Nylon Connectors（Application：Cable Connection Page 2）

?* Information on days to ship and prices

• 

  Econo-seal J Series mach II+ series

  TE CONNECTIVITY

  Connector developed for use in locations waterproof and durable connectors are required, such as the engine room of the car.
  [Features]
  ·Waterproof type that can be used for engine mounted sensors where extreme conditions occur, such as temperature and vibration outside the usual.
  [Applications]
  ·For wire to wire connection.
  ·Optimal for use in locations require waterproofing and durability.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.07 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  SPTV Connector【100 Pieces Per Package】

  NICHIFU TERMINAL INDUSTRIES

  For equipment internal wiring. It is a connector that does not require special tools and is suitable for easy connection. (SPT)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	59.87 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Plug Joint Connector【5-20 Pieces Per Package】

  NICHIFU TERMINAL INDUSTRIES

  [Features]
  · Multi-wiring system for indoor wiring.
  · Electrical Appliance and Material Safety Law permitted product (PSE).
  · Easy branching by switching to a branched connection block.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	21.62 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Easy Lock Connector 110 Series【500 Pieces Per Package】

  NICHIFU TERMINAL INDUSTRIES

  A newly developed lock mechanism inside the connector enables the connector to be gently and securely installed in tab terminals. (110 Series)
  
  [Features]
  · Uses a newly developed locking mechanism.
  · Enables a reliable and highly safe connection by the motion of a locking mechanism where part of the terminal is a spring, thus preventing loss of connection caused by vibration or pulling out the electrical line.
  · Soft-touch.
  · Gentle and smooth mounting on tab terminals, dramatically reducing burden on workers and greatly improving workability.
  · Also easy to remove.
  · The connector can be easily pulled out by sliding the housing to release the lock mechanism.
  · Soft-touch allows worker burden to be reduced in the same way as for mounting the connector.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	58.87 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Plug Type Wire Connector【20-50 Pieces Per Package】

  NICHIFU TERMINAL INDUSTRIES

  Pluggable wire connector for indoor wiring. Has a highly reliable, 2-point contact spring structure. The transparent cover enables the wires to be visually checked.
  
  [Features]
  · A highly safe, soft-touch product that utilizes an easy-lock connector mechanism.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	17.41 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  D3000 Series

  TE CONNECTIVITY

  
  The D-3000 series, compatible with a wide range of dynamic main series sizes.
  
  [Features]
  · Terminal construction resistant to tampering: developed by the automobile industry, a recess tab box construction concept (3-point contact) is used that is difficult to pry apart. These tough contacts offer high reliability and stability in a real work environment.
  · Three types of plating: Select the type of plating best suited for the job and optimize cost performance. Tin plating is suitable for normal use with a low insertion/extraction frequency; 0.38 μm gold plating for frequent insertion and extractions; and 0.76 μm gold plating is suited for use in an even harsher environment.
  · Two types of connection point pressure: Two contact point pressures are available in order to propose a contact environment optimal for the specific type of use. Standard connection point pressure products are for insertion/extraction durability and multiple pin use, and high connection point pressure products are for uses involving strong vibration. These two types can be used separately.
  · High current: Maximum 15 A of regular current (with a temperature elevation of less than 30°C) can be used regardless of size.
  · Newly developed copper alloy material realized with a reliable 3-point contact construction.
  · Lock filling: A clear locking sound and vibration are produced when mating, allowing workers to be sure mating has been successfully completed even in environments with low visibility.
  · Keying: A slit in the housing is provided so that improper unions can be prevented by distinguishing X keys from Y keys. If a keying plug is used, further key patterns may be created.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.38 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  D4000 Series

  TE CONNECTIVITY

  The D4000 series is optimal for 20A commercial power supply line use.
  
