Registrace

Překládáme náš obchod do češtiny! 

Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Potvrzeno
  • Belt Width
  • Belt Width (inch)
  • [T] Number of Teeth
  • Pulley Shape
  • Material
    • Aluminium
  • Surface Treatment
  • Shaft Bore Specifications (Round Hole + Tap) [P](mm)
      [12–28/1mm jednotek]
    • Type
    • CAD
    • Odhadované dodací dny
      • Vše
      • V rámci 9 pracovních dnů

    Další možnosti

    • Change an Angle of Set Screw to 90° [KC](°)
    • Flange not swaged when shipped
    • Flange swaged only on the hub side when shipped
    • Flange swaged only on the opposite side of the hub when shipped
    • Flange Cut [FC](mm)
        [58–65/0.5mm jednotek]
      • Cut the hub length in 0.5mm increment(mm)
          [8–12/0.5mm jednotek]
        • Add through holes to the side (at three locations) [KTC](mm)
            [20–30/1mm jednotek]
          • Add through holes to the side (at four locations) [KFC](mm)
              [20–30/1mm jednotek]
            • Through Hole Dia. [K](mm)
                [4–13/0.5mm jednotek]
              • Add tapped holes on the side (at three locations) [QTC](mm)
                  [19–31/1mm jednotek]
                • Add tapped holes on the side (at four locations) [QFC](mm)
                    [19–31/1mm jednotek]
                  • Tap Dia. [M](mm)
                  • Tapped Hole Dimension Change [TPC](mm)
                  • Set Screw Length Change [SLH](mm)
                  MISUMI

                  Timing belt pulleys / L / flanged pulley selectable / configurable / aluminium, steel (ATPA19L050-B-P13)

                  Timing belt pulleys / L / flanged pulley selectable / configurable / aluminium, steel ATPA19L050-B-P13

                  Pozor

                  • Please note that the swaged flange options, NFC, RFC, and LFC, are not reflected in the CAD data.

                  Číslo dílu:

                  ATPA19L050-B-P13
                  Vymazat
                  Množství:
                  Loading...

                  Obrysový výkres a tabulka specifikací

                  Back to the Category Toothed Pulleys/Timing Pulleys/Idler Pulleys

                  Technical Drawing - Toothed Pulleys/Timing Pulleys/Idler Pulleys

                  Timing Pulleys L Type:Related Image
                  Open the technical drawing in the new window
                   

                  Available dimensions and tolerances can be found under the tab More Information.
                   

                  Basic Properties (e.g., material, hardness, coating, tolerance) - Toothed Pulleys/Timing Pulleys/Idler Pulleys

                   
                  TypeBelt WidthMaterial *1Surface TreatmentAccessory *1
                  Set Screws
                  12.7mm
                  (1/2inch)                  		19.1mm
                  (3/4inch)                  		25.4mm
                  (1inch)                  		38.1mm
                  (1.5inch)                  		PulleyFlange
                  L050L075L100L150
                  ATPA●●●●Extra Super Duralumin
                  Aluminum Alloy                  		Aluminum AlloyClear AnodizeEN 1.4301 Equiv.
                  ATPB●●●●Black Anodize
                  ATPK●●●●Hard Clear Anodize *2
                  ATPN●●●●Electroless Nickel Plating
                  ATPT●●●●EN 1.1191 Equiv.EN 1.0330 Equiv.-EN 1.7220 Equiv.
                  (Black Oxide)
                  ATP●●●●Black Oxide
                  ATPP●●●●Electroless Nickel Plating
                  Flange is installed, and set screws are included with Shaft Bores P, N and C.
                  *1. The above material and accessory might be changed to the ones equivalent to the originals.
                  *2. Hard Clear Anodize: Film Hardness 300HV ~

                  Further specifications can be found under the tab More Information.
                   

