• Značky
  • Firma
  • Kontakt
CS
Type Code Seach | *NOT READY*
#CODE
Návrhy klíčových slov
Návrhy čísel dílů
Discontinued Products

Plain bearing bushes with flange / plastic (iglidur) / XFM (XFM-1214-17)

Plain bearing bushes with flange / plastic (iglidur) / XFM XFM-1214-17
  • Promotional pricing ends 30/11/2024
  • Volume Discount

IGUS

IGUS

Product Details:

Manufacturer part number: XFM-1214-17

Brand: IGUS

Price: 8.90 €

Delivery time: 3 Days


Technical Data:

Type: -

Inner Diameter d1: 12 mm

O.D. d2: 14 mm

Overall Length b1: 15 mm

Maximum Allowable PV Value Range: - N/mm2•m/s


Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

XFM-1214-17

iglidur® X | The Chemical and Temperature Specialist, Flange Bearing (Form F)

Product Information


Up to 150 MPa static
iglidur® X is defined by its combination of high temperature resistance with compressive strength, along with high resistance to chemicals. iglidur® X is designed for higher speeds than other iglidur® bearings.
When to use it?
• For pressure loads up to 150 MPa
• For linear movements with stainless steel at high temperatures
• Universal resistance to chemicals
• Temperature resistant from –100 °C to +250 °C in continuous operation (short-term to +315 °C)
• Very low moisture absorption
• High wear resistance over the entire temperature range
When not to use it?
• For very low wear at high loads
   ►iglidur® Q
   ►iglidur® Z
• For economical underwater applications
   ►iglidur® H
   ►iglidur® H370
• For edge pressure
   ►iglidur® Z
Typical application areas
• Beverage technology
• Woodworking
• Plastic processing industry
• Aerospace engineering
• Cleanroom

Material Properties

General propertiesUnitiglidur® XTesting method
Densityg/cm31.44 
Colour black 
Max. moisture absorption at +23 °C/50 % r.h.% weight0.1DIN 53495
Max. water absorption% weight0.5 
Coefficient of sliding friction, dynamic, against steelμ0.09–0.27 
pv value, max. (dry)MPa · m/s1.32 
Mechanical properties
Flexural modulusMPa8,100DIN 53457
Flexural strength at +20 °CMPa170DIN 53452
Compressive strengthMPa100 
Max. recommended surface pressure (+20 °C)MPa150 
Shore-D hardness 85DIN 53505
Physical and thermal properties
Max. long-term application temperature°C+250 
Max. short-term application temperature°C+315 
Min. long-term application temperature°C–100 
Heat conductivityW/m · K0.6ASTM C 177
Coefficient of thermal expansion (at +23 °C)K–1 · 10–55DIN 53752
Electrical properties5)
Specific contact resistanceΩcm< 105DIN IEC 93
Surface resistanceΩ< 103DIN 53482
5) The good conductivity of this plastic material under certain circumstances can favour the generation of corrosion on the metallic contact components.

Dimensions

Flange Bearing (Form F)

2) Thickness < 1 mm: chamfer = 20°
 
Chamfer in relation to the d1
d1 [mm]:Ø 1–6Ø 6–12Ø 12–30Ø > 30
f [mm]:0.30.50.81.2



