Bearing housings / round flange / counterbore / screwed / deep groove ball bearing, double angular contact ball bearing / steel / black oxided, nickel-plated (ABGCB7004-S-100)

Click on this image to zoom in.

Volume Discount

MISUMI

Product Details:

Manufacturer part number: ABGCB7004-S-100

Brand: MISUMI

Price: 609.78 €

Delivery time: 9 Days

Technical Data:

Bearing I.D. d: 20 mm

Thickness T: 100 mm

Holder Surface Treatment: Black Oxide

Bearing Part Number: 7004

Cover Type Selection: S (for Oil Seal)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

ABGCB7004-S-100

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Back to the Category Bearings with Housing

Technical Drawing - Bearings with Housing

Angular Contact/Deep Groove Ball Bearing/Flanged Type:Related Image

Available dimensions and tolerances can be found under the tab More information.

Basic Properties (e.g., material, hardness, coating, tolerance) - Bearings with Housing

Type	Angular Contact Bearings (Back-to-Back Combination)	Housing, Inner Ring Spacer, Standard Cover Standard / Oil Seal / O-Ring Cover Inner Ring Collar		Cover Mounting Screw
	Deep Groove Ball Bearings			Cover Mounting Screw
	Material	Material	Surface Treatment	Material	Surface Treatment
ABGCB	EN 1.3505 Equiv.	EN 1.1191 Equiv.	Black Oxide	EN 1.7220 Equiv.	Black Oxide
ABGC	EN 1.3505 Equiv.	EN 1.1191 Equiv.	Electroless Nickel Plating	EN 1.4301 Equiv.	-

The Angular Contact Bearings with Housing is delivered with the parts unassembled to the holder body.
Make sure that bearing outer rings and inner rings are firmly fixed by the covers and bearing nuts before use.
1mm axial clearance is designed on each side of the deep groove bearing outer ring where the inner ring can be tightened without adjusting the length of the inner ring spacer.
A standard cover is included with the deep groove ball bearing side as a standard accessory.
For Angular Contact Bearings , please select N Standard Covers, S Oil Seal Covers or R O-Ring Covers.
Contact with O-Ring may generate some friction.

Further specifications can be found under the tab More information.
Information about tolerances can be found under ball bearing table / tolerances as PDF

Composition of a Product Code - Bearings with Housing

Part Number		-	Cover	-	L

Type	Bearing
ABGC	7005	-	R	-	100

Note: the bearing number used is included in the bearing housing part number.

General Information - Bearings with Housing

Bearing housing assortment - flange bearing - pedestal bearing T-shape - pedestal bearing L-shape - flange bearing housing - bearing housing straight - bearing with housing

Bearings with Housing/Bearing Housings/Bearing Units Selection Details

- Housing material: aluminum, steel, stainless steel

- Coatings: uncoated, burnished, anodized, nickel-plated

- Ball bearing material: steel, stainless steel

- ISO tolerances: Ball bearing table/tolerances available as PDF

- bearing housing types: round flange, square flange, compact flange, guide flange, T-shape, L-shape, block shape

- Ball bearing types: deep groove ball bearings, angular ball bearings

- Inner diameter: from 3 mm to 50 mm

The variety of bearing housings can be found in the Overview of the Types of Pedestal Bearings available as a PDF.

The different designs of the flange bearings can be found in the Overview of the Types of Flange Bearing Housing available as PDF.

Description/Basics

Bearing housings are highly robust and allow for easy and quick assembly. They are used to accommodate rotating machine elements in mechanical engineering. The housing bearings are generally provided for receiving rotary shafts or torsional shafts. Bearing housing types include pedestal bearings, flange bearings, tension bearings, and pillow blocks. They can be fitted with simple ball bearings. However, there are bearing housings in which angular contact ball bearings are installed that can also absorb axial forces. Housing bearings are available with single-row, double-row and three-row deep-groove ball bearings or angular contact ball bearings. The different designs of the bearing housings can be used horizontally or vertically. For horizontal mounting, MISUMI offers bearing housings as a vertical pedestal bearing in L- and T-shape, as well as a square bearing block. Flange bearing housings, also called flange bearings, are often used for vertical mounting. A bearing unit from MISUMI, whether a pedestal bearing or a flange bearing, is available in double or triple bearings (with rolling bearings) to absorb any lever forces.
The ball bearings are secured in the bearing housings with retaining rings or bearing covers. The bearing can thus be replaced as needed.

