Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Podmínky filtrování
  • Outer Diameter (D)(φ)
  • R Size(mm)
  • Flute Length (ℓ)(mm)
  • Overall Length (L)(mm)
  • Shank Diameter (d)(mm)
  • Length Under Neck (ℓ1)(mm)
  • Odhadované dodací dny
    • Vše
    • V rámci 5 pracovních dnů

TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model

TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model

Přesunutím myši nad obrázek ho zvětšíte

Číslo dílu:

Nebyly nalezeny žádné nevyřízené. 5 návrhy.
Množství:

Obrysový výkres

 TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model:Related Image

Seznam čísel dílů

Počet položek

Outer Diameter (D)

(φ)

R Size

(mm)

Flute Length (ℓ)

(mm)

Overall Length (L)

(mm)

Shank Diameter (d)

(mm)

Length Under Neck (ℓ1)

(mm)

Figure

Shoulder Radius R1

(mm)

Base Radius R2

(mm)

Approximate R-Value

(mm)

Under Neck Diameter d1

(mm)

Minimální objednací množství
4
0.813
8
80
6
35
1
0.5
4
0.813
3.8
1 kusů
6
1.219
10
120
6
70
1
0.5
9
1.219
5.7
1 kusů
8
1.625
16
135
8
85
2
1
12
1.625
7.6
1 kusů
10
2.031
20
150
10
100
2
1.5
15
2.031
9.5
1 kusů
12
2.438
24
160
12
108
2
1.5
18
2.438
11.5
1 kusů
Jednotková cena (bez DPH)(Jednotková cena včetně DPH)
Standardní datum odeslání
96.97 €
(
115.39 €
)
5 pracovních dnů
133.19 €
(
158.50 €
)
5 pracovních dnů
102.25 €
(
121.68 €
)
5 pracovních dnů
196.98 €
(
234.41 €
)
5 pracovních dnů
262.37 €
(
312.22 €
)
5 pracovních dnů

Podrobné údaje

Základní informace

[Features]
-Combined corner radius shape of shoulder R and bottom R, (1) cutting chips are thin when bottom face is milled, enabling high-speed feed (2) minimizing cusp height (uncut part) during contour milling reduces the number of middle finishing operations
-Long neck type, which avoids tool interference, achieves high efficiency even when milling deep cavities.

Specifikace a cena

Specifications

TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model:Related Image

Model Number
TSC-MCR-LS-HFEM4S (4 Flutes)

Outer Diameter
D
Shoulder
Radius
R1
Base
Radius
R2
Approximate R-Value Flute Length
Under Neck Diameter
d1
Length Under Neck
ℓ1
Overall Length
L
Shank Diameter
d
Figure
4 0.5 4 0.813 8 3.8 35 80 6 1
6 0.5 9 1.219 10 5.7 70 120 6 1
8 1 12 1.625 16 7.6 85 135 8 2
10 1.5 15 2.031 20 9.5 100 150 10 2
12 1.5 18 2.438 24 11.5 108 160 12 2



For Cutting Conditions, Refer to >>Click here.

Funkce a příklady používání

More Information


The shoulder R and base R composite radius eliminate the medium finishing process by (1), enabling high-speed feeding due to thin chippings when bottom-surface machining, and by (2), minimizing the cusp height (leftover) when machining lines at the same height.
The long neck models not only avoid tool interference, but can also achieve increased efficiency when machining deep grooves.
The TS coating consisting of a nitride-based composite film with a fully crystalline structure means that it yields a high oxidation resistance temperature and high hardness. Ideal for high speed machining and dry machining of anything from raw carbon steel materials to heat-treated / high hardness steel.
[ ! ]This product has a special groove shape with a performance that may not be reproducible without the use of Misumi's dedicated re-grinding.


TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model:Related Image