Bearing Lock Nuts

Shaft nuts - lock nuts - steel shaft nut - stainless steel shaft nut - shaft with retaining nut - shaftnNut with clamp screw - shaft nut with grub screw - shaft assembly

Bearings with Housing

Bearing with housing - bearing housing - bearing units - ball bearing holder - ball bearing with housing - bearing housing with flange - shaft holder with ball bearing

Axles / Rotary Shafts

Rotary axis - offset rotary shaft - double offset shaft - female threaded shaft - keyway shaft

Drive shafts

Motor shaft - torsion shaft - shaft with collar - shaft with shoulder - offset shaft - keyway shaft

Plain Bearing (Bushes)

Plain bearing - maintenance free - plain bearing bushings - plain bearing bushing with collar - plain bearing bushing with flange - plastic bushing - plastic plain bearing bushing

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
SUB6002ZZ

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	I.D. d (φ)	O.D. D (φ)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Allowable Rotational Speed (1/min)	Basic Load Rating Cor (Static) (N)
	34.38 €	1	Available	5 Days	10	15	32	9	112	1300	85

Back to the Category Ball Bearings

Technical Drawing - Ball Bearings

Specification Tables - Ball Bearings

Part Number	d		D		B		r (min)	Basic Load Rating		Allowable Rotational Speed rpm (Reference)	Relative Dimensions				Mass (g) (Reference)	Unit Price
		Tolerance		Tolerance		Tolerance		Cr (Dynamic) N	Cor (Static) N		Ds		dh (max)	R (max)
		Tolerance		Tolerance		Tolerance		Cr (Dynamic) N	Cor (Static) N		(min)	(max)	dh (max)	R (max)
SUB626ZZ	6	+0.05 0	19	0 -0.03	6	0 -0.12	0.3	52	32	2100	8	10	17	0.3	8.2
SUB608ZZ	8		22		7			66	41	2000	10	11.5	20		12
SUB628ZZ	8		24		8			67	42	1900	10	12	22		18
SUB6000ZZ	10		26		8			91	59	1800	12	13.5	24		19
SUB6200ZZ	10		30		9		0.6	102	72	1500	14	16	26	0.6	32
SUB6001ZZ	12		28		8		0.3	102	72		14	16	26	0.3	21
SUB6201ZZ	12		32	0 -0.035	10		0.6	136	92		16	17	28	0.6	37
SUB6002ZZ	15		32		9		0.3	112	85	1300	17	19	30		30
SUB6202ZZ	15		35		11		0.6	153	113	1300	19	20	31		46
SUB6003ZZ	17		35		10		0.3	120	98	1200	19	21	33		41
SUB6203ZZ	17		40		12		0.6	192	144	1100	21	22	36		66
SUB6004ZZ	20		42		12		0.6	188	152	1000	24	25	38		68
SUB6204ZZ	20		47		14		1.0	256	200	900	25	27	42	1.0	105

kgf=Nx0.101972

More Information

Performance Comparison of Bearings for Special Environment

Part Number

Inner/Outer Rings

Shield

Rolling Element

Retainer

Low Dust Generation

Abrasion Resistance

Corrosion Resistance and Chemical Resistance

Heat Resistance

Vacuum

Insulation

Non-magnetic

Heavy Load

High Rotational Speed

Acid

Alkali

Solvent

Seawater

Water

Hydrochloric Acid

Sulfuric Acid

Nitric Acid

SE6□□□ZZPR

EN 1.4125 Equiv.
Special Fluoro-Macromolecule Coating

EN 1.4301 Equiv.

EN 1.4125 Equiv.
Special Fluoro-Macromolecule Coating

EN 1.4301 Equiv.
Special Fluoro-Macromolecule Coating

◎

◎
(-100~200°C)

◎

△

3NC6□□□ZZST

EN 1.4125 Equiv.

EN 1.4301 Equiv.

Ceramics

Fluororesin

○

△

○

◎

◎
(-100~200°C)

◎

3NC6□□□ZZMD

EN 1.4542 Equiv.

EN 1.4301 Equiv.

Ceramics

Fluororesin

○

◎

◎
(-100~200°C)

◎

△

SUB6□□□ZZ

EN 1.4301 Equiv.

△

○

◎

○
(-40~150°C)

○

The service life may be shortened drastically when used in conditions where the product is soaked in corrosive solution.
(◎Well Suited ○Good △Questionable ×Not Suitable)

Products homepage

Basic information

Bearing Ring Shape	Ball	Materials of Inner and Outer Ring	EN 1.4301 Equiv.	Shield material and shape	Double Shielded
Outer Ring Type	Flat	Accuracy (JIS)	Class 0	Specifications/Environment	Standard / Heat Resistance / Water Resistance / Non-magnetic
Load Direction	Radial	Number of Bearing Ring Rows	Single Track	Size Standard	Metric Series
Rolling Element Material	EN 1.4301 Equiv.	Seal Part Structure	Double Shielded

This page is Deep groove ball bearings / single row / ZZ / stainless, EN 1.4301 equiv. / MISUMI, part number SUB6002ZZ.
You can find the detail information about specifications and dimensions on part number SUB6002ZZ.

Configure

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Type
- SUB6000ZZ
- SUB6001ZZ
- SUB6002ZZ
- SUB6003ZZ
- SUB6004ZZ
- SUB608ZZ
- SUB6200ZZ
- SUB6201ZZ
- SUB6202ZZ
- SUB6203ZZ
- SUB6204ZZ
- SUB626ZZ
- SUB628ZZ
Clear
I.D. d(φ)
6

8

10

12

15

17

20
Clear
O.D. D(φ)
19

22

24

26

28

30

32

35

40

42

47
Clear
Width B (or T)(mm)
6

7

8

9

10

11

12

14
Clear
Basic Load Rating Cr (Dynamic)(N)
52

66

67

91

102

112

120

136

153

188

192

256
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

Same day

5 Days or Less

7 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Variation of this product

Part Number
SUB6000ZZ
SUB6001ZZ
SUB6003ZZ
SUB6004ZZ
SUB608ZZ
SUB6200ZZ

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	I.D. d (φ)	O.D. D (φ)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Allowable Rotational Speed (1/min)	Basic Load Rating Cor (Static) (N)
30.60 €	1	Available	Same day Stock	10	10	26	8	91	1800	59
31.35 €	1	Available	5 Days	10	12	28	8	102	1500	72
37.40 €	1	Available	5 Days	10	17	35	10	120	1200	98
41.68 €	1	Available	5 Days	10	20	42	12	188	1000	152
32.62 €	1	Available	7 Days	10	8	22	7	66	2000	41
31.99 €	1	Available	5 Days	10	10	30	9	102	1500	72