Spacer sleeves / material selectable / ground, treatment selectable (Part Numbers - CAD Download)

MISUMI

Order quantities extended (D-JIT)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog

Back to the Category Washers/Collars (metal)

Technical Drawing - Washers/Collars (metal)

Simultaneous Grind Spacers:Related Image

Available dimensions and tolerances can be found under the tab More information.

Basic Properties (e.g., material, hardness, coating, tolerance) - Washers/Collars (metal)

Type	Material	Surface Treatment	Hardness
DWSSB	EN 1.1191 Equiv.	Black Oxide	-
DWSSM	EN 1.1191 Equiv.	Electroless Nickel Plating
DWSSS	EN 1.4301 Equiv.	-
DWSSKB	EN 1.2510 Equiv.	Black Oxide	55HRC~
DWSSKM	EN 1.2510 Equiv.	Electroless Nickel Plating	55HRC~

Further specifications can be found under the tab More information.

Composition of a Product Code - Washers/Collars (metal)

Part Number	-	D	-	V	-	L
DWSSS	-	D35.5	-	V12.5	-	L58.4

General Information - Washers/Collars (metal)

Selection Details of Discs and Sleeves

- Material: steel, stainless steel, aluminum, brass, tool steel
- Coating: untreated, burnished, nickel-plated, LTBC coating, anodized, chrome-plated
- Basic shapes: straight, with collar, sleeve, disc, front panel with open oblong hole
- Designs: through hole, two through holes, bolt circle, oblong hole, counterbore, conical counterbore, internal thread
- Hardness: up to ~55HRC
- ISO tolerances: g6, h7
- Inner diameter: 0 mm to 90 mm
- Outer diameter: 3 mm to 100 mm
- Length: 1 mm to 200 mm

Overview of the various designs as PDF

Description/Basics

A spacer sleeve or distance washer serves as a spacer in mechanical engineering to maintain a predetermined position. Unlike the known washers, spacer sleeves and distance washers are not punched. Spacer sleeves, which are also known as spacer sleeves, have a precise length. Their length tolerance (precision class) is up to +/- 0.01 mm. A spacer sleeve can therefore also be used as a bearing sleeve of rolling bearings.
These metal sleeves and discs are available at MISUMI either unhardened or hardened. Particularly hard discs and sleeves have a high level of wear resistance. Stainless steel sleeves and stainless steel washers are well protected against oxidation in corrosive environments. Spacer sleeves or distance sleeves can be configured with collar (flange). The height of the government is also tolerated and can also be used for maintaining a distance.

Due to the individual configuration of the distance sleeve and spacer washer, they offer nearly an unlimited use in mechanical engineering.

Areas of Application

The spacer sleeve or distance washer is suitable for many mechanical engineering applications due to its tolerable height. Compared to the commercially available washer, the distance washer can have a larger bearing surface. The special form as a countersunk washer is well suited for shaft mounting at the shaft end.
The precisely manufactured spacer sleeve is suitable for precisely maintaining a distance between two components. If several sleeves are necessary for this, MISUMI offers simultaneous grinding spacer sleeves. Due to the matched length of the grinding distance sleeves, which are used as a set (min. 2 pieces), a flat surface can be formed. In addition, the simultaneously ground sleeves can reduce play, because the height difference from one another is limited to +/- 5μ.
Alternatively, the metal disc or the metal collar can be suitable as a spring disk in order to serve a pressure spring as a receiver or stopper.

At MISUMI, you can configure the distance washer and distance sleeve to your specifications and order it online. The additionally selectable options extend the design freedom of the metal collars and metal discs.

Materials

Metal collars and metal discs in steel, tool steel and stainless steel are available in the MISUMI online shop. Stainless steel sleeves and washers provide good corrosion resistance and can be used in corrosive environments.

Alternatively, MISUMI offers discs and sleeves made of plastic and ceramic as well as thermally insulating materials for special environmental influences.
In addition, MISUMI offers discs and sleeves made of rubber and felt, which can work with diverse properties, e.g., antistatic and vibration damping.

Coatings

MISUMI sleeves and discs are available uncoated, burnished, nickel-plated, LTBC-coated, anodized and chrome-plated versions to protect metal sleeves and metal washers from corrosion and wear.

