Spacer Washers / Flange / Steel, Stainless Steel / Treatment Selectable / 45-55 HRC (Part Numbers - CAD Download)

Click on this image to zoom in.

MISUMI

Order quantities extended (D-JIT)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog

Standard Grade

Precision Grade

[ ! ] Circumference chamfering C0.5 or less

Part Number		[M] Material	[S] Surface Treatment	[ H ]Hardness
Standard Grade	Precision Grade	[M] Material	[S] Surface Treatment	[ H ]Hardness
FTCSS	—	Steel for general structure	—	—
FTCC	FTCMC	EN 1.1191 Equiv.	—	—
FTCB	FTCMB		Black Oxide
FTCM	FTCMM		Electroless Nickel Plating
FTCR	FTCMR		Low Temp. Black Chrome Plating
FTCAA	—	2000 Series Aluminum Alloy	Clear Anodize	—
FTCAB	—	2000 Series Aluminum Alloy	Black Anodize	—
FTCBBB	—	EN CW614N Equiv.	—	—
FTCSU	—	EN 1.4301 Equiv.	—	—
FTCSUR	—	EN 1.4301 Equiv.	Low Temp. Black Chrome Plating	—
FTCSK	—	EN 1.2510 Equiv.	—	55HRC or more
FTCSKB			Black Oxide
FTCSKM			Electroless Nickel Plating
FTCSUS	—	EN 1.4401 Equiv.	—	—
FTCS	FTCMS	EN 1.4125 Equiv.	—	45 to 50HRC

[ ! ] Stainless steel hardened type (FTCS, FTCMS) may be discolored by hardening.
[ ! ] I.D. part of low temp. black chrome plating may have a thinner coating or partially untreated.

Specification Table

Part Number	—	D	—	H	—	V	—	T	—	L
FTCMS	—	D25	—	H30	—	V8.0	—	T2.0	—	L5.0

■Standard Grade

Part Number

V
0.5 mm Increments
(V Dimension 3 or More)

T
0.1 mm Increments

L
0.1 mm Increments

Standard Grade
FTCSS
FTCC
FTCB
FTCM
FTCR
FTCAA
FTCAB
FTCBBB
FTCSU
FTCSUR
FTCSK
FTCSKB
FTCSKM
FTCSUS
FTCS

5.0 to 9.0
(0.5 mm Increments)

7.0 to 12.0
(0.5 mm Increments)

(Selection)
2
2.6

(0.5 mm Increments)
3.0 to 58.0

1.0 to 8.0

2.0 to 10.0

9.5 to 20.0
(0.5 mm Increments)

11.5 to 25.0
(0.5 mm Increments)

21 to 30
(1 mm increments)

23 to 40
(1 mm increments)

31 to 40
(1 mm increments)

33 to 50
(1 mm increments)

41 to 50
(1 mm increments)

43 to 60
(1 mm increments)

51 to 60
(1 mm increments)

53 to 70
(1 mm increments)

[ ! ] Machining conditions [ ! ] T ≤ L−1

[ ! ] Machining conditions of material SKS3 equivalent (FTCSK, FTCSKB, FTCSKM) [ ! ] 2 ≤ T ≤ L−2

For 5 to 20

D+2 ≤ H ≤ D × 1.5

V ≤ D−2

For 5 to 10

D+2 ≤ H ≤ D × 1.4

V ≤ D−2

For 21 to 40

D+2 ≤ H ≤ D × 1.4

V ≤ D−4

For 10.5 to 30

V ≤ D−4

For 41 to 60

D+2 ≤ H ≤ D × 1.2

V ≤ D−6

For 31 to 60

D+2 ≤ H ≤ D × 1.2

V ≤ D−6

■Precision Grade

Part Number

V
0.5 mm Increments
(V Dimension 3 or More)

