Podmínky filtrování

[D] Diameter (Shaft)(mm)
- 20
[L] Length (Shaft)(mm)
[61–1198/1mm jednotek]
Material
Alloyed Steel
EN 1.3505 Equiv.
Heat Treatment
- Induction Hardened
Surface Treatment
- No Treatment
ISO Tolerance
- g6
Hardness
- Induction Hardening (58HRC~)
[SC] Distance (wrench flat)(mm)
[0–182/1mm jednotek]
[B] Length (thread)(mm)
[6–10/1mm jednotek]
[F] Length (stud - offset - front side)(mm)
[15–60/1mm jednotek]
[P] Diameter (stepped - front side)(mm)
[N] Size (thread - depth 2xN)(mm)
Type
- SFAZ
CAD
- 2D
- 3D
Odhadované dodací dny
- Vše
- V rámci 4 pracovních dnů

Další možnosti

[LKC] Length option (0 -1 mm increments - change of length tolerance L)
- LKC
[SX] Distance (wrench flat - second set)(mm)
[0–122/1mm jednotek]
[FC] Length (wrench flats)(mm)
[2–100/1mm jednotek]
[WFC] Length (wrench flats - double linear)(mm)
[2–100/1mm jednotek]
[A] Distance (wrench flats - front side)(mm)
- 0
[2–1196/1mm jednotek]
[E] Distance (wrench flats - back side)(mm)
- 0
[2–1196/1mm jednotek]
[WRC] Distance (90 ° wrench flats - double - front side)(mm)
[2–1184/1mm jednotek]
[PC] Diameter (undercut)(mm)
- PC
[Y] Distance (90 ° wrench flats - double - back side)(mm)
[2–1184/1mm jednotek]

MISUMI

Linear shafts / material selectable / treatment selectable / stepped on one side / external thread / internal thread / spanner flat / radial bore (SFAZ20-193-F15-B10-P12-N6-SC50)

KatalogStr. 1-143

Číslo dílu:

SFAZ20-193-F15-B10-P12-N6-SC50

Vymazat

Obrysový výkres a tabulka specifikací
Seznam čísel dílů
Podrobné údaje
Katalog

Obrysový výkres a tabulka specifikací

Back to Linear Shaft Category

Technical Drawing - Linear Shafts

One End Threaded/One End Tapped with Cross-Drilled Hole/Wrench Flats:Related Image

Basic Properties (e.g. material, hardness, coating, tolerance) - Linear Shafts

Type					Material	Hardness	Surface Treatment
With Wrench Flats			With Cross-Drilled Hole
D Tol. g6	D Tol. h5	D Tol. f8	D Tol. g6	D Tol. f8
SFAZ	SFZU	-	SFZH	-	EN 1.3505 Equiv.	Effective Hardened Depth of Induction Hardening >>P.112 EN 1.3505 Equiv. 58HRC~ EN 1.4037 Equiv. 56HRC~	-
SSFAZ	SSFZU	-	SSFZH	-	EN 1.4037 Equiv.		-
PSFAZ	PSFZU	-	PSFZH	-	EN 1.3505 Equiv.		Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 5µ or More
PSSFAZ	PSSFZU	-	PSSFZH	-	EN 1.4037 Equiv.
RSFAZ	-	-	RSFZH	-	EN 1.3505 Equiv.		LTBC Plating
-	-	PSGGZ	-	PSGZH	EN 1.1191 Equiv.	-	Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 10µ or More
-	-	PSSGGZ	-		EN 1.4301 Equiv.	-