Dimensions [mm]
d1d1-d2d3b1b2Part No.
 Tolerance3) d13h13–0.14 
2.0+0.006
+0.046		4.06.03.01.0XFM-020406-03
3.04.57.55.00.75XFM-0304-05
4.0+0.010
+0.058		5.59.54.00.75XFM-0405-04
4.05.59.56.00.75XFM-0405-06
4.05.58.06.00.75XFM-040508-06
5.07.011.05.01.0XFM-0507-05
6.08.012.04.01.0XFM-0608-04
6.08.012.08.01.0XFM-0608-08
6.08.012.010.01.0XFM-0608-10
8.0+0.013
+0.071		10.015.05.51.0XFM-0810-05
8.010.015.07.51.0XFM-0810-07
8.010.015.08.01.0XFM-0810-08
8.010.015.09.01.0XFM-0810-09
8.010.012.04.01.0XFM-081012-04
8.010.014.031.51.0XFM-081014-31
9.011.015.018.00.5XFM-0911-18
10.012.018.05.01.0XFM-1012-05
10.012.018.06.01.0XFM-1012-06
10.012.018.07.01.0XFM-1012-07
10.012.015.08.01.0XFM-1012-08
10.012.018.09.01.0XFM-1012-09
10.012.018.012.01.0XFM-1012-12
10.012.018.015.01.0XFM-1012-15
10.012.018.017.01.0XFM-1012-17
10.012.018.018.01.0XFM-1012-18
10.012.015.022.01.0XFM-1012-22
10.012.018.025.01.0XFM-1012-25
12.0+0.016
+0.086		14.020.05.51.0XFM-1214-055
12.014.020.07.01.0XFM-1214-07
12.014.020.09.01.0XFM-1214-09
12.014.020.012.01.0XFM-1214-12
12.014.020.015.01.0XFM-1214-15
12.014.020.017.01.0XFM-1214-17
12.014.018.03.91.0XFM-121418-039
12.0+0.016
+0.086		14.018.05.91.0XFM-121418-059
14.016.022.010.01.0XFM-1416-10
14.016.022.012.01.0XFM-1416-12
14.016.022.017.01.0XFM-1416-17
15.017.023.06.01.0XFM-1517-06
15.017.023.09.01.0XFM-1517-09
15.017.023.012.01.0XFM-1517-12
15.017.023.017.01.0XFM-1517-17
16.018.024.012.01.0XFM-1618-12
16.018.024.017.01.0XFM-1618-17
18.020.026.012.01.0XFM-1820-12
18.020.026.017.01.0XFM-1820-17
18.020.026.022.01.0XFM-1820-22
20.0+0.020
+0.104		23.030.06.51.5XFM-2023-065
20.023.030.07.51.5XFM-2023-075
20.023.030.011.01.5XFM-2023-11
20.023.030.016.51.5XFM-2023-16
20.023.030.021.01.5XFM-2023-21
25.028.035.011.51.5XFM-2528-11
25.028.035.013.51.5XFM-2528-13
25.028.035.016.51.5XFM-2528-16
25.028.035.021.01.5XFM-2528-21
25.028.033.08.01.0XFM-252833-08
27.030.038.020.01.5XFM-2730-20
30.034.042.016.02.0XFM-3034-16
30.034.042.026.02.0XFM-3034-26
30.034.042.040.02.0XFM-3034-40
32.0+0.025
+0.125		36.045.015.02.0XFM-3236-15
32.036.045.026.02.0XFM-3236-26
35.039.047.016.02.0XFM-3539-16
35.039.047.026.02.0XFM-3539-26
40.044.052.022.02.0XFM-4044-22
40.044.052.030.02.0XFM-4044-30
40.044.052.040.02.0XFM-4044-40
45.050.058.050.02.0XFM-4550-50
50.055.063.040.02.0XFM-5055-40
60.0+0.030
+0.150		65.073.040.02.0XFM-6065-40
70.075.083.040.02.0XFM-7075-40
75.080.088.050.02.0XFM-7580-50
3) After press-fit.
Data to be displayed
30
45
60
  1. 1
Part Number
XFM-1214-17
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSType Inner Diameter d1
(mm) 		O.D. d2
(mm) 		Overall Length b1
(mm) 		Maximum Allowable PV Value Range
(N/mm2•m/s) 		Max. Allowable Velocity V
(m/s) 		Recommended Shaft Tolerance Thickness t
(mm) 		Operating Temperature Range
(°C) 		Flange Outer Diameter d3
(mm)

8.90 €

1 Available 3 Days 10-121415-10-1--

Loading...