Dimensions

Overview of the geometric variants as PDF

Standard class and precision class of the spacer sleeve

(1) Spacer sleeve – standard class, (2) spacer sleeve – precision class

Standard class and precision class of the spacer disc

(1) Spacer washer – standard class, (2) spacer washer – precision class

Application Examples - Washers/Collars (metal)

(1) Plate, (2) spacer washer, (3) screw – hexagon socket

(1) Screw, (2) metal washer, (3) metal collar, (4) natural rubber plate

(1) Spacer sleeve, (2) ball bearing, (3) rotary shaft

(1) Distance sleeve/spacer sleeve

Supplementary Article

Ball bearing

Shims

Washers / Collars (Non-Metal, Plastic)

Washers / Collars (Urethane, Rubber, Sponge, Felt)

Shoulder bolts

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
DWSSS-D12.5-V[0,2,2.6]-L[2-84/0.1]
DWSSS-D12.5-V[3-10.5/0.5]-L[2-84/0.1]
DWSSS-D13.0-V[0,2,2.6]-L[2-88/0.1]
DWSSS-D13.0-V[3-11/0.5]-L[2-88/0.1]
DWSSS-D13.5-V[0,2,2.6]-L[2-92/0.1]
DWSSS-D13.5-V[3-11.5/0.5]-L[2-92/0.1]
DWSSS-D14.0-V[0,2,2.6]-L[2-96/0.1]
DWSSS-D14.0-V[3-12/0.5]-L[2-96/0.1]
DWSSS-D14.5-V[0,2,2.6]-L[2-100/0.1]
DWSSS-D14.5-V[3-12.5/0.5]-L[2-100/0.1]
DWSSS-D15.0-V[0,2,2.6]-L[2-100/0.1]
DWSSS-D15.0-V[3-13/0.5]-L[2-100/0.1]
DWSSS-D15.5-V[0,2,2.6]-L[2-100/0.1]
DWSSS-D15.5-V[3-13.5/0.5]-L[2-100/0.1]
DWSSS-D16.0-V[0,2,2.6]-L[2-100/0.1]
DWSSS-D16.0-V[3-14/0.5]-L[2-100/0.1]
DWSSS-D16.5-V[0,2,2.6]-L[2-100/0.1]
DWSSS-D16.5-V[3-14.5/0.5]-L[2-100/0.1]
DWSSS-D17.0-V[0,2,2.6]-L[2-100/0.1]
DWSSS-D17.0-V[3-15/0.5]-L[2-100/0.1]
DWSSS-D17.5-V[0,2,2.6]-L[2-100/0.1]
DWSSS-D17.5-V[3-15.5/0.5]-L[2-100/0.1]
DWSSS-D18.0-V[0,2,2.6]-L[2-100/0.1]
DWSSS-D18.0-V[3-16/0.5]-L[2-100/0.1]
DWSSS-D18.5-V[0,2,2.6]-L[2-100/0.1]
DWSSS-D18.5-V[3-16.5/0.5]-L[2-100/0.1]
DWSSS-D19.0-V[0,2,2.6]-L[2-100/0.1]
DWSSS-D19.0-V[3-17/0.5]-L[2-100/0.1]
DWSSS-D19.5-V[0,2,2.6]-L[2-100/0.1]
DWSSS-D19.5-V[3-17.5/0.5]-L[2-100/0.1]
DWSSS-D20.0-V[0,2,2.6]-L[2-100/0.1]
DWSSS-D20.0-V[3-18/0.5]-L[2-100/0.1]
DWSSS-D20.5-V[0,2,2.6]-L[2-100/0.1]
DWSSS-D20.5-V[3-18.5/0.5]-L[2-100/0.1]
DWSSS-D21.0-V[0,2,2.6]-L[2-100/0.1]
DWSSS-D21.0-V[3-19/0.5]-L[2-100/0.1]
DWSSS-D21.5-V[0,2,2.6]-L[2-100/0.1]
DWSSS-D21.5-V[3-19.5/0.5]-L[2-100/0.1]
DWSSS-D22.0-V[0,2,2.6]-L[2-100/0.1]
DWSSS-D22.0-V[3-20/0.5]-L[2-100/0.1]
DWSSS-D22.5-V[0,2,2.6]-L[2-100/0.1]
DWSSS-D22.5-V[3-20.5/0.5]-L[2-100/0.1]
DWSSS-D23.0-V[0,2,2.6]-L[2-100/0.1]
DWSSS-D23.0-V[3-21/0.5]-L[2-100/0.1]
DWSSS-D23.5-V[0,2,2.6]-L[2-100/0.1]
DWSSS-D23.5-V[3-21.5/0.5]-L[2-100/0.1]
DWSSS-D24.0-V[0,2,2.6]-L[2-100/0.1]
DWSSS-D24.0-V[3-22/0.5]-L[2-100/0.1]
DWSSS-D24.5-V[0,2,2.6]-L[2-100/0.1]
DWSSS-D24.5-V[3-22.5/0.5]-L[2-100/0.1]
DWSSS-D25.0-V[0,2,2.6]-L[2-100/0.1]
DWSSS-D25.0-V[3-23/0.5]-L[2-100/0.1]
DWSSS-D25.5-V[0,2,2.6]-L[2-100/0.1]
DWSSS-D25.5-V[3-23.5/0.5]-L[2-100/0.1]
DWSSS-D26.0-V[0,2,2.6]-L[2-100/0.1]
DWSSS-D26.0-V[3-24/0.5]-L[2-100/0.1]
DWSSS-D26.5-V[0,2,2.6]-L[2-100/0.1]
DWSSS-D26.5-V[3-24.5/0.5]-L[2-100/0.1]
DWSSS-D27.0-V[0,2,2.6]-L[2-100/0.1]
DWSSS-D27.0-V[3-25/0.5]-L[2-100/0.1]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Shape	Inner Shape	O.D. D (mm)	I.D. (mm)	Thickness/Length (mm)	Material	Surface Treatment	O.D. Tolerance	I.D. Tolerance	Thickness/Length Tolerance	Sale Type	Dimension Specifying Method	Hardness (HRC)	Precision
