Slide Clamp A Type (Set of 2)【2 Pieces Per Package】
[Features]
· The tip of the jaw is engraved with a rack to clamp the workpiece downwards.
· Operation consists of inserting the wrench, and tightening in order to clamp the workpiece by the clamp head sliding along a 45° inclination.
· The tip of the jaw is engraved with a rack to clamp the workpiece downwards.
· Operation consists of inserting the wrench, and tightening in order to clamp the workpiece by the clamp head sliding along a 45° inclination.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| TC1A |
| TC2A |
| TC3A |
| Part Number |
Standard Unit Price
| Number of pc(s). included in pkg. | Minimum order quantity | Volume Discount | Width (mm) | Length (mm) | Mass (g) | Tightening Force (kN) | Accessory | |
|---|---|---|---|---|---|---|---|---|---|---|
293.75 € | 2 Pieces Per Package | 1 pack | 8 Days | 36 | 103 | 1000 | 7 | 2 Cap Screws (CS1230), 2 T Slot Nuts (1412TN), 1 Hex Wrench (6) | ||
397.90 € | 2 Pieces Per Package | 1 pack | 8 Days | 36 | 143 | 1540 | 8 | 2 Cap Screws (CS1630), 2 T Slot Nuts (1816TN), 1 Hex Wrench (6) | ||
592.22 € | 2 Pieces Per Package | 1 pack | 8 Days | 46 | 180 | 2880 | 10 | Two Cap Screws (CS2040), T Slot Nut 2 (2220TN), 1 Hex Wrench (8) |
Loading...
Basic information
| Details Type | Side clamp | Material | S50C | Heat Treatment | Hardening |
|---|---|---|---|---|---|
| Hardness | HRC35～40 | Finishing | Black oxide finish |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Způsob platby
Platba na účet
Zálohová platba
Výroba na vyžádání
Certifikáty
Copyright © MISUMI Corporation Všechna práva vyhrazena.