  [Features]
  • Small high current contact point: By increasing the number of contact areas, this newly designed contact point ensures Hertzian stress is divided among 4 contact positions.
  • This not only provides current capacity (rated for 20A maximum), but also increases reliability tremendously.
  • Sequential contact: When circuits are electrified through static electricity or other currents, this product can be used to perform mating via a sequential process, initially by grounding the mating site.
  • Long tab was developed for sequential connection use with tab contacts.
  • By using this long tab in combination with a normal tab contact, a sequential connection environment architecture can be created.
  • High current tine (lead): This type of tine (lead) mounts to a circuit board, and is a newly developed folding V-shaped tine.
  • Although the joining area with the circuit board is wide, the through hole is extremely small, and this allows for easy pattern routing (patent pending).
  • Lock feeling: The clear locking sound and vibration that are apparent to the operator during mating ensure that work can be completed even in environments where visual inspection is not possible, without producing any malfunctions such as incomplete mating (partial mating).
  • Keying: The housing has a keying (slit) installed, and by using X keys and Y keys for different purposes, improper mating can be prevented.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.03 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  D2000 Series

  TE CONNECTIVITY

  The D-2000 Series remains small while satisfying specifications for industrial equipment.
  
  [Features]
  Twist-resistant terminal and housing structure: The box shaped recessed contacts are twist-resistant. The housing slits also prevent diagonal mating. This contributes to increased reliability.
  Effective mating length: By securing a long and effective mating length, the demands of industrial equipment can be met with high reliability.
  Applicable wires: This product can be used with AWG18 wires that are widely used in the industrial equipment sector.
  · Lock filling: A distinct locking sound and vibration are transferred to the worker when mating the connector. This makes it possible to complete work without coupling errors (half-mating) even when working in low-visibility environments.
  · Keying: The keying (slit) in the housing is provided to prevent coupling errors by distinguishing X keys from Y keys. Additional key patterns can be created by using a keying plug.
  · Center locking format: When high-density signal line mountings on circuit boards are required, the footprint on the circuit board can be minimized by mounting narrow-pitch connectors.
  · Drawer type: The drawer type has been developed so that each side of the connector has a floating construction. This is as an application that is aimed toward meet the requirements of blind mate connections. The maximum number of pins for the Series is 50P. Using this connector unit-to-unit blind mate connections are possible.
  · Hybrid type: This type can house the signal lines in the D-2000 contacts and the power line in the D-3000 contacts. The D-2600 Series can bundle the signal and power lines into a single connector. This contributes to the footprint of the circuit board and improve maintainability.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.57 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Dynamic HTS Module

  TE CONNECTIVITY

  [Features]
  · The Dynamic Series of connectors have been developed heavy duty waterproofing applications.
  · All Dynamic Series connectors are mountable from the inside of control panels to the panel exterior.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.44 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  RITS Interconnection System Connector【1-36 Pieces Per Package】

  TE CONNECTIVITY

  A “click” sound can be heard when latching while in the smart lock configuration. A connector that lets you easily make connections simply by pushing up with a general purpose tool.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.83 €
  	Special price
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  CL Connectors【1-500 Pieces Per Package】

  JST (JST MANUFACTURING)

  These are connectors that allow branching and short-circuit low resistance connections using simple tools such as pliers.
  
  [Features]
  ・ Insulation displacement connection is possible by simple operation.
  ・There is no need to strip the electrical wire sheathing when connecting.
  ・ No special tool is required. The internal contact (fork-shaped contact) is securely pressed against the electrical wire. The connection can be completed by simply clamping the connector body using pliers, etc.
  ・Superior insulation performance.
  ・Insulating the connecting section is not required.
  ・The pre-installed housing provides highly reliable insulating effectiveness.
  ・Mechanism for temporarily securing electrical wires.
  ・Includes a built-in mechanism for temporarily securing electrical wires to prevent wire-slip or connection errors when connecting wires.
  ・ Workability has been improved.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.95 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  EH Connector【50-100 Pieces Per Package】

  JST (JST MANUFACTURING)

  This connector has an ultra-thin design, in response to customers' needs for high-density mounting and increased freedom in circuit design of electronic equipment.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.25 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  NH Connector【50 Pieces Per Package】

  JST (JST MANUFACTURING)

  The post with base has three types: top, side and bottom. Electrical entry is possible in three directions: at right angles to the board (up or down) or parallel to the board.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.21 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  PH Connector【1-50 Pieces Per Package】

  JST (JST MANUFACTURING)

  This slim, low profile connector has been designed in response to requirements for higher density internal wiring.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.49 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  VH Connector【50 Pieces Per Package】

  JST (JST MANUFACTURING)