T
0.1 mm Increments

L
0.1 mm Increments

Precision Grade
FTCMC
FTCMB
FTCMM
FTCMR
FTCMS

5.0 to 9.0
(0.5 mm Increments)

7.0 to 12.0
(0.5 mm Increments)

(Selection)
2
2.6

(0.5 mm Increments)
3.0 to 58.0

1.0 to 8.0

2.0 to 10.0

9.5 to 20.0
(0.5 mm Increments)

11.5 to 25.0
(0.5 mm Increments)

21 to 30
(1 mm increments)

23 to 40
(1 mm increments)

31 to 40
(1 mm increments)

33 to 50
(1 mm increments)

41 to 50
(1 mm increments)

43 to 60
(1 mm increments)

51 to 60
(1 mm increments)

53 to 70
(1 mm increments)

[ ! ] Machining conditions [ ! ] T ≤ L−1

[ ! ] Machining conditions of material SKS3 equivalent (FTCSK, FTCSKB, FTCSKM) [ ! ] 2 ≤ T ≤ L−2

For 5 to 20

D+2 ≤ H ≤ D × 1.5

V ≤ D−2

For 5 to 10

D+2 ≤ H ≤ D × 1.4

V ≤ D−2

For 21 to 40

D+2 ≤ H ≤ D × 1.4

V ≤ D−4

For 10.5 to 30

V ≤ D−4

For 41 to 60

D+2 ≤ H ≤ D × 1.2

V ≤ D−6

For 31 to 60

D+2 ≤ H ≤ D × 1.2

V ≤ D−6

Alterations

Part Number

—

(TCB·TCC·TCD·TCE·TSA·TSB·TSC·TSD·TSE·VKC·DKC·HKC)

FTCMM

—

D25

—

H30

—

V8.0

—

T2.0

—

L5.0

—

　　　　　　　　　　　　　　　　　　TSC − VKC

[ ! ] When both I.D./O.D. tolerance changes are specified, the concentricity is ø0.02.
[NG] Not applicable to anodized products. [NG] Not applicable to hardened type (products with hardness indications [H]).

Alterations

Code

Spec.

Alterations

Code

Spec.

I.D. Tolerance

VKC

Changes the I.D. Tolerance to H7.
Ordering Code VKC
Machining conditions
[ ! ]D ≥ 6 V ≥ 3

D	D－V
6 to 10	D－V ≥ 2
10.5 to 20	D－V ≥ 3
21 to 30	D－V ≥ 6
31 to 40	D－V ≥ 8
41 to 50	D－V ≥ 10
51 to 60	D－V ≥ 12

O.D. Tolerance

DKC
(g6)
HKC
(h7)

Changes the O.D. tolerance to g6
or h7.
Ordering code DKC, HKC
Machining conditions
[ ! ] When D ≥ 43, T ≥ 1.5
[ ! ]D ≥ 6

D	D－V
6 to 10	D－V ≥ 2
10.5 to 20	D－V ≥ 3
21 to 30	D－V ≥ 6
31 to 40	D－V ≥ 8
41 to 50	D－V ≥ 10
51 to 60	D－V ≥ 12

[NG] Not applicable to anodized products. [NG] Not applicable to hardened type (products with hardness indications [H]).

Alterations		Negative Tolerance	Positive Tolerance	Zero, Negative Tolerance	Zero, Positive Tolerance
Standard Grade T Tolerance	Code	TCB	TCC	TCD	TCE
Standard Grade T Tolerance	[ ! ] Applicable to standard grade	Changes shoulder thickness tolerance (T) T －0.1－0.3 Ordering code TCB	Changes shoulder thickness tolerance (T) T +0.3+0.1 Ordering code TCC	Changes shoulder thickness tolerance (T) T 0－0.2 Ordering code TCD	Changes shoulder thickness tolerance (T) T +0.2 0 Ordering code TCE