Two-row and multi-row bearing housings

Multi-row bearing housings are well-suited for applications subjected to lever forces. They can contribute to increased rotational stability as a flange bearing housing or a pedestal bearing housing.
The flange bearing with angular ball bearing and screwed bearing cover can be used as a fixed bearing. In this case, a floating bearing is recommended in the assembly group.
The combination of fixed and floating bearings can ensure length compensation. This prevents an undesirable compression of a shaft or a threaded drive. A compression can create an imbalance and thus vibrations in an application and lead to inaccuracy

Example of double row flange bearing - three row flange bearing - flange bearing housing with grooved ball bearing - flange bearing housing with angular ball bearing - bearing with housing

Example – multi-row bearing housing – (1) deep groove ball bearing, (2) flange bearing housing, (3) bearing cover, (4) bearing cover screw, (5) angular ball bearing, (6) spacer sleeve, (7) spacer sleeve for inner ring

Ball bearing seals for bearing housings

ZZ (2Z): double encapsulated
VV (2RZ): contactless rubber seal
DD (2RS): contact rubber seal (slightly increased friction)

Areas of Application

MISUMI’s bearing housings, flange bearings and pedestal bearings can be used in almost all applications. Bearing housings are often used as flange bearings or pedestal bearings for the bearing of ball screws and rotary shafts. In addition, they are often found in conveyor belts, or in the bearings of shafts in timing belts, as well as chain transmission. As a fixed and floating bearing, the bearing units can withstand high loads and speeds of rotation. In addition, the encapsulated or sealed bearings are protected from external influences.

Materials

Bearing unit housings are available in steel, stainless steel, and aluminum. Due to the alterations of selecting the ball bearings, a pedestal bearing housing or flange bearing housing can consist of various types of materials. The bearing housings are optionally installed with steel or stainless steel ball bearings. In addition, a bearing housing that can be used as a fixed bearing can additionally be provided on the bearing housing with a rubber seal.

Coatings

MISUMI’s pedestal bearings and flange bearings made of steel can be optionally burnished, painted, chemically nickel-plated. The aluminum bearing housings can be anodized to provide the best possible protection against corrosion depending on the need or the environmental conditions.

Dimensions

Types of pedestal bearings

Shape	Mounting method	Features
T-shape (extruded)		- economically extruded housing - up to 30% less expensive than milled housings - higher security thanks to rounded corners
T-shape		- stable despite its narrow design - available for high positioning accuracy with groove - optionally with lubricant for low particle formation
L-shape		- Low width
Block shape (internal thread)		- Fastened from underneath through the internal thread - Compact design for limited installation space
Block shape		- Low assembly height
Straight		- Fastening from the front - Compact design for limited installation space - Offset design with height accuracy +/- 0.02 mm

Table – Application of pedestal bearings

Flange bearing designs

Ball bearing	Design	utilisation
Easy		- Can be used at several shaft positions - Space-saving version available with small diameter
Easy	With centering collar	- Often used to secure multiple locations - The centering collar can be used for positioning
Double		- Suitable for heavy loads - Additional support of the shaft - Length freely selectable
Double	With centering collar	- Suitable for heavy loads - The centering collar can be used for positioning - Length freely selectable

Table – Flange Bearing Application

Instructions for Use / Installation Information - Bearings with Housing

Installation Information

When assembling bearing housings, care must be taken to ensure that they are installed without tension to prevent vibration, noise and damage. The holes or threads on the mounting surface should therefore be positioned as accurately as possible to prevent stresses on the shaft or spindle. In addition, dowel pins in the base plate can be a helpful option. Also, when installing the bearing housings, make sure that the contact surfaces are clean.
In addition, MISUMI offers special types of bearing housings, which have a positioning groove on the underside to predetermine a precise alignment.

