- Outer Diameter (D)(φ)
- 6
- Flute Length (ℓ)(mm)
- 18
- Number of Flutes(sheet)
- 4
- Processing Applications
- Shank Diameter (d)(mm)
- 6
- Overall Length (L)(mm)
- 60
- Type
- Odhadované dodací dny
- Vše
- V rámci 9 pracovních dnů
Carbide 2 / 4-Flute Square Alterations End Mill (T-SEC-EM4R6)
Obrysový výkres
Podrobné údaje
Specifikace a cena
Specification Table
Blade Tip Shape Specification -CR/-CC/-MK/-EF
| Blade Diameter D (Selection) | -CR/-CC 0.1 mm Unit Specification | -MK 1° Unit Specification |
| 2, 2.5, 2.8 | 0.1 to 0.5 | No Standard |
| 3, 3.5 | 0.1 to 0.7 | |
| 4, 4.5 | 0.1 to 1.0 | |
| 5, 5.5 | 0.1 to 1.0 | |
| 6 | 0.1 to 1.2 | 60° to 160° |
| 8 | 0.1 to 1.4 | |
| 10 | 0.1 to 3.0 | |
| 12 | 0.1 to 3.0 |
[ ! ] Bottom blade polishing is provided when machining the radius, corner C, and bottom blade flat.
[ ! ] The blade length (ℓ) and overall length (L) will be shorter by about D×0.5 (up to 5 mm) when blade tip shape machining is performed.
Click here for cutting conditions
Blade Diameter Specification -PP
| Nominal No. | -PP 0.01 mm Unit Specification |
| 2 | 1.90 to 1.99 |
| 2.5 | 2.25 to 2.49 |
| 2.8 | 2.51 to 2.79 |
| 3 | 2.70 to 2.99 |
| 3.5 | 3.01 to 3.49 |
| 4 | 3.51 to 3.99 |
| 4.5 | 4.01 to 4.49 |
| 5 | 4.51 to 4.99 |
| 5.5 | 5.01 to 5.49 |
| 6 | 5.51 to 5.99 |
| 8 | 7.01 to 7.99 |
| 10 | 9.01 to 9.99 |
| 12 | 11.01 to 11.99 |
Click here for cutting conditions
Shank Additional Work -KN / -LC
| Blade Diameter D (Selection) | Under-Neck Length Specification -KN 1 mm Unit Specification | Overall Length Specification -LC 1 mm Unit Specification | Fig. |
| 2 | ℓ+5≤KN ≤ ℓ+10 | LC ≥ ℓ+10+3d | 1 |
| 2.5 | |||
| 2.8 | |||
| 3 | |||
| 3.5 | |||
| 4 | ℓ+5≤KN ≤ ℓ+15 | ||
| 4.5 | |||
| 5 | |||
| 5.5 | |||
| 6 | 2 | ||
| 8 | |||
| 10 | |||
| 12 | LC ≥ ℓ+D+3d |
[ ! ] For the standards of blade length (ℓ), overall length (L) and shank diameter (d), refer to the target model number page.
[ ! ] Specify within the range of LC ≥ KN+3d+5 when using both the under-neck length (KN) and overall length (LC) specifications.
[ ! ] When specifying the under-neck length (KN), the blade diameter of the shank relief will be −0.2 to 0.5 mm.
Click here for cutting conditions
■ Additional machining charges will be added to the unit price of the target model number.
■ When additional machining menus are combined, the respective additional machining charges will be added.
■ The quantity slide is applicable only to the target model number.
(Depending on the quantity, an estimate may be provided for the delivery date)
Funkce a příklady používání
Specifications/Overview
| Applicable Model Number | Blade length ℓ | |
| SEC−EM2S | 2D | Click here for product details |
| SEC−EM2R | 3D | Click here for product details |
| SEC−EM4S | 2D | Click here for product details |
| SEC−EM4R | 3D | Click here for product details |
Not applicable for sharp corner type.
Další možnosti a povrchová úprava
Alterations