                  Composition of a Product Code - Toothed Pulleys/Timing Pulleys/Idler Pulleys

                   Part Number-Pulley Shape-Shaft Bore Specs., I.D.-Z-J-Q-R-S-T
                  (Shaft Bore Specs.: H, P, N, C)ATP14L075-A-N10       R47    
                  (Shaft Bore Specs.: V, F)ATP36L100-A-V15-Z29-J18.0       
                  (Shaft Bore Specs: Y)ATP50L150-A-Y25    -Q47--S12-T12

                  Alterations - Toothed Pulleys/Timing Pulleys/Idler Pulleys

                  Timing Pulleys L Type:Related Image

                  Here to the Overview of Options as PDF.

                  Seznam čísel dílů

                  Počet položek
                • 1
                  • Číslo dílu
                  ATPA19L050-B-P13

                  Belt Width

                  Belt Width (inch)

                  [T] Number of Teeth

                  Pulley Shape

                  Material

                  Surface Treatment

                  Shaft Bore Specifications (Both Ends Stepped Hole) [Y]

                  (mm)

                  Shaft Bore Specifications (New JIS Keyway Hole + Tap) [N]

                  (mm)

                  Shaft Bore Specifications (Old JIS Keyway Hole + Tap) [C]

                  (mm)

                  Shaft Bore Specifications (Round Hole + Tap) [P]

                  (mm)

                  Shaft Bore Specifications (Round Hole) [H]

                  (mm)

                  Shaft Bore Specifications (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) [NK]

                  Shaft Bore Specifications (Stepped Hole) [V]

                  (mm)

                  Shaft Bore Specifications (Stepped Hole: Counterbored Holes on the Hub Side) [F]

                  (mm)

                  WB

                  		RoHS?Minimální objednací množství
                  12.7
                  0.5
                  19
                  Shape B
                  [Aluminium] Aluminum Alloy 7000 series
                  Clear Anodize
                  -
                  -
                  -
                  13
                  -
                  -
                  -
                  -
                  -
                  10
                  1 kusů
                  Jednotková cena (bez DPH)(Jednotková cena včetně DPH)
                  Standardní datum odeslání
                  -
                  ( - )
                  9 pracovních dnů
                • 1

                  • Podrobné údaje

                  Základní informace

                  Pozor

                  • Please note that the swaged flange options, NFC, RFC, and LFC, are not reflected in the CAD data.
                  Technické údaje

                  Náčrt a specifikace

                  Back to the Category Toothed Pulleys/Timing Pulleys/Idler Pulleys

                  Technical Drawing - Toothed Pulleys/Timing Pulleys/Idler Pulleys

                  Timing Pulleys L Type:Related Image
                  Open the technical drawing in the new window

                  Specification Tables - Toothed Pulleys/Timing Pulleys/Idler Pulleys

                  Part NumberPulley Shape
                  AB, D
                  Shaft Bore Specifications (~): Specify in 1mm Increment, (, ): Select the former or latterShaft Bore Specifications (~): Specify in 1mm Increment, (, ): Select the former or latter
                  TypeNumber of TeethType
                  Nominal Width                  		Pulley
                  Shape                  		H
                  Round Hole                  		P
                  Round Hole + Tap                  		N, C
                  Keyway + Tap                  		V Stepped HoleY Both Ends SteppedH
                  Round Hole                  		P
                  Round Hole + Tap                  		N, C
                  Keyway + Tap                  		V, F Stepped Hole
                  VZ
                  Z-d≥2                  		J
                  (0.1mm Increment)                  		YQ, R
                  Q(R)-Y≥2                  		S, TV, FZ
                  Z-d≥2                  		J
                  (0.1mm Increment)
                  Aluminum
                  ATPA
                  ATPB
                  ATPK
                  ATPN

                  Steel
                  ATPT
                  ATP
                  ATPP                  		10L050A

                  B                  		6, 6.35, 7~166, 6.35, 7~148, 10, NK10, 11~146~148~163.0≤J≤W-3.06~148~163~21
                  S+T≤W-3                  		6, 6.35, 7~166, 6.35, 7~148, 10, NK10, 11~146~148~163.0≤J≤L-3.0
                  12L050, L0758~228~188, 10, NK10, 11~188~2010~238~2010~228~228~188, 10, NK10, 11~188~2010~23
                  14L050

