D-sub Connector Panel Mounting Accessory (Dedicated for Gender Changer)

Click on this image to zoom in.

Volume Discount

[Specifications]·An accessory that can be mounted on panels with a thickness of 2.3 mm · Compatible with 9- and 25-core cables commonly used in RS232C communication.

● Accessory can mount a gender changer to panels
● Supports both general purpose 9-core and 25-core through RS-232C communication

● Supports up to 2.3 mm panel thickness

· Depending on hood type, 2.3 mm panel thickness may not be supported.
· The gender changer in the product photo is not included.
· Refer to the following outer diameter drawing for panel cut dimensions. In addition, cut dimensions vary depending on the number of cores.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Product specification
Part Numbers
Example
Standard Specifications

Specification Table

Model	Supported Number of Cores ( ) is High Density Type	Weight g

DGC-9-HOLD	9 (15)	6
DGC-25-HOLD	25	7

Overview of Specifications

Material/Finishing

Item	Quantity	Material
Resin Plate	2	ABS Resin, Black
M3 SEMS Screw 15 mm (Effective Screw Length Approx. 13 mm)	2	Iron, Nickel Plating
M3 Nut	2	Iron, Nickel Plating

Data to be displayed: 30; 45; 60

Part Number
DGC-9-HOLD
DGC-25-HOLD

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	Number of Cores (Core)
	3.81 €	2	Available	5 Days	10	9 (15)
	7.41 €	1	Available	5 Days	10	25

Usage Example

D-sub Connector Panel Mounting Accessory (Dedicated for Gender Changer): Related Image

Compatible Wire Size

Connector Type		Compatible Wire Size
Connector Type		AWG Size	Conductor Cross-Sectional Area (mm2)
Solder Connection Type		Finer than 20	Less than 0.53
Pressure Weld Connection Type		1.27 mm Pitch 28 Flat Cable	−
High-density Solder Connection Type		22 ~ 28	0.08 ~ 0.32
Terminal Block Built in Type		14 ~ 26	2.0 ~ 1.5
High Current Type	For 10A	16 ~ 12	0.3 ~ 1.25
High Current Type	For 20A	12 ~ 18	0.75 ~ 3.5

・ When mounting a hood, the wires in the table at left may not be usable, depending on the cable extraction port diameter. Use with due attention to the cable finished outer diameter, etc.