Alterations		Shoulder Thickness Tolerance	Negative Tolerance	Positive Tolerance	Zero, Negative Tolerance	Zero, Positive Tolerance
Precision Grade T Tolerance	Code	TSA	TSB	TSC	TSD	TSE
Precision Grade T Tolerance	[ ! ] Applicable to precision grade	Changes shoulder thickness tolerance (T) T ±0.025 Ordering code TSA	Changes shoulder thickness tolerance (T) T －0.01－0.06 Ordering code TSB	Changes shoulder thickness tolerance (T) T +0.06+0.01 Ordering code TSC	Changes shoulder thickness tolerance (T) T 0－0.05 Ordering code TSD	Changes shoulder thickness tolerance (T) T +0.05 0 Ordering code TSE

General Information - Washers/Collars (metal)

Selection Details of Discs and Sleeves

- Material: steel, stainless steel, aluminum, brass, tool steel
- Coating: untreated, burnished, nickel-plated, LTBC coating, anodized, chrome-plated
- Basic shapes: straight, with collar, sleeve, disc, front panel with open oblong hole
- Designs: through hole, two through holes, bolt circle, oblong hole, counterbore, conical counterbore, internal thread
- Hardness: up to ~55HRC
- ISO tolerances: g6, h7
- Inner diameter: 0 mm to 90 mm
- Outer diameter: 3 mm to 100 mm
- Length: 1 mm to 200 mm

Overview of the various designs as PDF

Description/Basics

A spacer sleeve or distance washer serves as a spacer in mechanical engineering to maintain a predetermined position. Unlike the known washers, spacer sleeves and distance washers are not punched. Spacer sleeves, which are also known as spacer sleeves, have a precise length. Their length tolerance (precision class) is up to +/- 0.01 mm. A spacer sleeve can therefore also be used as a bearing sleeve of rolling bearings.
These metal sleeves and discs are available at MISUMI either unhardened or hardened. Particularly hard discs and sleeves have a high level of wear resistance. Stainless steel sleeves and stainless steel washers are well protected against oxidation in corrosive environments. Spacer sleeves or distance sleeves can be configured with collar (flange). The height of the government is also tolerated and can also be used for maintaining a distance.

Due to the individual configuration of the distance sleeve and spacer washer, they offer nearly an unlimited use in mechanical engineering.

Areas of Application

The spacer sleeve or distance washer is suitable for many mechanical engineering applications due to its tolerable height. Compared to the commercially available washer, the distance washer can have a larger bearing surface. The special form as a countersunk washer is well suited for shaft mounting at the shaft end.
The precisely manufactured spacer sleeve is suitable for precisely maintaining a distance between two components. If several sleeves are necessary for this, MISUMI offers simultaneous grinding spacer sleeves. Due to the matched length of the grinding distance sleeves, which are used as a set (min. 2 pieces), a flat surface can be formed. In addition, the simultaneously ground sleeves can reduce play, because the height difference from one another is limited to +/- 5μ.
Alternatively, the metal disc or the metal collar can be suitable as a spring disk in order to serve a pressure spring as a receiver or stopper.

At MISUMI, you can configure the distance washer and distance sleeve to your specifications and order it online. The additionally selectable options extend the design freedom of the metal collars and metal discs.

Materials

Metal collars and metal discs in steel, tool steel and stainless steel are available in the MISUMI online shop. Stainless steel sleeves and washers provide good corrosion resistance and can be used in corrosive environments.

Alternatively, MISUMI offers discs and sleeves made of plastic and ceramic as well as thermally insulating materials for special environmental influences.
In addition, MISUMI offers discs and sleeves made of rubber and felt, which can work with diverse properties, e.g., antistatic and vibration damping.

Coatings

MISUMI sleeves and discs are available uncoated, burnished, nickel-plated, LTBC-coated, anodized and chrome-plated versions to protect metal sleeves and metal washers from corrosion and wear.

