Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!
Potvrzeno
- Hole Machining
- Thickness T Dimension(mm)
- 5
- Extra Low Head Counterbored Hole Nominal Dia. [ZN]
- 4
- L(mm)[930–1200/1mm jednotek]
- Number of Holes [H](pc(s).)
- 4
- P(mm)[20–323/1mm jednotek]
- W(mm)
- 15
- Type
- CAD
- 2D
- 3D
- Odhadované dodací dny
- Vše
- V rámci 7 pracovních dnů
Další možnosti
- Left Side Corner Cut (End Side Faces) [LCC](mm)
- 10
- Right Side Corner Cut (End Side Faces) [RCC](mm)
- 5
- 10
UHMW Guide Rails (NLBB5-15-1000-H4-P300-ZN4-LCC10)
Pozor
- Please check the content on our website as the PDF does not contain the most up-to-date information.
- Jednotková cena (bez DPH)
- 51.64 €
- Celkem (bez DPH)
- 51.64 €Cena včetně DPH: 61.45 €
- Datum odeslání
- 9 pracovních dnůReferenční datum odeslání: 26.06.2025
| Množství | 1 - 19 | 20 - 50 | 51+ |
|---|---|---|---|
| Jednotková cena (bez DPH) (Jednotková cena včetně DPH) | 51.64 € (61.45 €) | 44.47 € (52.92 €) | 44.47 € (52.92 €) |
| Shipping days | 9 days | 9 days | Quote |
- * Informace o dnech dodání, přepravních nákladech a cenách
Obrysový výkres a tabulka specifikací
NLBA No Hole Type
NLBB Counterbored Type
NLBBF Counterbored, Hole Position Configurable
[!] Thermal Expansion Coefficient: 1.7 × 10⁻⁴/°C
[M]Material: Ultra High-Molecular-Weight Polyethylene
| * Hole Machining Details | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Specification Table
| Part Number | — | W | — | L | — | H | — | P | — | G | — | Screw Nominal Dia. |
| NLBA5 NLBB8 NLBBF10 | — — — | 25 20 25 | — — — | 1200 500 1100 | — — | H4 H4 | — — | P115 P115 | — | G12 | — — | Z5 Z5 |
■No Hole Type
| Part Number | W Selection | L 1 mm Increments | |||||||
| Type | T | ||||||||
| NLBA | 3 | 10 | 15 | 20 | 25 | 100 to 1800 | |||
| 5 | 15 | 20 | 25 | 30 | 35 | ||||
| 8 | 20 | 25 | 30 | 35 | 40 | ||||
| 10 | 20 | 25 | 30 | 35 | 40 | ||||
| 15 | 25 | 30 | 35 | 40 | |||||
| 20 | 30 | 35 | 40 | ||||||
■ Counterbored Hole
[ ! ] (L - P (H−1)) /2 ≥ d1/2 + 2
| Part Number | W Selection | L 1 mm Increments | H (Holes) | P 1 mm Increments | Screw Hole Nominal Diameter Configurable | ||||||||||||||
| Type | T | Z | ZN | ||||||||||||||||
| NLBB | 3 | 10 | 15 | 20 | 25 | 100 to 1200 | 2 to 10 | P ≥ 20 | — | 4 | |||||||||
| 5 | 15 | 20 | 25 | 30 | 35 | — | 4 | 5 | 6 | ||||||||||
| 8 | 20 | 25 | 30 | 35 | 40 | 3 | 4 | 5 | 4 | 5 | 6 | ||||||||
| 10 | 20 | 25 | 30 | 35 | 40 | 4 | 5 | 6 | 5 | 6 | |||||||||
| 15 | 25 | 30 | 35 | 40 | 4 | 5 | 6 | 8 | — | ||||||||||
| 20 | 30 | 35 | 40 | 4 | 5 | 6 | 8 | — | |||||||||||
■With Counterbored Holes, Hole Position Configurable
[ ! ] (L - P (H−1)) /2 ≥ d1/2 + 2