  1. 1
 

Basic information

Resin Group High Performance Polymer Group Environment Standard / Heat Resistant / Foreign Object Resistant / Vibration Resistant / In Oil / In Water / In Seawater / In Chemical Maximum Allowable PV Value(N/mm²·m/s) 1.32
Max. Allowable Surface Pressure P(N/mm2) 150 Recommended Housing Hole Tolerance H7 Lubrication Condition Unlubricated

This page is Plain bearing bushes with flange / plastic (iglidur) / XFM, part number XFM-1214-17.
You can find the detail information about specifications and dimensions on part number XFM-1214-17.

Configure

Clear all

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Type

    • Flanged Type

    Clear

  • Maximum Allowable PV Value Range(N/mm2•m/s)

    • 1.1 to 2.0

    Clear

  • Recommended Shaft Tolerance

    • h9

    Clear

  • Flange Outer Diameter d3(mm)

    • 6
    • 7.5
    • 8
    • 9.5
    • 11
    • 12
    • 14
    • 15
    • 18
    • 20
    • 22
    • 23
    • 24
    • 26
    • 30
    • 33
    • 35
    • 38
    • 42
    • 45
    • 52
    • 58
    • 63
    • 73
    • 83
    • 88

    Clear

  • Type

    • XFM

    Clear

  • Inner Diameter d1(mm)

    • 2
    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 14
    • 15
    • 16
    • 18
    • 20
    • 25
    • 27
    • 30
    • 32
    • 35
    • 40
    • 45
    • 50
    • 60
    • 70
    • 75

    Clear

  • O.D. d2(mm)

    • 4
    • 4.5
    • 5.5
    • 7
    • 8
    • 10
    • 12
    • 14
    • 16
    • 17
    • 18
    • 20
    • 23
    • 28
    • 30
    • 34
    • 36
    • 39
    • 44
    • 50
    • 55
    • 65
    • 75
    • 80

    Clear

  • Overall Length b1(mm)

    • 3
    • 3.9
    • 4
    • 5
    • 5.5
    • 5.9
    • 6
    • 7.5
    • 8
    • 9
    • 10
    • 11
    • 12
    • 13.5
    • 15
    • 16
    • 16.5
    • 17
    • 18
    • 20
    • 21
    • 22
    • 26
    • 30
    • 31.5
    • 40
    • 50

    Clear

  • Max. Allowable Velocity V(m/s)

    • 1.5
    • 10

    Clear

  • Thickness t(mm)

    • 1
    • 1.5
    • 2
    • 2.5

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • Same day
    • 2 Days or Less
    • 3 Days or Less
    • 4 Days or Less
    • 5 Days or Less

    Reset

Optional Attributes

Variation of this product

Part Number
XFM-0405-06
XFM-040508-06
XFM-0507-05
XFM-121418-039
XFM-121418-059
XFM-1416-10
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountStandard
Shipping Days
?		RoHSType Inner Diameter d1
(mm) 		O.D. d2
(mm) 		Overall Length b1
(mm) 		Maximum Allowable PV Value Range
(N/mm2•m/s) 		Max. Allowable Velocity V
(m/s) 		Recommended Shaft Tolerance Thickness t
(mm) 		Operating Temperature Range
(°C) 		Flange Outer Diameter d3
(mm)

6.84 €

1 Available Same day

Stock

10Flanged Type45.561.1 to 2.01.5h9--100～2509.5

6.74 €

1 Available 2 Days 10Flanged Type45.561.1 to 2.01.5h9--100～2508

6.94 €

1 Available Same day

Stock

10Flanged Type5751.1 to 2.01.5h9--100～25011

7.54 €

1 Available Same day

Stock

10Flanged Type12143.91.1 to 2.01.5h91-100～25018

7.52 €

1 Available 3 Days 10Flanged Type12145.91.1 to 2.01.5h91-100～25018

8.00 €

1 Available 3 Days 10Flanged Type1416101.1 to 2.01.5h91-100～25022

Tech Support

Technical Inquiry

Způsob platby

Platba na účet

Zálohová platba

PayPal

Výroba na vyžádání

Změnit zobrazení

Certifikáty

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI ve světě

Sociální média

Právní upozornění

Copyright © MISUMI Corporation Všechna práva vyhrazena.