Dimensions

Overview of the geometric variants as PDF

Standard class and precision class of the spacer sleeve

(1) Spacer sleeve – standard class, (2) spacer sleeve – precision class

Standard class and precision class of the spacer disc

(1) Spacer washer – standard class, (2) spacer washer – precision class

Application Examples - Washers/Collars (metal)

(1) Plate, (2) spacer washer, (3) screw – hexagon socket

(1) Screw, (2) metal washer, (3) metal collar, (4) natural rubber plate

(1) Spacer sleeve, (2) ball bearing, (3) rotary shaft

(1) Distance sleeve/spacer sleeve

Supplementary Article

Ball bearing

Shims

Washers / Collars (Non-Metal, Plastic)

Washers / Collars (Urethane, Rubber, Sponge, Felt)

Shoulder bolts

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
FTCAA-D[5-20/0.5]-H[7-25/0.5]-V[2,2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCAA-D[5-20/0.5]-H[7-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCAA-D[5-20/0.5]-H[23-70/1]-V[2,2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCAA-D[5-20/0.5]-H[23-70/1]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCAA-D[21-60/1]-H[7-25/0.5]-V[2,2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCAA-D[21-60/1]-H[7-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCAA-D[21-60/1]-H[23-70/1]-V[2,2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCAA-D[21-60/1]-H[23-70/1]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCAB-D[5-20/0.5]-H[7-25/0.5]-V[2,2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCAB-D[5-20/0.5]-H[7-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCAB-D[5-20/0.5]-H[23-70/1]-V[2,2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCAB-D[5-20/0.5]-H[23-70/1]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCAB-D[21-60/1]-H[7-25/0.5]-V[2,2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCAB-D[21-60/1]-H[7-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCAB-D[21-60/1]-H[23-70/1]-V[2,2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCAB-D[21-60/1]-H[23-70/1]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D5.0-H[7-12/0.5]-V[2,2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D5.0-H[7-12/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D5.5-H[7-12/0.5]-V[2,2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D5.5-H[7-12/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D6.0-H[7-12/0.5]-V[2,2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D6.0-H[7-12/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D6.5-H[7-12/0.5]-V[2,2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D6.5-H[7-12/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D7.0-H[7-12/0.5]-V[2,2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D7.0-H[7-12/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D7.5-H[7-12/0.5]-V[2,2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D7.5-H[7-12/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D8.0-H[7-12/0.5]-V[2,2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D8.0-H[7-12/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D8.5-H[7-12/0.5]-V[2,2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D8.5-H[7-12/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D9.0-H[7-12/0.5]-V[2,2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D9.0-H[7-12/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D9.5-H[11.5-25/0.5]-V[2,2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D9.5-H[11.5-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D10-H[11.5-25/0.5]-V[2,2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D10-H[11.5-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D10.5-H[11.5-25/0.5]-V[2,2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D10.5-H[11.5-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D11-H[11.5-25/0.5]-V[2,2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D11-H[11.5-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D11.5-H[11.5-25/0.5]-V[2,2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D11.5-H[11.5-