Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!
Potvrzeno
- Thread Material
- Steel
- EN 1.0038 Equiv.
- Thread Surface Treatment
- Body Material
- Steel
- EN 1.0038 Equiv.
- Main Body Surface Treatment
- Width D(mm)
- 30
- Allowable Load (Details)(kN)
- 1.5
- Screw Length A(mm)
- 60
- Main Body Height(mm)
- 5.4
- Thread Nominal M(mm)
- 5
- Alterations
- Type
- CAD
- 2D
- 3D
- Odhadované dodací dny
- Vše
- V rámci 5 pracovních dnů
Leveling Mount / Standard (NFJN5-60)
Klepnutím na obrázek zobrazíte zvětšený náhled
- Jednotková cena (bez DPH)
- 1.58 €
- Celkem (bez DPH)
- 1.58 €Cena včetně DPH: 1.88 €
- Datum odeslání
- 5 pracovních dnůReferenční datum odeslání: 14.07.2025
| Množství | 1 - 39 | 40 - 357 | 358+ |
|---|---|---|---|
| Jednotková cena (bez DPH) (Jednotková cena včetně DPH) | 1.58 € (1.88 €) | 1.08 € (1.29 €) | 1.08 € (1.29 €) |
| Shipping days | 5 days | 5 days | Quote |
- * Informace o dnech dodání, přepravních nákladech a cenách
Obrysový výkres a tabulka specifikací
Dimensional Drawing
NFJN
NFJNS (Stainless Steel)
NFJNF
[ ! ] Screw shafts can turn and tilt 3 to 5 degrees.
[ ! ] M is coarse.
NFJNS (Stainless Steel)
NFJNF
[ ! ] Screw shafts can turn and tilt 3 to 5 degrees.
[ ! ] M is coarse.
Product Specifications
| Type | [M] Material | [S] Surface Treatment |
| NFJN | EN 1.0038 Equiv. | Trivalent Chromate |
| NFJNF | ||
| NFJNS | EN 1.4301 Equiv. | Electrolytic Polishing |
Part Number Display Method
| Part Number | — | A |
| NFJN12 NFJNF10 | — — | 100 80 |
Specification Table
■ A Dim. Selectable
■ A Dim. Configurable
[ ! ] The tip of the thread is painted.
[ ! ] 1 pc. will be delivered by ordering quantity 1.
| Part Number | L | D | (ℓ1) | (ℓ2) | E | B | t | M (Coarse) | Thread pitch | Allowable Vertical Load (kN) | Mass (g) | |
| Type | M−A | NFJN・NFJNS | ||||||||||
| NFJN NFJNS (Stainless Steel) | 5−30 | 40.5 | 30 | 3.5 | 4 | 5.4 | 8 | 1.6 | 5 | 0.8 | 1.5 | 15 |
| 5−60 | 70.5 | 19 | ||||||||||
| 6−40 | 51 | 4 | 5 | 10 | 6 | 1.0 | 2.1 | 21 | ||||
| 6−80 | 91 | 28 | ||||||||||
| 8−50 | 68.1 | 38 | 5.5 | 6.5 | 11 | 13 | 8 | 1.25 | 3.9 | 50 | ||
| 8−100 | 118.1 | 65 | ||||||||||
| 10−75 | 94.6 | 7 | 8 | 17 | 10 | 1.5 | 4.3 | 88 | ||||
| 10−100 | 119.6 | 100 | ||||||||||
| 12－50 | 78 | 60 | 8 | 10 | 18 | 19 | 2.0 | 12 | 1.75 | 4.9 | 142 | |
| 12−75 | 103 | 166 | ||||||||||
| 12−100 | 128 | 184 | ||||||||||
| 12−125 | 153 | 200 | ||||||||||
| 12−150 | 178 | 219 | ||||||||||
| 16−75 | 107 | 75 | 10 | 13 | 20 | 24 | 16 | 2.0 | 5.9 | 287 | ||
| 16−100 | 132 | 317 | ||||||||||
| 16−130 | 162 | 356 | ||||||||||
| 16−150 | 182 | 383 | ||||||||||
| 16−180 | 212 | 422 | ||||||||||
| 20−100 | 135 | 13 | 16 | 30 | 20 | 2.5 | 8.8 | 493 | ||||
| 20−130 | 165 | 557 | ||||||||||
| 20−150 | 185 | 605 | ||||||||||
| 20−180 | 215 | 671 | ||||||||||
| Part Number | A 10 mm Increments | L | D | (ℓ1) | (ℓ2) | E | B | t | Thread pitch | Allowable Vertical Load (kN) | |
| Type | M (Coarse) | ||||||||||
| NFJNF | 10 | 80 to 200 | A+19.6 | 38 | 7 | 8 | 11 | 17 | 1.6 | 1.5 | 4.3 |
| 12 | 80 to 250 | A+28 | 60 | 8 | 10 | 18 | 19 | 2.0 | 1.75 | 4.9 | |
| 16 | 80 to 300 | A+32 | 75 | 10 | 13 | 20 | 24 | 2.0 | 5.9 | ||
| 20 | 110 to 300 | A+35 | 13 | 16 | 30 | 2.5 | 8.8 | ||||
[ ! ] 1 pc. will be delivered by ordering quantity 1.
Alterations
| Part Number | — | (WC·WK·SC·WN) |
| NFJN16−75 | — | WC |
| Alteration | Square Flats | Hex Flats | Wrench Flats | Hex Wrench Socket Machining | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |  |  |  | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Code | WC | WK | SC | WN | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Spec. | Ordering Code WC [ ! ] Applicable when 20 ≥ M ≥ 10
| Ordering Code WK [ ! ] Applicable when 20 ≥ M ≥ 10
| Ordering Code SC [ ! ] Applicable when 20 ≥ M ≥ 10
| Ordering Code WN [ ! ] Applicable when 20 ≥ M ≥ 10
|
[ ! ] No plating on alteration-applied sections.
Example
Cautions / Prohibitions
- When making a selection, please select from "allowable load" and "mounting thread diameter."
- Rubber is recommended for anti-slip and anti-vibration purposes.
- The threaded section is not fixed to the pad and is designed to rotate to make it easier to adjust the height after the leveling mount is installed.
- The threaded section is slightly tilted to absorb the slope of the ground, but this does not affect the allowable vertical load.
Podrobné údaje
Základní informace
[Features] One standard levelling bracket. [Material] Available in stainless steel or steel.
Podobné produktyZobrazit všechny podobné produkty
Pro tento produkt nebyly nalezeny žádné podobné produkty. Číslo dílu bylo potvrzeno