Coated Rod for Soft Steel to 550 MPa Grade Steel Z-43F (Part Numbers)

Horizontal and downward fillet welding for shipbuilding, bridge building, buildings, and general structures. The fume volume is reduced by approximately 30% compared to similar bars. An exceptional performance is demonstrated by either manual welding or gravity welding. Excellent pit resistance and re-arc properties; slag peels off almost by itself, and the bead surface is glossy and beautiful.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Z-43F-4-20

Part Numbers

Data to be displayed: 30; 45; 60

Part Number
Z-43F-4-20

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?
	311.01 €	1		8 Days

Basic information

Product Type	Welding rod	Pole diameter(mm)	4	Pole length(mm)	450/550
JIS Standard	Z3211 E4340	Compatible Material Type	For low fume, fillet welding	Amount Of Content	1 Box (20 kg)
Mass(g)	20000	Application and Usage Characteristic	Horizontal and downward fillet welding for shipbuilding, bridge building, buildings, and general structures. The fume quantity is reduced by about 30% when compared to similar rods. Exhibits excellent performance in both manual welding and gravity welding. Excellent pit resistance and re-arc properties; slag peels off almost by itself, and the bead surface is glossy and beautiful.	Main Points of Work	Suitable currents will differ based on welding methods, the state of steel plates, etc. Pay attention to the state of slag and adjust it. The electrode manipulation ratio can be between 0.8 and 1.6. However, 1.2 to 1.5 is considered best for gravity welding. Excessive moisture absorption may lead to undercutting, the unevenness of beads, etc. Please dry at temperatures between 70°C and 100°C for 30 to 60 minutes. Excessive drying (such as that caused by long periods of time or high temperatures) may lead to incomplete penetration and burnt bars, even if no changes in quality are apparent.
Chemical Composition of Deposited Metal C(%)	0.07	Chemical Composition of Deposited Metal Si(%)	0.48	Chemical Composition of Deposited Metal Mn(%)	0.72
Chemical Composition of Deposited Metal P(%)	0.02	Chemical Composition of Deposited Metal S(%)	0.009	Identification Color, Rod End Color	Silver-gray color
Identification Color, Secondary Color	Green Food	Mechanical Properties of Weld Metal Proof Stress MPa	480	Mechanical Properties of Weld Metal Proof Stress, Tensile Strength MPa	540
Mechanical Properties of Weld Metal Proof Stress, Elongation(%)	26	Mechanical Properties of Weld Metal Proof Stress, Absorption Energy(J)	74	Horizontal downward fillet	140~190
Authorized by the Classification Society of Japan	NK,ABS,LR