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D12-H[11.5-25/0.5]-V[2,2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D12-H[11.5-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D12.5-H[11.5-25/0.5]-V[2,2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D12.5-H[11.5-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D13-H[11.5-25/0.5]-V[2,2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D13-H[11.5-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D13.5-H[11.5-25/0.5]-V[2,2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D13.5-H[11.5-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D14-H[11.5-25/0.5]-V[2,2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D14-H[11.5-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D14.5-H[11.5-25/0.5]-V[2,2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D14.5-H[11.5-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D15-H[11.5-25/0.5]-V[2,2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D15-H[11.5-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D15.5-H[11.5-25/0.5]-V[2,2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D15.5-H[11.5-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Features, Areas of Application	O.D. D (mm)	I.D. (mm)	Thickness/Length (mm)	Material	Surface Treatment	Thickness/Length Tolerance	Hardness (HRC)	Precision	Shoulder Dia. H (mm)	Shoulder Thickness T (mm)
-	1	9 Days	-	Non-magnetic	5 ～ 20	2 ～ 2.6	2 ～ 10	[Aluminum] 2000 Series Aluminum Alloy	Anodize (Clear)	-	Unhardened	Standard Grade	7 ～ 25	1 ～ 8
-	1	9 Days	-	Non-magnetic	5 ～ 20	3 ～ 58	2 ～ 10	[Aluminum] 2000 Series Aluminum Alloy	Anodize (Clear)	-	Unhardened	Standard Grade	7 ～ 25	1 ～ 8
-	1	9 Days	-	Non-magnetic	5 ～ 20	2 ～ 2.6	2 ～ 10	[Aluminum] 2000 Series Aluminum Alloy	Anodize (Clear)	-	Unhardened	Standard Grade	23 ～ 70	1 ～ 8
-	1	9 Days	-	Non-magnetic	5 ～ 20	3 ～ 58	2 ～ 10	[Aluminum] 2000 Series Aluminum Alloy	Anodize (Clear)	-	Unhardened	Standard Grade	23 ～ 70	1 ～ 8
-	1	9 Days	-	Non-magnetic	21 ～ 60	2 ～ 2.6	2 ～ 10	[Aluminum] 2000 Series Aluminum Alloy	Anodize (Clear)	-	Unhardened	Standard Grade	7 ～ 25	1 ～ 8
-	1	9 Days	-	Non-magnetic	21 ～ 60	3 ～ 58	2 ～ 10	[Aluminum] 2000 Series Aluminum Alloy	Anodize (Clear)	-	Unhardened	Standard Grade	7 ～ 25	1 ～ 8
-	1	9 Days	-	Non-magnetic	21 ～ 60	2 ～ 2.6	2 ～ 10	[Aluminum] 2000 Series Aluminum Alloy	Anodize (Clear)	-	Unhardened	Standard Grade	23 ～ 70	1 ～ 8
-	1	9 Days	-	Non-magnetic	21 ～ 60	3 ～ 58	2 ～ 10	[Aluminum] 2000 Series Aluminum Alloy	Anodize (Clear)	-	Unhardened	Standard Grade	23 ～ 70	1 ～ 8
-	1	9 Days	-	Non-magnetic / Anti-Reflection	5 ～ 20	2 ～ 2.6	2 ～ 10	[Aluminum] 2000 Series Aluminum Alloy	Anodize (Black)	-	Unhardened	Standard Grade	7 ～ 25	1 ～ 8
-	1	9 Days	-	Non-magnetic / Anti-Reflection	5 ～ 20	3 ～ 58	2 ～ 10	[Aluminum] 2000 Series Aluminum Alloy	Anodize (Black)	-	Unhardened	Standard Grade	7 ～ 25	1 ～ 8
-	1	9 Days	-	Non-magnetic / Anti-Reflection	5 ～ 20	2 ～ 2.6	2 ～ 10	[Aluminum] 2000 Series Aluminum Alloy	Anodize (Black)	-	Unhardened	Standard Grade	23 ～ 70	1 ～ 8
-	1	9 Days	-	Non-magnetic / Anti-Reflection	5 ～ 20	3 ～ 58	2 ～ 10	[Aluminum] 2000 Series Aluminum Alloy	Anodize (Black)	-	Unhardened	Standard Grade	23 ～ 70	1 ～ 8
-	1	9 Days	-	Non-magnetic / Anti-Reflection	21 ～ 60	2 ～ 2.6	2 ～ 10	[Aluminum] 2000 Series Aluminum Alloy	Anodize (Black)	-	Unhardened	Standard Grade	7 ～ 25	1 ～ 8
-	1	9 Days	-	Non-magnetic / Anti-Reflection	21 ～ 60	3 ～ 58	2 ～ 10	[Aluminum] 2000 Series Aluminum Alloy	Anodize (Black)	-	Unhardened	Standard Grade	7 ～ 25	1 ～ 8
-	1	9 Days	-	Non-magnetic / Anti-Reflection	21 ～ 60	2 ～ 2.6	2 ～ 10	[Aluminum] 2000 Series Aluminum Alloy	Anodize (Black)	-	Unhardened	Standard Grade	23 ～ 70	1 ～ 8
-	1	9 Days	-	Non-magnetic / Anti-Reflection	21 ～ 60	3 ～ 58	2 ～ 10	[Aluminum] 2000 Series Aluminum Alloy	Anodize (Black)	-	Unhardened	Standard Grade	23 ～ 70	1 ～ 8
-	1	6 Days	10	-	-	2 ～ 2.6	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	7 ～ 12	1 ～ 8
-	1	6 Days	10	-	-	3 ～ 58	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	7 ～ 12	1 ～ 8
