Coated Rod for Soft Steel to 550 MPa Grade Steel B-33【1-4 Pieces Per Package】

General machinery, lightweight thin steel plates, light structure welding and decorative welding. Features good workability especially for flat welding and fillet welding. Less sputter, easy slug control and removal. Shallow welding permeation obtains beautiful, lustrous beads. Suitable for welding with an emphasis on appearance. The large diameter rod is optimal for decorative welding.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Products homepage

Data to be displayed: 30; 45; 60

Part Number
B-33-2-20
B-33-2.6-5
B-33-2.6-20
B-33-3.2-5
B-33-3.2-20
B-33-4-20
B-33-5-20

Standard Unit Price	Number of pc(s). included in pkg.	Minimum order quantity	Standard Shipping Days ?	Pole diameter (mm)	Pole length (mm)	Current range, lower (A)	Current range, vertical position, elevating, upper	Amount Of Content	Mass (g)
358.02 €		1	8 Days	2	300	30–60	30–60	1 Box (2 kg x 10 Cases)	20000
114.19 €		1	5 Days	2.6	350	55～95	50~90	1 Case (5 kg)	5000
312.80 €	4 Pieces Per Package	1 pack	7 Days	2.6	350	55～95	50~90	1 Box (5 kg x 4 Cases)	20000
108.42 €		1	5 Days	3.2	350	80～130	70～120	1 Case (5 kg)	5000
295.41 €	4 Pieces Per Package	1 pack	7 Days	3.2	350	80～130	70～120	1 Box (5 kg x 4 Cases)	20000
292.03 €		1	8 Days	4	400	125～175	100~160	1 Box (5 kg x 4 Cases)	20000
291.23 €		1	8 Days	5	400	170～230	120～200	1 Box (5 kg x 4 Cases)	20000

Basic information

Product Type	Welding rod	JIS Standard	Z3311 E4313	AWS Standard	A5.1 E6013 Applicable
Compatible Material Type	For thin plate and lightweight structures	Application and Usage Characteristic	General machinery, lightweight thin steel plates, light structure welding and cosmetic welding. It has especially good workability for downward and horizontal fillet welding. There is very little sputtering and the slag sheathing and peeling is good. A beautiful, glossy bead with shallow welding-in can be obtained. Applicable for welding focused on exterior appearance. The large diameter rod is optimal for cosmetic welding.	Main Points of Work	Excessive current reduces X-ray performance and is the reason for degradation of workability. Hence, use the appropriate current range. Due to excessive absorption of moisture, besides deterioration of workability, pits may also occur. Hence, dehydrate at 70 to 100°C for 30 to 60 minutes. Due to excessive drying (for long period or high temperature), the penetration decreases, X-ray performance deteriorates and causes burning of the bar, even though there is no apparent change in quality. For medium and thick welding, adopt appropriate preheating / inter-path temperature.
Chemical Composition of Deposited Metal C(%)	0.08	Chemical Composition of Deposited Metal Si(%)	0.30	Chemical Composition of Deposited Metal Mn(%)	0.33
Chemical Composition of Deposited Metal P(%)	0.013	Chemical Composition of Deposited Metal S(%)	0.009	Identification Color, Rod End Color	Pink
Identification Color, Secondary Color	NA	Mechanical Properties of Weld Metal Proof Stress MPa	430	Mechanical Properties of Weld Metal Proof Stress, Tensile Strength MPa	480
Mechanical Properties of Weld Metal Proof Stress, Elongation(%)	24	Mechanical Properties of Weld Metal Proof Stress, Absorption Energy(J)	-

Configure

7Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Pole diameter(mm)
2

2.6

3.2

4

5
Clear
Pole length(mm)
300

350

400
Clear
Current range, lower(A)
30–60

55～95

80～130

125～175

170～230
Clear
Current range, vertical position, elevating, upper
30–60

50~90

70～120

100~160

120～200
Clear
Amount Of Content
1 Box (2 kg x 10 Cases)

1 Case (5 kg)

1 Box (5 kg x 4 Cases)
Clear
Mass(g)
- 5000
- 20000
Clear
Type
- B-33
Clear