Throw-Away Drill, GEN3 24 Series
[Features]
· Achieves machining cost reductions through high speed, high feed, high efficiency, and scrap management
· Larger scrap pocket
· X thinning with excellent centripetality
· Low resistance blade tip shape
· Achieves machining cost reductions through high speed, high feed, high efficiency, and scrap management
· Larger scrap pocket
· X thinning with excellent centripetality
· Low resistance blade tip shape
(i)Remark
- Use a holder and tip from the same series. Direct grooving is recommended if the coolant pressure is 3.5 MPa or more. Periodically replace the holder after the tip has been exchanged about 100 times.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| 60324H-25FM |
| 60524H-25FM |
| 60724H-25FM |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Overall Length L (mm) | |
|---|---|---|---|---|---|
567.23 € | 1 | 14 Days | 169.8 | ||
612.64 € | 1 | 14 Days | 221.8 | ||
657.26 € | 1 | 14 Days | 273.8 |
Loading...
Basic information
| Hole diameter (drill diameter) D(mm) | 24.00 to 25.99 | Shank Type | Straight Shank |
|---|
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Způsob platby
Platba na účet
Zálohová platba
Výroba na vyžádání
Certifikáty
Copyright © MISUMI Corporation Všechna práva vyhrazena.