-	1	6 Days	10	-	-	2 ～ 2.6	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	7 ～ 12	1 ～ 8
-	1	6 Days	10	-	-	3 ～ 58	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	7 ～ 12	1 ～ 8
-	1	6 Days	10	-	-	2 ～ 2.6	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	7 ～ 12	1 ～ 8
-	1	6 Days	10	-	-	3 ～ 58	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	7 ～ 12	1 ～ 8
-	1	6 Days	10	-	-	2 ～ 2.6	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	7 ～ 12	1 ～ 8
-	1	6 Days	10	-	-	3 ～ 58	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	7 ～ 12	1 ～ 8
-	1	6 Days	10	-	-	2 ～ 2.6	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	7 ～ 12	1 ～ 8
-	1	6 Days	10	-	-	3 ～ 58	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	7 ～ 12	1 ～ 8
-	1	6 Days	10	-	-	2 ～ 2.6	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	7 ～ 12	1 ～ 8
-	1	6 Days	10	-	-	3 ～ 58	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	7 ～ 12	1 ～ 8
-	1	6 Days	10	-	-	2 ～ 2.6	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	7 ～ 12	1 ～ 8
-	1	6 Days	10	-	-	3 ～ 58	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	7 ～ 12	1 ～ 8
-	1	6 Days	10	-	-	2 ～ 2.6	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	7 ～ 12	1 ～ 8
-	1	6 Days	10	-	-	3 ～ 58	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	7 ～ 12	1 ～ 8
-	1	6 Days	10	-	-	2 ～ 2.6	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	7 ～ 12	1 ～ 8
-	1	6 Days	10	-	-	3 ～ 58	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	7 ～ 12	1 ～ 8
-	1	6 Days	10	-	-	2 ～ 2.6	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	11.5 ～ 25	1 ～ 8
-	1	6 Days	10	-	-	3 ～ 58	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	11.5 ～ 25	1 ～ 8
-	1	6 Days	10	-	-	2 ～ 2.6	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	11.5 ～ 25	1 ～ 8
-	1	6 Days	10	-	-	3 ～ 58	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	11.5 ～ 25	1 ～ 8
-	1	6 Days	10	-	-	2 ～ 2.6	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	11.5 ～ 25	1 ～ 8
-	1	6 Days	10	-	-	3 ～ 58	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	11.5 ～ 25	1 ～ 8
-	1	6 Days	10	-	-	2 ～ 2.6	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	11.5 ～ 25	1 ～ 8
-	1	6 Days	10	-	-	3 ～ 58	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	11.5 ～ 25	1 ～ 8
-	1	6 Days	10	-	-	2 ～ 2.6	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	11.5 ～ 25	1 ～ 8
-	1	6 Days	10	-	-	3 ～ 58	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	11.5 ～ 25	1 ～ 8
-	1	6 Days	10	-	-	2 ～ 2.6	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	11.5 ～ 25	1 ～ 8
-	1	6 Days	10	-	-	3 ～ 58	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	11.5 ～ 25	1 ～ 8
-	1	6 Days	10	-	-	2 ～ 2.6	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	11.5 ～ 25	1 ～ 8
-	1	6 Days	10	-	-	3 ～ 58	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	11.5 ～ 25	1 ～ 8
-	1	6 Days	10	-	-	2 ～ 2.6	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	11.5 ～ 25	1 ～ 8
-	1	6 Days	10	-	-	3 ～ 58	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	11.5 ～ 25	1 ～ 8
-	1	6 Days	10	-	-	2 ～ 2.6	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	11.5 ～ 25	1 ～ 8
-	1	6 Days	10	-	-	3 ～ 58	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	11.5 ～ 25	1 ～ 8
-	1	6 Days	10	-	-	2 ～ 2.6	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	11.5 ～ 25	1 ～ 8
-	1	6 Days	10	-	-	3 ～ 58	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	11.5 ～ 25	1 ～ 8
-	1	6 Days	10	-	-	2 ～ 2.6	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	11.5 ～ 25	1 ～ 8
-	1	6 Days	10	-	-	3 ～ 58	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	11.5 ～ 25	1 ～ 8
-	1	6 Days	10	-	-	2 ～ 2.6	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	11.5 ～ 25	1 ～ 8
-	1	6 Days	10	-	-	3 ～ 58	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	11.5 ～ 25	1 ～ 8
-	1	6 Days	10	-	-	2 ～ 2.6	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	11.5 ～ 25	1 ～ 8
-	1	6 Days	10	-	-	3 ～ 58	2 ～ 10	[Steel] EN 1.1191 Equiv.	Black Oxide	0 to -0.3	Unhardened	Standard Grade	11.5 ～ 25	1 ～ 8