  This is a highly reliable small high-capacity connector for printed circuit boards, which enables a wide range of connections from signal circuits in consumer electronics, to power supply circuits and output circuits.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.73 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  YL Connector【1-500 Pieces Per Package】

  JST (JST MANUFACTURING)

  [Features]
  · Can use a safety design retainer to prevent incomplete insertion of contacts. This guides the contact to the correct fixed position and securely locks it in place.
  · Housing lance method.
  ·Retainer.
  ▪ Interlocking structure.
  · Panel locking structure.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.16 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Wire to Wire Connector Housing with 2.00 mm Pitch (51005)

  MOLEX

  [Features]
  • Single-row Molex connector with few terminals: (supported housing: 51006, compatible terminals: 50013).
  · Number of leads: 2 to 10 leads

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.12 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  2.0 mm Pitch Wire-to-Board, Wire-to-Wire Housing

  MOLEX

  [Features]
  · Molex housings are retainer compatible, common wire-to-board, wire-to-wire housings (compatible retainer: 51217, compatible housing: 51227).
  Number of pins: 2 to 15.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.17 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Wire-to-Wire Plug Housings with 2.50-mm Pitch (51198)

  MOLEX

  [Features]
  • Housing 51103 for Molex fittings; can fit Mini-Locks.
  · Number of leads: 2 to 15 leads.
  • Housing lance.
  • Includes flanges for panel mounting.
  • Panel thickness: 0.8 - 2.0 mm compatible.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.19 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  2.5 mm Pitch Wire-to-Wire Connector Housing (51111)

  MOLEX

  A 2.5 mm pitch wire-to-wire nylon connector.
  [Features]
  · Retainer-compatible types available.
  [Applications]
  · Optimal for consumer devices such as signal, wire-to-board and wire-to-wire types.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.11 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  2.5 mm Pitch Wire-to-Wire Connector Housing (51112)

  MOLEX

  [Features]
  · A Molex wire-to-wire connector.
  Retainer-compatible types are also available (compatible housing: 51111, compatible terminal: 50398).
  Number of pins: 2 to 15.
  With panel-mounting tabs: 51112 ★ ★ 30.
  Without panel-mounting tabs: 51112 ★ ★ 10.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.19 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  2.5mm Board-in Connector Housing (51015)

  MOLEX

  [Features]
  · Molex wire mounted directly to the board (compatible with 51035 series housings (Applicable terminal: 50034).
  · Number of leads: 2 to 15 leads.
  • Low-profile type.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.11 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  2.5mm Board-in Connector Housing (51035)

  MOLEX

  [Features]
  · Molex wire mounted directly to the board (compatible with 51035 series housings (Applicable terminal: 50097).
  · Number of leads: 2 to 18 leads.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.36 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  4.00 mm Board-in Connector Housings (51036)

  MOLEX

  [Features]
  · Molex wire mounted directly to the board (compatible with 51035 series housings (Applicable terminal: 50097).
  · Number of leads: 2 to 18 leads.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.14 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  4.80 mm Pitch Mini-Fit Relay Housing (5025 Plug)

  MOLEX

  A 4.80 mm pitch wire-to-wire nylon connector.
  [Features]
  · Fully protected terminal with insulated housing walls.
  [Applications]
  · Optimal for consumer devices such as power and wire-to-wire types.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.30 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  4.80 mm Pitch Minifit Relay Terminal Housing (5025, Receptacle)

  MOLEX

  Molex terminals are completely protected by the housing's insulation wall. (Mating housing: 5025Plig, conforming terminal: 5005)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.17 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  CLIK-Mate™ Wire-to-Board Connector (502578)

  MOLEX

  A Molex product that delivers excellent connection reliability and a low input force. Achieves secure mating with a pleasant “click”. (Compatible terminals: 502579 / 503429, mating wafers: 502584 / 502585)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MicroBlade™ 2.00 mm Pitch PCB Housing (51004)

  MOLEX

  A highly-reliable Molex product with a box type terminal and a straight and right angle flexible design. Friction lock type. Terminal (compatible terminal: 50011, mating wafers: 53014/ 53015/ 53025)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.11 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MicroClasp® 2.0 mm Pitch Circuit Board Terminal (56134)【9,000 Pieces Per Package】

  MOLEX

  A space-saving Molex product that offers easier removal than other similar 2.00 mm (.079") and 2.50 mm (.098") pitch wire-to-circuit board connection systems. Angle type (compatible housings: 51242 / 51353 / 51382)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	248.63 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MicroClasp® 2.0 mm Pitch Circuit Board Housing (51242)

  MOLEX

  [Features]
  A space-saving Molex product that offers easier removal than other similar 2.00 mm (.079") and 2.50 mm (.098") pitch wire-to-circuit board connection systems. (Mating wafers: 57763, conforming terminal: 56134, conforming retainer: 55767.)