Part Number			1mm Increment			P (Coarse) Selection											N (Coarse) Selection											Wrench Flats Dimensions			D Tol.			(Y)Max.	R	C
Type		D	L	F	B	P (Coarse) Selection											N (Coarse) Selection											SC	W	ℓ₁	g6	h5	f8	(Y)Max.	R	C
(With Wrench Flats) (D Tolerance g6) SFAZ SSFAZ PSFAZ PSSFAZ (D Tol. f8)PSGGZ PSSGGZ	(D Tolerance h5) SFZU SSFZU PSFZU PSSFZU	6	25~598	2≤F≤Px5	(When P≤6) B≤F-2 (When P=8, 10) B≤F-3 (When P≥12) B≤F-5 (W/o Threads) B=0 B≥Pitchx3	3	4	5	6								3											SC=1mm Increment SC+ℓ₁≤L SC≥0 Details of Wrench Flats >>P.112	5	8	-0.004 -0.012	0 -0.005	-0.010 -0.028	600	0.3 or Less	0.5 or Less
		8	25~798			3	4	5	6	8							3	4	5										7	8	-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		10	25~798				4	5	6	8	10						3	4	5	6									8	8	-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		12	25~998					5	6	8	10	12						4	5	6	8								10	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		13	25~998					5	6	8	10	12						4	5	6	8								11	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		15	25~998					5	6	8	10	12						4	5	6	8	10							13	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		16	25~1198					5	6	8	10	12	16					4	5	6	8	10							14	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		18	25~1198					5	6	8	10	12	16					4	5	6	8	10	12						16	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		20	25~1198						6	8	10	12	16	20				4	5	6	8	10	12						17	10	-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		25	25~1198							8	10	12	16	20	24			4	5	6	8	10	12	16					22	10	-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		30	25~1498							8	10	12	16	20	24	30				6	8	10	12	16	20				27	15	-0.007 -0.020	0 -0.009	-0.020 -0.053	1500	0.3 or Less	1.0 or Less
		35	25~1498								10	12	16	20	24	30					8	10	12	16	20	24			30	15	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		40	40~1498									12	16	20	24	30						10	12	16	20	24	30		36	20	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		50	50~1498										16	20	24	30							12	16	20	24	30		41	20	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less

Part Number		1mm Increment			P (Coarse) Selection											N (Coarse) Selection									Cross-Drilled Hole Dimensions		D Tol.		(Y)Max.	R	C
Type	D	L	F	B	P (Coarse) Selection											N (Coarse) Selection									H	d	g6	f8	(Y)Max.	R	C
(With Cross-Drilled Hole) (D Tolerance g6) SFZH SSFZH PSFZH PSSFZH RSFZH (D Tolerance f8) PSGZH	8	25~500	2≤F≤Px5	(When P≤6) B≤F-2 (When P=8, 10) B≤F-3 (When P≥12) B≤F-5 (W/o Threads) B=0 B≥Pitchx3	3	4	5	6	8							3	4	5							H=1mm Increment L≥H+d/2+6+Nx2.5 H≥d/2+2	3	-0.005 -0.014	-0.013 -0.035	800	0.3 or Less	0.5 or Less
	10	25~500				4	5	6	8	10						3	4	5	6							3	-0.005 -0.014	-0.013 -0.035	800	0.3 or Less	0.5 or Less
	12	25~500					5	6	8	10	12						4	5	6	8						3	-0.006 -0.017	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
	13	25~500					5	6	8	10	12						4	5	6	8						4	-0.006 -0.017	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
	15	25~500					5	6	8	10	12						4	5	6	8	10					4	-0.006 -0.017	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
	16	25~500					5	6	8	10	12	16					4	5	6	8	10					4	-0.006 -0.017	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
	18	25~500					5	6	8	10	12	16					4	5	6	8	10	12				6	-0.006 -0.017	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
	20	25~500						6	8	10	12	16	20				4	5	6	8	10	12				6	-0.007 -0.020	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
	25	25~500							8	10	12	16	20	24			4	5	6	8	10	12	16			7	-0.007 -0.020	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
	30	25~500							8	10	12	16	20	24	30				6	8	10	12	16	20		7	-0.007 -0.020	-0.020 -0.053	1500	0.3 or Less	1.0 or Less

