Welding Wire (High-Tensile Steel) MG-60

For butt-jointing or fillet welding of steel frames, bridge building, construction machinery, general machinery, and pressure vessels, etc. Arc is stable over a wide current range for good workability. Suitable for downward, horizontal and lateral welding at high currents. Excellent crack resistance and good impact property.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

MG-60-1.6-20

Products homepage

Data to be displayed: 30; 45; 60

Part Number
MG-60-1.6-20

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Wire Diameter (mm)	Current range, lower (A)	Current range, vertical position, elevating, upper
	239.93 €	1		15 Days	1.6	200～550	-

Basic information

Product Type	Welding wire	JIS Standard	Z3312 G 59J A 1 U C 3M1T (Previously YGW21)	AWS Standard	A5.28 ER80S-G Applicable
Compatible Material Type	Typical MG Wire for 590 MPa Class Steel	Amount Of Content	1 Box (20 kg)	Mass(g)	20000
Application and Usage Characteristic	Fillet welding and but welding of steel frames, bridges, construction machinery, general machinery, pressure vessel, etc. Arc is secured with wide current area and workability is good. Suitable for downward, horizontal and lateral welding in high current area. Excellent crack resistance and impact properties.	Main Points of Work	Pear-shaped bead cracks may occur in welded parts on the first layer of a single bevel groove. Be sure to use a low current for welding the first layer on thick plates with narrow openings. To prevent low temperature cracking, be sure to preheat to 50°C-100°C depending on plate thickness and constraints. See Pages 142 and 143.	Chemical Composition of Deposited Metal C(%)	0.08
Chemical Composition of Deposited Metal Si(%)	0.51	Chemical Composition of Deposited Metal Mn(%)	1.39	Chemical Composition of Deposited Metal Mo(%)	0.29
Chemical Composition of Deposited Metal P(%)	0.012	Chemical Composition of Deposited Metal S(%)	0.009	Mechanical Properties of Weld Metal Proof Stress MPa	590
Mechanical Properties of Weld Metal Proof Stress, Tensile Strength MPa	670	Mechanical Properties of Weld Metal Proof Stress, Elongation(%)	26	Mechanical Properties of Weld Metal Proof Stress, Absorption Energy(J)	120(-5℃)
Heat Treatment	Leave Welded	Authorized by the Classification Society of Japan	NK,DNV