Registrace
Podmínky filtrování
  • Grade, Type
    • Chloroprene (CR)
  • With or w/o Adhesive
  • Thickness T(mm)
    • Width A(mm)
        [20–500/10mm jednotek]
      • Length B(mm)
          [20–40/10mm jednotek]
        • Hardness (Shore, Asker, Penetration)
        • Color
        • Specifications
        • Type
        • CAD
        MISUMI

        Sponge sheets / NBR, CR, EPDM, SI, FPM, PUR / >C1, C8, C15, C25, C30, C35 / adhesive layer (SGNWA-40-20-5)

        Sponge sheets / NBR, CR, EPDM, SI, FPM, PUR / >C1, C8, C15, C25, C30, C35 / adhesive layer SGNWA-40-20-5

        Číslo dílu:

        SGNWA-40-20-5
        Vymazat
        Množství:

        Obrysový výkres a tabulka specifikací

        Back to the Category Panels (polyurethane rubber, rubber, foam, felt)

        Technical Drawing - Panels (polyurethane rubber, rubber, foam, felt)

        Urethane/Rubber Sponge/Configurable A/B Dimensions:Related Image
        Open the technical drawing in the new window

        Available dimensions and tolerances can be found under the tab More information.
         

        Basic Properties (e.g., material, hardness, coating, tolerance) - Panels (polyurethane rubber, rubber, foam, felt)

        Standard TypeConfigurable Type Material HardnessColor
        No AdhesiveAdhesiveNo AdhesiveAdhesive
        SGNNSGNSSGNNFSGNSFPolyurethane Sponge(Less than Asker C1)Black
        --SGNCSGNCAChloroprene Rubber SpongeAsker C25Black
        --SGNWSGNWAChloroprene Rubber SpongeAsker C25White
        --SGNPSGNPAEPDM SpongeAsker C8Black
        --SGNBSGNBANBR SpongeAsker C30Black
        SISPSISASGNASGNAASilicon Rubber SpongeAsker C35* (Asker C22)Orange
        --SGNLSGNLASilicon Rubber SpongeAsker C15Orange
        --SGNFSGNFAFluororubber SpongeAsker C35Black
        Temperature limit for seals is 80°C.
        SGNW and SGNWA might discolor by aging.
        * Values in ( ) are applicable to Standard Type of silicon sponge.

        Further specifications can be found under the tab More information.
         

        Composition of a Product Code - Panels (polyurethane rubber, rubber, foam, felt)

        ■Standard Type
        Part Number-A-B
        SGNN10
        SISP10        		-
        -        		100
        250        		-
        -        		100
        100

        ■Configurable TypeA≥B
        Part Number-A-B-T
        SGNCA-320-220-10

        Seznam čísel dílů

        Počet položek
      • 1
        • Číslo dílu
        SGNWA-40-20-5

        Grade, Type

        With or w/o Adhesive

        Thickness T

        (mm)

        Width A

        (mm)

        Length B

        (mm)

        Hardness (Shore, Asker, Penetration)

        Color

        Specifications

        		RoHS?Minimální objednací množství
        [Chloroprene (CR)] Chloroprene Rubber Sponge
        Adhesive
        5
        40
        20
        Asker C25
        White
        Configurable Type
        10
        1 kusů
        Jednotková cena (bez DPH)(Jednotková cena včetně DPH)
        Standardní datum odeslání
        -
        ( - )
        7 pracovních dnů
      • 1

        • Podrobné údaje

        Základní informace

        Technické údaje

        Náčrt a specifikace

        Back to the Category Panels (polyurethane rubber, rubber, foam, felt)

        Technical Drawing - Panels (polyurethane rubber, rubber, foam, felt)

        Urethane/Rubber Sponge/Configurable A/B Dimensions:Related Image
        Open the technical drawing in the new window

        Specification Tables - Panels (polyurethane rubber, rubber, foam, felt)