-	2	10 Days	10	Straight	Straight	12.5	0	2 ～ 84	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	12.5	3 ～ 10.5	2 ～ 84	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	13	0	2 ～ 88	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	13	3 ～ 11	2 ～ 88	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	13.5	0	2 ～ 92	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	13.5	3 ～ 11.5	2 ～ 92	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	14	0	2 ～ 96	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	14	3 ～ 12	2 ～ 96	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	14.5	0	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	14.5	3 ～ 12.5	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	15	0	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	15	3 ～ 13	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	15.5	0	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	15.5	3 ～ 13.5	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	16	0	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	16	3 ～ 14	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	16.5	0	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	16.5	3 ～ 14.5	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	17	0	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	17	3 ～ 15	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	17.5	0 ～ 2.6	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	17.5	3 ～ 15.5	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	18	0	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	18	3 ～ 16	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	18.5	0 ～ 2.6	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	18.5	3 ～ 16.5	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	19	0	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	19	3 ～ 17	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	19.5	0 ～ 2.6	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	19.5	3 ～ 17.5	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	20	0	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	20	3 ～ 18	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	20.5	0 ～ 2.6	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	20.5	3 ～ 18.5	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	21	0	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	21	3 ～ 19	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	21.5	0 ～ 2.6	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	21.5	3 ～ 19.5	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	22	0	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	22	3 ～ 20	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	22.5	0	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	22.5	3 ～ 20.5	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	23	0	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	23	3 ～ 21	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	23.5	0 ～ 2.6	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	23.5	3 ～ 21.5	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	24	0	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	24	3 ～ 22	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	24.5	0 ～ 2.6	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	24.5	3 ～ 22.5	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	25	0	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	25	3 ～ 23	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	25.5	0 ～ 2.6	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	25.5	3 ～ 23.5	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	26	0	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	26	3 ～ 24	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	26.5	0 ～ 2.6	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	26.5	3 ～ 24.5	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	27	0 ～ 2.6	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade
-	2	10 Days	10	Straight	Straight	27	3 ～ 25	2 ～ 100	[Stainless Steel] EN 1.4301 Equiv.	Not Provided	0 to -0.2	+0.3 to +0.1	±0.05	Sold Separately	Dimension Configurable Type	No Hardened	Precision Grade

Back to the Category Washers/Collars (metal)

Technical Drawing - Washers/Collars (metal)

Overview of the various designs as PDF

Specification Tables - Washers/Collars (metal)

