Corner hinges, plug-in / internal thread / Zinc / GN 161.1 / GANTER
- Volume Discount
Hinges GN 161.1 are a variant with highly attractive design. The fixing screws are invisible.
During the load tests, the hinges were gradually loaded and relieved at room temperature with incrementally increasing force.
For the specified values, an insignificant permanent deformation remained after relieving the load which had no effect on the function and appearance. In most cases, the failure loads are multiples of the specified value.
The details relating to the load bearing capacity are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition.
The user must determine from case to case whether a product is suitable for the intended use. Environmental influences and aging may influence these values.
During the load tests, the hinges were gradually loaded and relieved at room temperature with incrementally increasing force.
For the specified values, an insignificant permanent deformation remained after relieving the load which had no effect on the function and appearance. In most cases, the failure loads are multiples of the specified value.
The details relating to the load bearing capacity are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition.
The user must determine from case to case whether a product is suitable for the intended use. Environmental influences and aging may influence these values.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| 161.1-15-63-SR |
| 161.1-15-63-SW |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Finish | Weight (kg) | |
|---|---|---|---|---|---|---|
10.20 € | 1 | Available | 7 Days | SR-silver, RAL 9006, textured finish | 0.073 | |
10.20 € | 1 | Available | 7 Days | SW-black, RAL 9005, textured finish | 0.072 |
Loading...
Basic information
| Length l1(mm) | 63 | Width b | 15 |
|---|
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Způsob platby
Platba na účet
Zálohová platba
Výroba na vyžádání
Certifikáty
Copyright © MISUMI Corporation Všechna práva vyhrazena.