Bearing housing assembly with dowel pin - bearing housing assembly with keyway - pedestal bearing positioning - pedestal bearing housing assembly

Application example – pedestal bearing mounting with dowel pin, pedestal bearing mounting with keyway, (1) dowel pin

The alteration [NA] allows for the bearing housings and ball bearings not to be delivered pre-assembled. This can significantly simplify assembly depending on the assembly procedure.
In some variants with angular contact bearings, the bearings must be greased during assembly.

Flange bearing housing with female thread

MISUMI offers another special form with the flange bearing with female thread. This flange bearing has the advantage that it can be mounted from the front and the rear. This flange bearing housing provides high mounting flexibility and the ability to standardize and reduce the variety of bearing housings.

Female threaded bearing housing - flange-type female threaded bearing housing - flange-type and female threaded bearing

Application example – (1) Flange bearing housing assembly with female thread, (2) flange bearing housing mounting with counterbore

Bearing housing for axial load

If high axial forces occur, MISUMI offers a special form of flange bearings in the combination of needle bearings for radial forces and axial ball bearings for axial forces.

Flange bearing housing with axial ball bearings - flange bearings with needle bearings and axial bearing - flange bearing

Application example – (1) bearing housing with needle bearing and BGCT axial ball bearing, (F) load direction

Maintenance

For bearing housings, the installed bearing can be replaced after the service life has been reached. If the bearings are pressed into the bearing housing, it is recommended to replace the bearing together with the housing. The bearing number installed in the MISUMI bearing housing is discernible from the article number of the bearing unit.
Further information about the various application of bearings can be found under the tab More Information.
Note : After determining the bearing number, you can enter it in the search window to determine the load values and specifications of the bearing for the calculation.

Application examples

Application example - flange bearing housing with angular ball bearing - flange bearing with three ball bearings - fixed bearing - bearing with housing

Application example of a flange bearing housing
(1) Collar, (2) Bearing lock nut, (3) Deep groove ball bearing, (4) Housing, (5) Rotary shaft, (6) O-ring, (7) Angular ball bearing, (8) Collar

Application example - pedestal bearing housing with conveyor belt - pedestal bearing for conveyor belt - bearing with housing

Application example of a pedestal bearing with conveyor belt
(1) Pedestal bearing, (2) Rotary shaft, (3) Conveyor belt, (4) Idler for flat belts, (5) Collar

Application example - bearing housing front mount - bearing housing straight - bearing housing with cross hole - bearing with housing

Application example of a bearing housing
(1) Bearing housing, (2) Metal washer, (3) Screw, (4) Mounting plate, (5) Nut

Application example - Flange bearing housing with clamping ring - Flange bearing with adjusting ring - Flange bearing - Flange bearing with two ball bearings

Application example of a flange bearing housing with clamping ring
(1) Flange bearing, (2) Clamping ring

Supplementary Article

Rotary shafts

Drive shafts

Bearing Lock Nuts

Washers / Collars (Metal)

Screws

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
ABGCB7004-S-100

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	Bearing I.D. d (mm)	Thickness T (mm)	Holder Surface Treatment	Bearing Part Number	Cover Type Selection	Flange Outer Dia. H (Ø)
	609.78 €	1	Available	9 Days	10	20	100	Black Oxide	7004	S (for Oil Seal)	92