Part Number	D 0.5mm Increment	V 0.5mm Increment (V3 or More)	L		Simultaneous Grinding Maximum Quantity	Unit Price
Part Number	D 0.5mm Increment	V 0.5mm Increment (V3 or More)	Machining Conditions	0.1mm Increment	Simultaneous Grinding Maximum Quantity	DWSSB	DWSSM	DWSSS	DWSSKB	DWSSKM
DWSSB DWSSM DWSSS DWSSKB DWSSKM	4.0~10.0	0 2 2.6 3.0~8.0	L≤40 D-V≥2 40.1≤L≤50 D-V≥4	1.0~ 5.0	100 pcs.
				5.1~ 10.0
				10.1~ 25.0
				25.1~ 40.0
				40.1~ 50.0
	10.5~15.5	0 2 2.6 3.0~13.5	L≤40 D-V≥2 40.1≤L≤80 D-V≥4 80.1≤L≤100 D-V≥6	1.0~ 5.0
				5.1~ 10.0
				10.1~ 25.0
				25.1~ 40.0
				40.1~ 55.0
				55.1~ 70.0
				70.1~ 85.0
				85.1~ 100.0
	16.0~20.0	0 2 2.6 3.0~18.0	L≤40 D-V≥2 40.1≤L≤80 D-V≥4 80.1≤L≤100 D-V≥6	1.0~ 20.0	50 pcs.
				20.1~ 30.0
				30.1~ 40.0
				40.1~ 50.0
				50.1~ 60.0
				60.1~ 70.0
				70.1~ 80.0
				80.1~ 90.0
				90.1~ 100.0
	20.5~30.0	0 2 2.6 3.0~28.0	L≤50 D-V≥2 50.1≤L≤100 D-V≥6	1.0~ 20.0
				20.1~ 30.0
				30.1~ 40.0
				40.1~ 50.0
				50.1~ 60.0
				60.1~ 70.0
				70.1~ 80.0
				80.1~ 90.0
				90.1~ 100.0
	30.5~39.5	0 2 2.6 3.0~37.5	L≤50 D-V≥2 50.1≤L≤100 D-V≥6	1.0~ 20.0	20 pcs.				-	-
				20.1~ 30.0
				30.1~ 40.0
				40.1~ 50.0
				50.1~ 60.0
				60.1~ 70.0
				70.1~ 80.0
				80.1~ 90.0
				90.1~ 100.0
	40.0~50.0	0 2 2.6 3.0~48.0	L≤50 D-V≥2 50.1≤L≤100 D-V≥6	1.0~ 20.0
				20.1~ 30.0
				30.1~ 40.0
				40.1~ 50.0
				50.1~ 60.0
				60.1~ 70.0
				70.1~ 80.0
				80.1~ 90.0
				90.1~100.0
Common Machining Conditions: L≤Vx8 DWSSS(EN 1.4301 Equiv.)L≥2 Please order 2 or more pieces. No specification available for sizes without declaration of value.

Products homepage

Configure

752Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Shape
- Straight
Clear
Inner Shape
- Straight
Clear
O.D. D(mm)
4

4.5

5

5.5

6

6.5

7

7.5

8

8.5

9

9.5

10

10.5

11

11.5

12

12.5

13

13.5

14

14.5

15

15.5

16

16.5

17

17.5

18

18.5

19

19.5

20

20.5

21

21.5

22

22.5

23

23.5

24

24.5

25

25.5

26

26.5

27

27.5

28

28.5

29

29.5

30

30.5

31

31.5

32

32.5

33

33.5

34

34.5

35

35.5

36

36.5

37.0

37.5

38

38.5

39

39.5

40

40.5

41

41.5

42

42.5

43

43.5

44

44.5

45

45.5

46

46.5

47.0

47.5

48

48.5

49

49.5

50
Clear
I.D.(mm)
0

2

2.6

3

3.5
[3-48/0.5mm Unit(s)]
Clear
Thickness/Length(mm)
[1-100/0.1mm Unit(s)]
Clear
Material
- Steel
  - EN 1.1191 Equiv.
- Stainless Steel
  - EN 1.4301 Equiv.
- EN 1.2510 Equiv.
Clear
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
Clear
O.D. Tolerance
0 to -0.2
Clear
I.D. Tolerance
+0.3 to +0.1
Clear
Thickness/Length Tolerance
±0.05
Clear
Sale Type
- Sold Separately
Clear
Dimension Specifying Method
- Dimension Configurable Type
Clear
Hardness(HRC)
- 55HRC~
- No Hardened
Clear
Precision
- Precision Grade
Clear
Type
- DWSSB
- DWSSKB
- DWSSKM
- DWSSM
- DWSSS
Clear
Filter by CAD data type
- 2D
- 3D
Clear