Ferrite Cores

?* Information on days to ship and prices

• • Promotional pricing ends 30/11/2024

  

  Split Core E04SR Series【1-112 Pieces Per Package】

  SEIWA ELECTRIC

  It can be attached to the cable with one touch
  
  [Features]
  · It uses the high frequency absorption characteristics of ferrite and is excellent in high frequency noise absorption.
  · The ferrite core is integrated with the resin case, and it can be attached to the interface and power cable with one touch.
  · Effective against common mode noise, reducing effect without affecting signal quality.
  · A lineup with flat type ferrite core, effective noise reduction for tight spaces.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.55 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  High μ Ferrite Clamp KRFC

  KITAGAWA INDUSTRIES

  [Features]
  ・ Effective split ferrite clamp at medium frequency (3 to 50 MHz) band
  ・ Effective noise countermeasures spanning noise terminal voltage (up to 30 MHz) to radiation field strength (30 MHz or higher) bands.
  ・ Split core with resin case mountable on wired cables, and even on cables with connector.
  ・ Band fixing enables support of wire holding and/or fixing of discrete wires. (Excluding KRFC-4)
  ・ Uses the discrete wire guide structure to prevent wiring from getting entangled during winding.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.24 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Clamp Filter for Cable Cords

  TDK

  [Features]
  · An original design with the ferrite core integrally mounted into the plastic case, so it can be installed with one touch without damaging the interface cable or power source cable.
  · The high frequency absorption characteristics of the ferrite core give it superiority in absorbing high frequency noise.
  · Effective against common mode noise, reducing effect without affecting signal quality
  · A series of varying cable external diameters to match various cable sizes.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.35 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Low Cut Ferrite Clamp MRFC

  KITAGAWA INDUSTRIES

  [Features]
  ・ Optimal for power supply switching noise and motor noise countermeasures.
  ・ Ferrite materials are tuned to support low frequency noise (150 kHz to 30 MHz).
  ・ Optional fixture can be fixed in place with M4 screws. (MRFC-13, MRFC-20)
  ・ Can be fixed in place with M6 screws. (MRFC-H40)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.92 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Low Cut Core (High μ Type) TRMH

  KITAGAWA INDUSTRIES

  [Features]
  ・ Impedance is high even in frequency bands of 1 MHz or less, and effective noise countermeasures can be obtained for conveyance noise from 150 kHz.
  ・ Impedance can be firmly boosted by increasing the number of turns, and better noise suppression effects can be expected.
  ・ The core surface is subjected to resin coating, preventing the cable from being scratched on the core edge.
  ・ An abundant variety of size variations is provided. (ø7.2 to ø87.9)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.57 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Broad Effect Core BRE

  KITAGAWA INDUSTRIES

  [Features]
  ・ With resin case to prevent cracking or chipping of ferrite.
  ・ Noise filter for low frequency bandwidths with high impedance characteristics in the kHz to several MHz band.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	13.30 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...