Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!
* ø5.5 for HBLTS6-5
[ ! ] Both sides and screw holes of NBLTS6 are not anodized.
Type | [M] Material | [S] Surface Treatment |
NBLTS6 | EN AW-6063-T5 Equiv. | Anodize [ ! ] |
HBLTS6 (−5) | EN AW-6061-T5 Equiv. | |
HBLTSB6 | Black Anodize | |
CHBLTS6 | Clear Coating (Anodize + Transparent Coating) |
Part Number |
HBLTS6 |
Part Number | Mass (g) | Applicable Screw, T Nut | Allowable Load (N) | |||
Type | Screws | Quantity | T Nut | Quantity | ||
NBLTS6 | 44 | CBM6−15 | 2 | HNTT6−6 | 2 | 1176 |
HBLTS6 | ||||||
HBLTS6−5 (For M5 Screws) | CBM5−15 | HNTT6−5 | ||||
HBLTSB6* (Black Anodize) | CBM6−15 | HNTT6−6 | ||||
CHBLTS6 (Clear Coating) |
Part Number | — | (C·SET·SST·SEU·SSU·SEP·SSP·SEC) |
HBLTS6 | — | SET |
HBLTS6 | — | C−SET |
Alterations | Code | Spec. | Applicable Bracket |
Mounting Hole Alteration for Cover | C | Adds taps on a bracket for cover mounting. (M5 on Both Sides) (Mounting Screw HCBM) ![]() | HBKTS6 |
NBLTS6 | |||
HBLTS6 | |||
HBLTS6-5 | |||
CHBLTS6 | |||
HBKUS6 |
Alterations | Code | Spec. | Applicable Bracket | |||||||||||||||||||||||||||||||||
Applicable Screws and Nuts Set Nuts Set | SET SST (Stainless Steel) SEU (Pre-Assembly Insertion Spring Nuts) SSU (Pre-Assembly Insertion Spring Nuts Stainless steel) SEP (Post-Assembly Insertion Spring Nuts) SSP (Post-Assembly Spring Nut Stainless steel) SEC (Captured Washer Screw, Nut) | Applicable screws and nuts for fixing the brackets on extrusions come in a set. Example: When NBLTS6 is specified
[ ! ] When specifying other than HBLTS6, | — | |||||||||||||||||||||||||||||||||
HBKTST6 | ||||||||||||||||||||||||||||||||||||
HBKTS6 | ||||||||||||||||||||||||||||||||||||
NBLTS6 | ||||||||||||||||||||||||||||||||||||
HBLTS6 | ||||||||||||||||||||||||||||||||||||
HBLTS6-5 | ||||||||||||||||||||||||||||||||||||
HBLTSB6 | ||||||||||||||||||||||||||||||||||||
CHBLTS6 | ||||||||||||||||||||||||||||||||||||
HBKUS6 |
■Mounting Hole Alteration for Cover (-C)
M5 tapped holes can be added on both sides.
Alteration part number example: HBLTS6-C
■Set of applicable Screws and Nuts Details
Alteration Part Number | Screws | Nut | ||||
---|---|---|---|---|---|---|
Part Number | Material | Type | Part Number | Material | Stopper | |
SET | CBM6-15 | Steel | Pre-Assembly | HNTT6-6 | Steel | Not Provided |
SST | SCB6-15 | Stainless Steel | Pre-Assembly | HNTTSN6-6 | Stainless Steel | Not Provided |
SEU | CBM6-15 | Steel | Pre-Assembly | HNTU6-6 | Steel | Provided |
SSU | SCB6-15 | Stainless Steel | Pre-Assembly | SHNTU6-6 | Stainless Steel | Provided |
SEP | CBM6-15 | Steel | Post-Assembly | HNTP6-6 | Steel | Provided |
SSP | SCB6-15 | Stainless Steel | Post-Assembly | SHNTP6-6 | Stainless Steel | Provided |
SEC | HCBST6-20 | Steel (With Washers) | Pre-Assembly | HNTT6-6 | Steel | Not Provided |
* For HBLTS6-5 only, the diameter of screws and nuts in the set is M5. (Example: CBM5-15, HNTT6-5)
Product | Part Number Example |
---|---|
Brackets (Set of Screws and Nuts) | HBLTS6-SET |
Aluminum Extrusion | HFS6-3030 |
■6 Series (Slot Width 8 mm) - For 1 Slot, Extruded Brackets
Product Name | Thick Brackets | Ultra Thick Brackets | Thick Brackets / Triangle Brackets | Offset Brackets | Unequal Sided Brackets | Brackets for Connecting Different Sizes of Extrusions Brackets | Thin Brackets |
---|---|---|---|---|---|---|---|
Product Photo | |||||||
Features | Made of the same material as aluminum extrusions with anodizing. Suitable when appearance well balanced with the extrusions is desired. | Numbers of screws are the same as those of thick brackets. Extrusions can be connected more securely. | Two mounting holes are provided on one side. Extrusions can be connected more securely with 4 screws. | Hole positions are offset. Can be combined with plates of 3 mm and 5 mm thickness when mounting plates on the side. | The vertical and horizontal lengths are unequal to each other. Usable where space is narrow. | Staggered mounting holes. Brackets to connect 20 and 30 square, 40/45 and 30 square Extrusions. | The brackets do not protrude from extrusion widths when used to cross connect extrusions. Suitable for use in limited space. |
Allowable Load | 1176 | 1176 | 1764 | 1176 | 1470 | — | 980/1568/2352 |
Representative models | This Product | HBLUS6 | HBLTSW6 (Thick Type) | HBLTH6 | HBLTF6 | HBLTS6-5L | HBLSS6 |
HBKTST6 (Perpendicularly Machined) | HBKUS6 (Perpendicularly Machined) | HBLDSWT6 (Triangle) | HBLTS8-6L | HBLSP6 (Tabbed) |
■Difference between extruded brackets and tabbed brackets
[This Product]Extruded Brackets | ·The extruded brackets are made of EN AW-6061-T5 Equiv., manufactured by aluminum extrusion. Surfaces are anodized. ·Suitable when appearance well balanced with the extrusions is desired. Designed to prevent dust from building up. ·With more strength than tabbed brackets, it is ideal for areas that require strength. |
Tabbed Brackets | ·The tabbed brackets are molded brackets made of EN AC-46100 Equiv. material. With no anodize treatment as a rule, the prices are economical compared to extruded brackets of the same size. ·Since the tabs stop rotating the brackets when tightening, work efficiency is improved. ·Various types of brackets with additional functions are available. |
■Perpendicularity
Perpendicularity of Extruded Brackets is manufactured within ±1° tolerance based on JIS Standard H4100 Special Grade.
(For 6 series: Squareness 0.03 and 0.06 are available.)
■How to Specify Allowable Load of Bracket
■Mechanical Properties of Aluminum Extrusions (JIS standard as reference)
Material (JIS Symbol) | EN AW-6063-T5 Equiv. | EN AW-6061-T5 Equiv. |
---|---|---|
Tensile Strength (N/mm2) | 155 or more | 245 or more |
Yield Stress (N/mm2) | 110 or more | 205 or more |
Young's Modulus (N/mm2) | 69972 | 69972 |
Brinell Hardness (HB) | 88 | 88 |
Surface Treatment | Anodize 9 µm or more | Anodize 9 µm or more |