Floating Joints - Specified Type

 

L Fixed	L Configurable	Material	Surface Treatment	Surface Hardness
FJR	FJRL	1.1191/C45E	Salt-bath Nitriding	500HV~
FJRSS	-	1.4301/X5CrNi18-10	-	-
FJRSW	FJRSWL		Nitride Treatment	1000HV~
FJRC	-		Hard Chrome Plating	750HV~

For L Dimension Configurable type, when h+T+L≤3M, the tapped hole goes through.  When T=2, only FJR is available.
* for T dimension only. Thread diameters 8, 10 and 12 are only applicable to 8-1.25, 10-1.25 and 12-1.25.

■Floating Joints and Holders Application Table (FJD · FJDSW · FJDL)

M- Pitch	FJD_ FJDSW_ T Dim.*	HLRA_ P.1429 HLRB_ P.1429 HLRC_ P.1430	FJD_ FJDSW T Dim.*	HLRE_ P.1428	FJD_ FJDSW T Dim.	HLRD_ P.1430	FJD_ FJDSW T Dim.	HLRL_ P.1428	FJD_ FJDSW T Dim.	HLRAF P.1429
3-0.5	4	4	4	-	-	-	-	-	-	-
4-0.7
5-0.8		6							3~6	6-3~6
6-1.0		7		7	8	7	6	7	4~8	7-4~8
8-1.25	6	10	6	10	12	10		10	5~12	10-5~12
10-1.5	8	13	8	13	-	-		13	6~12	13-6~12
16-2.0	12	21	12	21			-	-	-	-
20-2.5	15	25	15	25	20	25			15~20	25-15~20
22-2.5	20	27	20	-	20	25			12~20	27-12~20

 For holders of size 27, only HLRA · HLRC is available.
* For detailed holder dimensions, refer to Here~1430

■Floating Joints and Holders Application Table (FJR · FJR_ · FJR_ _ · FJR_ _ _)

M- Pitch	FJR FJR_ FJR_ _ T Dim.*	HLRA_ P.1429 HLRB_ P.1429 HLRC_ P.1430	FJR FJR_ FJR_ _ T Dim.*	HLRE_ P.1428	FJR FJR_ FJR_ _ T Dim.	HLRD_ P.1430	FJR FJR_ FJR_ _ T Dim.	HLRL_ P.1428	FJR FJR_ FJR_ _ T Dim.	HLRAF P.1429
3-0.5	4	6	4	-	-	-	-	-	3~6	6-3~6
4-0.7		7		7	8	7	6	7	3~8	7-3~8
5-0.8	6	8	6	8	10	8		8	3~10	8-3~10
6-1.0		10		10	12	10		10	3~12	10-3~12
8-1.0	8	13	8	13	13	13		13	4~12	13-4~12
8-1.25
10-1.25		16		16	15	16	8	16	5~15	16-5~15
10-1.5
12-1.25	12	18	12	18	16	18		18	-	-
12-1.5
14-1.5		21		21	19	21	10	21	6~15	21-6~15
16-1.5	15	25	15	25	20	25		25	8~20	25-8~20
18-1.5
22-1.5	20	27	20	-	-	-	-	-	12~20	27-12~20

 For holders of size 27, only HLRA · HLRC is available.
* For detailed holder dimensions, refer to Here~1430