Part Number		1mm Increment			P (Coarse) Selection											N (Coarse) Selection									Wrench Flats Dimensions			D Tol.	(Y)Max.	R	C
Type	D	L	F	B	P (Coarse) Selection											N (Coarse) Selection									SC	W	ℓ₁	g6	(Y)Max.	R	C
(With Wrench Flats) (D Tolerance g6) LTBC Plating RSFAZ	6	25~500	2≤F≤Px5	(When P≤6) B≤F-2 (When P=8, 10) B≤F-3 (When P≥12) B≤F-5 (W/o Threads) B=0 B≥Pitchx3	3	4	5	6								3									SC=1mm Increment SC+ℓ₁≤L SC≥0 Details of Wrench Flats >>P.112	5	8	-0.004 -0.012	600	0.3 or Less	0.5 or Less
	8	25~500			3	4	5	6	8							3	4	5								7	8	-0.005 -0.014	800	0.3 or Less	0.5 or Less
	10	25~500				4	5	6	8	10						3	4	5	6							8	8	-0.005 -0.014	800	0.3 or Less	0.5 or Less
	12	25~500					5	6	8	10	12						4	5	6	8						10	10	-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	13	25~500					5	6	8	10	12						4	5	6	8						11	10	-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	15	25~500					5	6	8	10	12						4	5	6	8	10					13	10	-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	16	25~500					5	6	8	10	12	16					4	5	6	8	10					14	10	-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	18	25~500					5	6	8	10	12	16					4	5	6	8	10	12				16	10	-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	20	25~500						6	8	10	12	16	20				4	5	6	8	10	12				17	10	-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	25	25~500							8	10	12	16	20	24			4	5	6	8	10	12	16			22	10	-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	30	25~500							8	10	12	16	20	24	30				6	8	10	12	16	20		27	15	-0.007 -0.020	1500	0.3 or Less	1.0 or Less

Overall length L requires Nx3≤L. When D=P, specify F=B as B dimensions. However, L and F dimensions have manufacturing priority and B dimension of the product will be F -(Pitchx2).

Further specifications can be found under the tab More Information.

Composition of a Product Code - Linear Shafts

Part Number	-	L	-	F	-	B	-	P	-	N	-	SC	-	H
SFAZ20 SSFZH20	- -	277 277	- -	F25 F25	- -	B12 B12	- -	P10 P10	- -	N12 N12	-	SC10	-	H10

Alterations - Linear Shafts

One End Threaded/One End Tapped with Cross-Drilled Hole/Wrench Flats:Related Image

You find further options in detail under Option Overview.

Seznam čísel dílů

Počet položek

Číslo dílu

SFAZ20-193-F15-B10-P12-N6-SC50

[D] Diameter (Shaft)

(mm)

[L] Length (Shaft)

(mm)

Material

Heat Treatment

Surface Treatment

ISO Tolerance

Hardness

[SC] Distance (wrench flat)

(mm)

[B] Length (thread)

(mm)

[NSC] Size (fine thread - depth 2xN)

(mm)

[ND] Size (thread - depth 3xN)

(mm)

[F] Length (stud - offset - front side)

(mm)

[PMC] Size (fine thread)

(mm)

[PMS] Size (fine thread)

(mm)

[H]

(mm)

[P] Diameter (stepped - front side)

(mm)

[N] Size (thread - depth 2xN)

(mm)

RoHS?

Minimální objednací množství

193

[Alloyed Steel] EN 1.3505 Equiv.

Induction Hardened

No Treatment

Induction Hardening (58HRC~)

1 kusů

Jednotková cena (bez DPH)(Jednotková cena včetně DPH)	Standardní datum odeslání

( - )

4 pracovních dnů

Základní informace

Pozor

SFAZ has been localized according to European needs and requirements. Please have a look on the EU version SFAZEU. SFAZEU is available in EN 1.1213 (Cf53) and h6 / h7.

Technické údaje

Náčrt a specifikace

Back to Linear Shaft Category

Technical Drawing - Linear Shafts

Specification Tables - Linear Shafts

Overview of the shaft designs as PDF

Coarse Thread Dimension
M	pitch
3	0.5
4	0.7
5	0.8
6	1.0
8	1.25
10	1.5
12	1.75
16	2.0
20	2.5
24	3.0
30	3.5

Overall length L requires Nx3≤L. When D=P, specify F=B as B dimensions. However, L and F dimensions have manufacturing priority and B dimension of the product will be F -(Pitchx2).

Alterations - Linear Shafts

One End Threaded/One End Tapped with Cross-Drilled Hole/Wrench Flats:Related Image

You find further options in detail under Option Overview.

Katalog

Products homepage

Katalog (rozvržení na 2 stránky)