                  L075

                  L100

                  L150                  		8~278~218, 10, NK10, 11~218~2510~278~2510~278~268~208, 10, NK10, 11~208~2410~26
                  158~278~238, 10, NK10, 11~238~2510~278~2510~278~268~208, 10, NK10, 11~208~2410~26
                  1610~3210~2610, NK10, 11~2310~3012~3210~3012~3210~2810~2210, NK10, 11~2210~2612~28
                  1710~3210~2610, NK10, 11~2610~3012~3210~3012~3210~3010~2410, NK10, 11~2310~2812~30
                  1810~3710~2910, NK10, 11~2910~3512~3710~3512~3710~3210~2610, NK10, 11~2310~3012~32
                  1912~4212~3412~3012~4014~4212~4014~4212~3412~2812~2512~3214~34
                  2012~4212~3412~3012~4014~4212~4014~4212~3612~3012~2612~3414~36
                  2112~4812~4012~3212~4614~4812~4614~4812~3812~3012~2612~3614~38
                  2212~5212~4212~3412~5014~5212~5014~5212~4112~3312~3012~3914~41
                  2412~5912~4912~4112~5714~5912~5714~5912~4612~3812~3012~4414~46
                  2512~5912~4912~4112~5714~5912~5714~5912~4612~3812~3012~4414~46
                  2612~5912~4912~4112~5714~5912~5714~5912~4612~3812~3012~4414~46
                  2812~6712~5712~4912~6514~6712~6514~6712~4612~3812~3012~4414~46
                  3012~7212~6212~5012~7014~7212~7014~7212~5212~4212~3412~5014~52
                  3214~7614~6514~5014~7416~7614~7416~7614~5214~4214~3414~5016~52
                  3414~8014~6514~5014~8016~8214~7516~8214~5914~4914~4114~5716~59
                  3614~8014~6514~5014~8016~9414~7516~9414~5914~4914~4114~5716~59
                  3815~8015~6515~5015~8017~9515~7517~9515~5915~4915~4115~5717~59
                  4015~8015~6515~5015~8017~9515~7517~9515~5915~4915~4115~5717~59
                  4216~8016~6516~5016~8018~9516~7518~9516~6716~5716~4916~6518~67
                  4416~8016~6516~5016~8018~9516~7518~9516~6716~5716~4916~6518~67
                  4616~8016~6516~5016~8018~9516~7518~9516~6716~5716~4916~6518~67
                  4816~8016~6516~5016~8018~9516~7518~9516~6716~5716~4916~6518~67
                  5016~8016~6516~5016~8018~9516~7518~9516~6716~5716~4916~6518~67
                  ATPT ATP
                  ATPP                  		60A
                  D                  		16~10016~6516~5016~10018~12516~10018~12516~6716~5716~49--
                  7216~10016~6516~5016~10018~12516~10018~12516~6716~5716~49--
                  Shaft Bore Dia. 8, 11, 13, 14, 17, 21~50 are not available for Shaft Bore Spec. C.      

                  Alterations - Toothed Pulleys/Timing Pulleys/Idler Pulleys


                  Timing Pulleys L Type:Related Image

                  Here to the Option Overview PDF

                  General Information - Toothed Pulleys/Timing Pulleys/Idler Pulleys

                  Toothed pulley - synchronous pulley - belt pulley - product assortment

                   

                  Selection details of toothed pulleys/timing pulleys/idler pulleys

                  - Material: aluminum, steel, stainless steel (stainless steel), plastic

                  - Coatings: uncoated, burnished, anodized, nickel-plated

                  - Profile form: 1.5GT, 2GT, 3GT, 5GT, P2M, P3M, P5M, P8M, S2M, S3M, S5M, S8M, S14M, T2.5, T5, T10, AT5, AT10, 5M, 8M, 14M, 8YU, H, L, MXL, XL, PowerGrip GT3: MR2, MR3, MR5