| Part Number | W Selection | L 1 mm Increments | H (Holes) | P 1 mm Increments | G 1 mm Increments | Screw Hole Nominal Diameter Configurable | |||||||||||||
| Type | T | Z | ZN | ||||||||||||||||
| NLBBF | 3 | 15 | 20 | 25 | 100 to 1200 | 2 to 10 | P ≥ 20 | 7 to 20 d1/2 + 1 ≤ G ≤ W/2 | — | 4 | |||||||||
| 5 | 15 | 20 | 25 | 30 | 35 | — | 4 | 5 | 6 | ||||||||||
| 8 | 20 | 25 | 30 | 35 | 40 | 3 | 4 | 5 | 4 | 5 | 6 | ||||||||
| 10 | 20 | 25 | 30 | 35 | 40 | 4 | 5 | 6 | 5 | 6 | |||||||||
| 15 | 25 | 30 | 35 | 40 | 4 | 5 | 6 | 8 | — | ||||||||||
| 20 | 30 | 35 | 40 | 4 | 5 | 6 | 8 | — | |||||||||||
■Features of UHMW
(1) Abrasion Resistance: Approx. 6x of Fluorinated Resin.
Approx. 5x of Nylon Resin.
Approx. 6x of Polyurethane.
(2) Self-lubricaty: Tribological property is the same as that of fluororesin.
(3) Non-toxic: Passed standard test No. 20 of Health and Welfare Ministry.
■Characteristic Values (Reference Values)
(1) Abrasion Resistance: Approx. 6x of Fluorinated Resin.
Approx. 5x of Nylon Resin.
Approx. 6x of Polyurethane.
(2) Self-lubricaty: Tribological property is the same as that of fluororesin.
(3) Non-toxic: Passed standard test No. 20 of Health and Welfare Ministry.
■Characteristic Values (Reference Values)
| Item | Unit | Ultrahigh molecular weight polyethylene | Nylon 6 | Fluororesin |
| Specific Gravity | — | 0.94 | 1.08 | 2.2 |
| Tensile Strength | MPa | 44 | 64 | 25 |
| Tensile Elongation | % | 450 | 210 | 300 |
| Hardness | Rockwell R Scale | 40 | 95 | 32 |
| Impact Strength | Izod Notch kJ/m | > 137 | 13 | 16 |
| Thermal Expansion Coefficient | 10−4/°C | 1.7 | 0.8 | 1.0 |
| Heat Resistance Temperature | °C | 80 | 80 to 120 | 260 to 278 |
| Water Absorption Ratio | % | < 0.01 | 1.5 | < 0.01 |
| Dielectric Constant | — | 2.3 | 4.0 | 2.1 |
| Breakdown Voltage | kV/mm | 50 | 20 | 20 |
| Strong Acid Resistance | — | ◎ | × | ◎ |
| Alkali Resistance | — | ◎ | ○ | ◎ |
| Organic Solvent Resistance | — | ◎ | ○ | ◎ |
Alterations
| Alterations Code | Description | Applicable Conditions | Ordering Example | |
| TCC |  | Corner Cut (End Upper Face) Selection: TCC5·TCC10 | [ ! ] TCC < F - d1/2 - 2 | NLBB8-20-500-H4-P115-Z5-TCC5 |
| LCC RCC |  | Corner Cut (End Side Faces) LCC: Left Side, RCC: Right Side Selection: LCC5·LCC10, RCC5·RCC10 | [ ! ] LCC (RCC) < F - d1/2 | NLBBF15-30-1000-H4-P110-G7-Z5-LCC5 |
Podrobné údaje
Základní informace
[Features] It is a rail for which the hole position can be fixed. [Material] It is resin.
Pozor
- Please check the content on our website as the PDF does not contain the most up-to-date information.
Podobné produktyZobrazit všechny podobné produkty
Pro tento produkt nebyly nalezeny žádné podobné produkty. Číslo dílu bylo potvrzeno