One-Touch Couplings for Clean Applications / Reducer
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
- Order quantities extended (D-JIT)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- More Information
- Catalog
PPCGY
Specification Table
| Part Number | — | D2 |
| PPCGY6 | — | 4 |
| Part Number | B | L | P | Mass (g) | Effective Sectional Area (mm2) | ||
| Type | D1 | D2 | |||||
| PPCGY | 6 | 4 | 37.8 | 15.3 | 10 | 3.5 | 5.3 |
| 8 | 4 | 40.3 | 16.8 | 12.5 | 4 | 5.3 | |
| 6 | 40.9 | 17.4 | 4.5 | 9 | |||
| 10 | 6 | 43.9 | 18.9 | 12.5 | 5.5 | 9 | |
| 8 | 43.7 | 18.7 | 14.5 | 6.5 | 20 | ||
| 12 | 8 | 49.7 | 20.7 | 14.5 | 8.5 | 20 | |
| 10 | 50.2 | 21.2 | 17.5 | 10 | 35 | ||
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Part Number
|
|---|
| PPCGY6-4 |
| PPCGY8-4 |
| PPCGY8-6 |
| PPCGY10-6 |
| PPCGY10-8 |
| PPCGY12-8 |
| PPCGY12-10 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Tube O.D. D (D1) (Ø) | Tube O.D. D2 (Ø) | |
|---|---|---|---|---|---|---|---|
4.41 € | 1 | Available | 5 Days | 10 | 6 | 4 | |
4.41 € | 1 | Available | 5 Days | 10 | 8 | 4 | |
4.78 € | 1 | Available | 5 Days | 10 | 8 | 6 | |
4.78 € | 1 | Available | 5 Days | 10 | 10 | 6 | |
4.91 € | 1 | Available | 5 Days | 10 | 10 | 8 | |
4.91 € | 1 | Available | 5 Days | 10 | 12 | 8 | |
5.92 € | 1 | Available | 5 Days | 10 | 12 | 10 |
Loading...
Specifications / Overview
·Clean environment compatible polypropylene (PP) is used for the main body.
·Plastic body is semitransparent so that fluid can be confirmed from the outside.
■ Precautions for Use
·For water or fluid, Inserts for Soft Tubes (PUIT / PUSIT) must be used. Keep the surge pressure to below max. pressure rating.
·If threaded portion is made of PP, tighten coupling by screwing hand tight, then giving 2 or 3 turns with a wrench.
Over tightening may damage threads. Insufficient tightening may cause loosening or leaking.
·Due to creep deformation, screws may become loose and minute leakages may occur. Periodical tightening maintenance is recommended.
If retightening does not work, then replace the coupling in use.
·If there is a possibility of machine and equipment damage due to fluid leakages, consider providing protective measures such as covers prior to use.
·No oil permitted.
| Applicable Fluid | Air, Water, Chemicals |
| Operating Temperature Range* | 0 to 80°C |
| Max. Operating Pressure | 0.9 MPa (20°C) |
| Operating Vacuum Level | -100 kPa |
[Recommended Tightening Torque]
Screw Main Body: Polypropylene
R1/8:0.5 N⋅m, R1/4:0.7 N⋅m, R3/8:1.0 N⋅m
Screw Main Body: EN 1.4301 Equiv.
R1/8: 7 to 9 N⋅m, R1/4: 12 to 14 N⋅m, R3/8: 22 to 24 N⋅m
(The values are for seal tape 2 rotations. Retighten by up to 2 additional rotations if required.)
Basic information
| Type | Single-Action Coupling | Fitting Type | Sockets, Reducers | Applicable Fluid | Water / Air / Chemical |
|---|---|---|---|---|---|
| Main Body Material | Polypropylene | Application | Clean | Thread Material | No Thread |
| Seal Material | Ethylene Propylene Rubber (EPDM) | Sockets, Reducers | Reducer | Operating Temperature Range(°C) | 0::80 |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
MISUMI Unit еxample related to this product
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Způsob platby
Platba na účet
Zálohová platba
Výroba na vyžádání
Certifikáty
Copyright © MISUMI Corporation Všechna práva vyhrazena.