        ■Accuracy Standards
        Polyurethane Sponge
        A, BTolerance
        390 or Less±2
        400~790±2.5
        800±3
        Others
        A, BTolerance
        190 or Less±1.5
        200~390±2
        400 or More±3
        ■Standard Type
        Part NumberT ToleranceSelection
        TypeT SelectionAB
        SGNN
        SGNS        		10±1100
        200
        500        		100
        400
        800
        30±2
        50±3
        SISP
        SISA        		3±0.5100
        250        		100
        5±1
        10
        ■Configurable Type
        Part Number10mm IncrementT
        Selection        		T Tolerance
        AB
        SGNC
        SGNW
        SGNP
        SGNB
        SGNCA
        SGNWA
        SGNPA
        SGNBA        		20~50020~5003
        5        		±0.5
        8
        10
        15
        20
        25        		±1
        30±1.5
        SGNA
        SGNL
        SGNF
        SGNAA
        SGNLA
        SGNFA        		20~50020~5002
        3
        5        		±0.5
        10±1.5
        SGNNF
        SGNSF        		10~50010~50010±1
        30±2
        50±3
        ■Characteristic values of raw material rubber for rubber sponge
        ItemUnitPolyurethane SpongeChloroprene Rubber SpongeEPDM SpongeNBR SpongeSilicon Rubber SpongeFluororubber Sponge
        HS35HS22HS15
        Apparent Densityg/cm30.0220.180.130.210.35~0.370.35~0.370.30.45
        Air Bubble-Continuous CellIndependent CellIndependent CellIndependent CellIndependent CellIndependent Cell
        Tensile StrengthMPa
        {kgf/cm2}        		≥0.076
        {≥0.77}        		0.9
        {9}        		0.5
        {5}        		0.8
        {8}        		1.6~1.8
        {16~18}        		0.7
        {7}        		1
        {10}        		2.7
        {27}
        Elongation%≥120170200200200~250250280
        25% Compression LoadMPa
        {kgf/cm2}        		-5.3×10-2
        {0.54}        		3.1×10-2
        {0.32}        		6.5×10-2
        {0.66}        		- (*1)- (*3)- (*1)
        Continuous Use Temperature *2°C-10~70-35~130-40~130-10~140-70~200-20~230
        Abrasion Resistance◎○○◎△◎
        Anti-Aging○◎◎○◎◎
        Water Resistance△○○○○◎
        Chemical ResistanceGasoline, Light Oil○○×◎△◎
        Acid×~△○×~○△~○△~○◎
        Alkali×◎○○◎△~○
        Organic Solvent××~△××~△××~○
        For Adhesive Type, the adhesion strength decreases under high temperature (at approx. 80°C or more).
        *1 Compression Set <40% During Compression> (100°C/24h) 29%
        *2 The temperature of continuous use is the temperature where long-term use does not cause a sharp decline in quality.
        *3 Compression Set <40% During Compression> (150°C/24h) 8% (based on JIS K6250)
         

        General Information - Panels (polyurethane rubber, rubber, foam, felt)

         

        Selection details of panels (polyurethane rubber, rubber, foam, felt)

        - Material: polyurethane rubber (PU/PUR), heat-resistant polyurethane rubber, low-impact polyurethane rubber, abrasion-resistant polyurethane rubber, antistatic polyurethane, nitrile (NBR), chloroprene rubber (CR), polyethylene (EPDM), silicone (SI), fluorine (FPM), butyl rubber (IIR), natural rubber (NR), hard rubber, special synthetic rubber, polyurethane foam, head-insulating foam, polyethylene foam, low-rebound foam

        - Thickness (mm): 0.5 to 50

        - Width (mm): 3 to 500

        - Length (mm): 10 to 2000

         

        Description/Basics

        Foam plates and rubber plates are provided for damping or for sound proofing. MISUMI offers these in various Shore hardening for a wide variety of tasks. Due to the variety of materials, different resistances to environmental influences are possible depending on the application. The foam plates reduce sound in machines and can reduce the sound emissions of a system. For more information on foam characteristics, follow this link.
        Rubber plates or foam plates are also suitable in conveyor systems to absorb components to be transported at a dampened level or to protect them from damage as a lateral guide when the components bump into each other. Hard rubber panels or low-impact rubber or foam panels reduce the impact energy of the components. These minimize and lower the vibrations in an application.
        In addition, MISUMI offers highly abrasion-resistant polyurethane (Vulkollan), which has an abrasion resistance that is six times higher than with conventional polyurethane.
        Ceramic polyurethane plates contain ceramic particles. After machining, these can have a smooth surface despite low Shore hardness.
        The polyurethane rubber plates are also available antistatically. The specific resistance of antistatic polyurethane plates prevents static charging. This prevents any damage to electronic components.
        For applications with higher temperatures, MISUMI offers heat-resistant polyurethane rubber, which can withstand a temperature range of up to approx. ~120°C (see the product specifications for exact information).
        MISUMI also offers low-friction and anti-friction rubber plates. Low-friction rubber plates are often used in the gentle component guide for belt conveyors and roller conveyors.
        Felt plates have the property of absorbing or dispensing oil and other liquids via the capillary effect. This property can be used to remove, for example, excess oil on a belt conveyor.

        In addition, MISUMI offers rubber plates and foam plates that are self-adhesive for simplified assembly. Furthermore, you will find double-adhesive tape for attaching rubber plates and foam plates.

        Additional properties on foam panels and rubber plates can be found in the Properties PDF.

        MISUMI also offers these products in a round shape as discs and sleeves made of rubber, natural rubber, foam and felt.

         

        Application Examples - Panels (polyurethane rubber, rubber, foam, felt)

        Application example
        (1) Low-friction rubber plate (2) belt conveyor

        Application example
        (1) Vibration damping plate

         

        Industrial Applications

        3D printer industry
        Automotive industry
        Pharmaceutical industry
        Packaging industry