                  - ISO tolerances: H7

                  - Belt width (mm): 4, 4.8, 6, 6.4, 7, 7.9, 9, 9.5, 10, 12, 12.7, 15, 18, 19.1, 20, 25, 25.4, 26, 28, 30, 31, 38,1, 40, 50, 50.8, 53, 60, 74, 76.2, 100

                  - Belt width (inches): 0.19, 0.25, 0.31, 0.37, 0.5, 0.75, 1, 1.5, 2

                  - Number of teeth: 10 to 72

                   

                  Description/Basics

                  The toothed pulley for mechanical engineering is intended for the transmission of force and torque. Timing pulleys enable a gear ratio of speeds through belt pulleys of different sizes. Timing pulleys are more efficient, durable and significantly more maintenance-friendly compared to chain transmissions.

                  How much torque and load a timing pulley can transmit depends on the width of the belt. The width of the belt must be calculated. It is recommended to ensure the belt is correctly tensioned. MISUMI already offers the suitable idler pulley and return rollers with integrated ball bearings. For design and design help follow this link.

                  Different profile shapes of the toothed belts and belt pulleys are responsible for the transmission of power. Depending on the positioning accuracy, the applied torque and the conveying weight, MISUMI offers the fitting pulley. Toothed belt drives are generally used in the industry in three areas:
                  Positioning: Timing pulleys is often used in 3D printers. A toothed pulley with a semi-circular profile (e.g., GT) is often used for the required position accuracy of a 3D printers. The round shape offers the benefit of little play when the direction changes.
                  Drive: toothed pulleys are also used for high torque. In most cases, a timing pulley with a rounded trapezoidal profile (e.g., S8M) is used. These are particularly well suited for the transmission of high forces, which occur in drives of various applications in order to drive mechanical components.
                  Conveying: toothed pulleys can also be used for transporting loads. A straight trapezoidal profile is often used for this purpose (e.g., AT). This toothed pulley shape offers a large surface for loading and transmitting of loads.

                  Which toothed pulley or timing pulley is the right one for your application depends on the respective task of the toothed belt drive. Different toothed disc profiles have proven themselves for each type of application.

                  Various bore hole shapes and fastening variants are available for shaft mounting. These allow fastening via set screws, keyways and by means of Mecha locks. Fastening via a clamping sleeve has the further advantage that it allows adjusting the alignment continuously. The MISUMI product assortment has these ready-to-install.

                  Application Examples - Toothed Pulleys/Timing Pulleys/Idler Pulleys

                  Application example: idler pulley - idler pully toothed with chain tensioner - toothed pulley with chain tensioner

                  Application example: idler pulley
                  (1) Idler pulleys, (2) chain tensioner

                  Application example: return roller - return roller with cantilever pin - synchronous pulley with on-board disc - toothed pulley with on-board disc

                  Application example: deflection roller
                  S (1) Toothed pulleys with crimp disc, (2) nut, (3) washer, (4) cantilever shaft, (5) retaining ring

                  Application example: synchronous pulleys - toothed pulleys with toothed belts - toothed pulley with screw-on clamp

                  Application example: timing pulleys
                  (1) Flat head screw, (2) Timing pulley, (3) Timing belt, (4) Screw-on terminal

                  Application example: toothed belt drives - toothed pulleys with crimp disc - idler pulley with crimp disc - tensioning of the toothed belt

                  Application example: of toothed belt drives
                  (1) Toothed belt, (2) driven toothed pulley with crimp disc, (3) idler pulley with crimp disc, (4) driving toothed pulley with crimp disc

                   

                  Industrial Applications

                  3D printer industry
                  Automotive industry
                  Pharmaceutical industry
                  Packaging industry

                  Podobné produktyZobrazit všechny podobné produkty

                  Pro tento produkt nebyly nalezeny žádné podobné produkty.
                  Číslo dílu bylo potvrzeno