  Select to compare

  Configure now
  Starting from∗ ：	0.58 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micro-Fit3.0™ Connector (43020)

  MOLEX

  A Molex 3.00 mm pitch connector. Available in a variety of fitting forms and poles, including wire-to-wire, wire-to-circuit board, and board-to-board types. Maximum rated current is 5.0 A, and we also have products compatible with other brands. A housing. (Mating housing: 43025)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.48 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Mini-Fit Sr. Power Connector (42816)

  MOLEX

  A Molex 10.00 mm pitch wire-to-board, wire-to-wire connector. Maximum current: 50.0 A (2-circuit, applicable wire size: 8 AWG). (Compatible terminal: 42815, compatible housing: 42818)

  Select to compare

  Configure now
  Starting from∗ ：	1.67 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Mini-Lock™ 2.50 mm Pitch Wire-to-Circuiboard Housing (51102)

  MOLEX

  Molex types are available in both straight and right angled types. Wire-to-wire optional parts are also available. This product has a high mating workability on the fitting guide wall. (Compatible terminal: 50351, mating wafers: 53375 / 53426)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.08 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Mizu-P25™ Minituare Waterproof Connector (52213)

  MOLEX

  A compact IP67 (international protection class) Molex wire-to-wire connector with a dust and water proof structure. (Compatible Terminal: 50148, Fitting Plug: 52266)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.36 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MX150 Housing (19432)

  MOLEX

  Molex Products - Fitting Housing: 19433, Compatible Terminal: 19434.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.21 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MX150 Housing (19433)

  MOLEX

  [Features]
  Molex Fitting Housing: 19432, Compatible Terminal: 19431

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	13.01 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MX150 Housing (33471)

  MOLEX

  Molex compatible housing: 33481, compatible terminal: 33012

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.12 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MX150 Housing (33472)

  MOLEX

  [Features]
  · Molex compatible housing: 33482, compatible terminal: 33012

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.68 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MX150 Housing (33481)

  MOLEX

  Molex Products - Fitting Housing: 33471, Compatible Terminal: 33000

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.09 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MX150 Housing (33482)

  MOLEX

  Molex compatible housing: 33472, compatible terminals: 33000/33011

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.91 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  PanelMate 1.25 mm Pitch Board Housing (51146)

  MOLEX

  A Molex 1.85 mm high, thin, low-profile type product. SMT type mounting with solder tabs. (Compatible terminal: 50641, compatible headers: 53779/53780/55063/55178)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.19 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  PicoBlade™ 1.25 mm Pitch Circuit Board Housing (51047)

  MOLEX

  A number of wire-to-circuit board and wire-to-wire optional extra Molex products are available. There are variations in the headers of both types: Surface mount type and through-hole type. (Mating housing: 51021, compatible terminals: 50125/ 50133)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.09 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  SL™ Modular Housing (70107)

  MOLEX

  A Molex 2.54 mm pitch connector for circuit board-to-wire connections. Available for discreet wires and all types of IDT/FFC cables. ②

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  SPOX™ Housing（51191）

  MOLEX

  [Features]
  The Molex Spox family of wire-to-circuit board connectors have a structure that works within a pitch range of 2.50–5.08 mm. (Mating housing: 5240, conforming terminal: 50802.)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.54 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  SPOX™ Housing（5195）

  MOLEX

  The Molex Spox family of wire-to-circuit board connectors have a structure that works within a pitch range of 2.50 mm to 5.08 mm. (Mating housings: 5272/ 5273/ 5274/ 5096/ 53405/ 5271, compatible terminals: 5194/ 5225)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.63 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...