1
2
3
4
5
Next >>

Products homepage

Basic information

Shape	Shouldered	RoHS Information	RoHS Requirements Fulfilled	Inner Shape	Straight
O.D. Tolerance	0 to -0.2	I.D. Tolerance	+0.3 to +0.1	Sale Type	Sold Separately
Dimension Specifying Method	Dimension Configurable Type

Configure

288Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Features, Areas of Application
Corrosion and Chemical Resistance

Non-magnetic

Heat-Resistant

Anti-Reflection
Clear
O.D. D(mm)
[5-20/0.5mm Unit(s)][21-60/1mm Unit(s)]
Clear
I.D.(mm)
2

2.6
[3-58/0.5mm Unit(s)]
Clear
Thickness/Length(mm)
[2-10/0.1mm Unit(s)]
Clear
Material
- Steel
  - EN 1.0038 Equiv.
  - EN 1.1191 Equiv.
- Stainless Steel
  - EN 1.4037 Equiv.
  - EN 1.4301 Equiv.
  - EN 1.4401 Equiv.
- Aluminum
  - 2000 Series Aluminum Alloy
- Brass (EN CW614N Equiv. )
- EN 1.2510 Equiv.
Clear
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- LTBC Plating
- Anodize (Clear)
- Anodize (Black)
Clear
Thickness/Length Tolerance
0 to -0.3

±0.01
Clear
Hardness(HRC)
- 45～50HRC
- 55HRC～
- Unhardened
Clear
Precision
- Precision Grade
- Standard Grade
Clear
Shoulder Dia. H(mm)
[7-25/0.5mm Unit(s)][23-70/1mm Unit(s)]
Clear
Shoulder Thickness T(mm)
[1-8/0.1mm Unit(s)]
Clear
Type
- FTCAA
- FTCAB
- FTCB
- FTCBBB
- FTCC
- FTCM
- FTCMB
- FTCMC
- FTCMM
- FTCMR
- FTCMS
- FTCR
- FTCS
- FTCSK
- FTCSKB
- FTCSKM
- FTCSS
- FTCSU
- FTCSUR
- FTCSUS
Clear
Filter by CAD data type
- 2D
- 3D
Clear