Back to the Category Bearings with Housing

Technical Drawing - Bearings with Housing

Specification Tables - Bearings with Housing

Part Number		Cover Selection	L		d	D_H7		B	b₁	b₂	Deep Groove Ball Bearing No.	H	D₂	T	dh	E	D_1g6		P.C.D.	d₁	d₂	H₁
Type	Bearing No.						Tolerance											Tolerance
ABGCB (Black Oxide) ABGC (Electroless Nickel Plating)	7002	N Standard S Oil Seal R O-Ring	60	75	15	32	+ 0.025 0	9	13	20	6002ZZ	75	48	12	28	18	50	-0.009 -0.025	62	11	6.6	6.5
	7003		70	85	17	35		10	14	22	6003ZZ				31
	7004		80	100	20	42		12	16	26	6004ZZ	92	58	15	36	22	60	-0.010 -0.029	75	14	9	8.5
	7005		100	125	25	47					6005ZZ	98	63		41		65		80
	7006		120	150	30	55	+ 0.030 0	13	17	28	6006ZZ	120	78	18	48	27	80		98	17.5	11	10.5
	7007		140	175	35	62		14	18	30	6007ZZ	126	84		55		86	-0.012 -0.034	106
	7008		160	200	40	68		15	19	32	6008ZZ	140	92	20	60	30	95		116
	7009		180	225	45	75		16	20	34	6009ZZ	145	98		69		100		122
	7010		200	250	50	80					6010ZZ	147	101		74		105		124

No.	Cover Details									Cover Details										Cover Mounting Screw
	D	D₂	dh	T₁	T₂	p.c.d.	d₃	d₄	t₂	N Standard Cover	S Oil Seal Cover				R O-Ring Cover
										d₅	S₁	S₂	St	Accessory Oil Seal	Ra	Rb	Rt	r	Accessory O-Ring
7002	32	48	28	6	8	40	6.5	3.5	3.1	21	32	22	5	G20325	24	20	3.2	0.4	P20	M3-8
7003	35		31
7004	42	58	36	7	9	48	8	4.5	4.1	26	35	27	6	D25356	31	25	4.7	0.7	P25	M4-10
7005	47	63	41	8	10	53				31	40	32	7	D30407	36	30			P30
7006	55	78	48			64	9.5	5.5	5.1	41	50	42	6.5	D40506.5	41	35			P35	M5-12
7007	62	84	55	9	11	72				46	60	47	9	D45609	46	40			P40
7008	68	92	60			78	11	6.6	6.1	51	65	52		D50659	51	45			P45	M6-12
7009	75	98	69			85				56	70	57		D55709	56	50			P50
7010	80	101	74	11	13	88				61	75	62		D60759	70	60	7.5	0.8	P60	M6-15

No.	Collar Details			Inner Ring Spacer Details
No.	O.D.	I.D.	Thickness	O.D.	I.D.	Thickness (ℓ)
7002	20	15	8.5	20	15	L-38
7003	20	17	8.5	20	17	L-41
7004	25	20	9.5	25	20	L-48
7005	30	25	10.5	30	25	L-49
7006	40	30	10.5	40	30	L-52
7007	45	35	11.5	45	35	L-56
7008	50	40		50	40	L-59
7009	55	45		55	45	L-62
7010	60	50	13.5	60	50	L-64

Products homepage

Basic information

Shape	Flange Type	Bearing Used	Angular Contact Bearings, Back-to-Back Combination	Bearing Material	EN 1.3505 Equiv.
Number of Bearings	Double	Holder Material	EN 1.1191 Equiv.	Flange Shape	Round Type
Retaining Ring	Not Provided	Type	Angular Contact Bearings with Housings

This page is Bearing housings / round flange / counterbore / screwed / deep groove ball bearing, double angular contact ball bearing / steel / black oxided, nickel-plated, part number ABGCB7004-S-100.
You can find the detail information about specifications and dimensions on part number ABGCB7004-S-100.

Configure

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Type
- ABGC
- ABGCB
Clear
Bearing I.D. d(mm)
15

17

20

25

30

35

40

45

50
Clear
Thickness T(mm)
60

70

75

80

85

100

120

125

140

150

160

175

180

200

225

250
Clear
Holder Surface Treatment
- Black Oxide
- Electroless Nickel Plating
Clear
Bearing Part Number
7002

7003

7004

7005

7006

7007

7008

7009

7010
Clear
Cover Type Selection
- N (Standard Cover)
- R (for O-Ring)
- S (for Oil Seal)
Clear
Flange Outer Dia. H(Ø)
75

92

98

120

126

140

145

147
Clear
Filter by CAD data type
- 2D
- 3D
Clear