Potvrzeno
- Outer Diameter (D)(φ)
- 4.96
- Flute Length (ℓ)(mm)
- 10
- Shank Diameter (d)(mm)
- 6
- Overall Length (L)(mm)
- 45
- Processing Applications
- Geometry
- Additional Classification
- Type
- Odhadované dodací dny
- Vše
- V rámci 7 pracovních dnů
Carbide square end mill, 2-flute / 2D Flute Length (short) model (SEC-EM2S4.96)
Obrysový výkres
Podrobné údaje
Základní informace
Excellent in general versatility, it is a 2D flute length type that can be used in a wide range of applications
Specifikace a cena
Specifications
Model Number
SEC-EM2S (Standard) / SEC-PEM2S (Sharp Edge)
| Outer Diameter D |
Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | ● Stocked Product □ Manufactured Product |
| 0.2 | 0.4 | 35 | 3 | 1 | ● |
| 0.4 | 0.8 | 35 | 3 | 1 | ● |
| 0.5 | 1 | 35 | 3 | 1 | ● |
| 0.8 | 1.6 | 35 | 3 | 1 | ● |
| 1 | 2 | 40 | 4 | 1 | ● |
| 1.2 | 2.4 | 40 | 4 | 1 | ● |
| 1.5 | 3 | 40 | 4 | 1 | ● |
| 1.8 | 3.6 | 40 | 4 | 1 | ● |
| 1.91 ~ 1.99 | 4 | 40 | 4 | 1 | □ (Standard Only) |
| 2 | 4 | 40 | 4 | 1 | ● |
| 2.25 ~ 2.49 | 5 | 40 | 4 | 1 | □ (Standard Only) |
| 2.5 | 5 | 40 | 4 | 1 | ● |
| 2.81 ~ 2.99 | 6 | 45 | 6 | 1 | □ (Standard Only) |
| 3 | 6 | 45 | 6 | 1 | ● |
| 3.01 ~ 3.49 | 7 | 45 | 6 | 1 | □ |
| 3.5 | 7 | 45 | 6 | 1 | ● |
| 3.51 ~ 3.99 | 8 | 45 | 6 | 1 | □ |
| 4 | 8 | 45 | 6 | 1 | ● |
| 4.51 ~ 4.99 | 10 | 45 | 6 | 1 | □ |
| 5 | 10 | 45 | 6 | 1 | ● |
| 5.51 ~ 5.99 | 12 | 45 | 6 | 1 | □ |
| 6 | 12 | 45 | 6 | 2 | ● |
| 7.01 ~ 7.99 | 16 | 55 | 8 | 1 | □ |
| 8 | 16 | 55 | 8 | 2 | ● |
| 9.01 ~ 9.99 | 20 | 65 | 10 | 1 | □ |
| 10 | 20 | 65 | 10 | 2 | ● |
| 11.01 ~ 11.99 | 24 | 75 | 12 | 1 | □ |
| 12 | 24 | 75 | 12 | 2 | ● |
[ ! ]Outer diameters of manufactured products are designated in 0.01 mm increments
For Cutting Conditions, Refer to >>Click here.
Funkce a příklady používání
More Information
● A general-purpose 2-flute end mill for a wide range of applications.
● Delivers a finish with very good working surface roughness after machining.
Číslo dílu bylo potvrzeno