Registrace

Překládáme náš obchod do češtiny!
Protože však máme mnoho produktů a stránek, bude to nějakou dobu trvat. Mezitím bude náš katalog produktů k dispozici v angličtině. Děkujeme vám za trpělivost!

Wiremolds

Cable raceways are components that protect both indoor and outdoor wiring, such as VVF cables wired along the walls, ceiling or floor, communications cables, etc. They are usually made of aluminum, rigid ABS or PVC, and materials are selected depending on strength and size requirements for where the cable raceways are used and to match the color of walls, etc., where they will be installed. Raceways are cut to desired length using raceway cutters before installing. There are various ways of fixing raceways to mounting surfaces, including using nails or screws, adhesive tapes on surfaces where holes cannot be drilled, etc. Additionally, corner raceways for wiring corners and raceway ducts that allow individual wires to be pulled from the wall edge can be used for cable protection in places where straight raceways alone will not be sufficient.
    • Industrial-Trunking, Cable Trunking Body + Cover, KD20

        PFLITSCH

        Industrial-Trunking, Cable Trunking Body + Cover, KD20

        Industrial-Trunking, metal cable trunking bodies and covers for large cable volumes, with numerous accessory fittings, for horizontal and vertical installation, low-burr component edges, simple and safe cutting with PFLITSCH machines.
        Více informací
        Cena (bez DPH) od:
        77.43 €
        Běžné datum odeslání:
        97 pracovních dnů
        Konfigurovat
      • Industrial-Trunking, Riser Trunking, Steel, Galvanized

          PFLITSCH

          Industrial-Trunking, Riser Trunking, Steel, Galvanized

          Industrial Trunking, Rising trunking for vertical cable routing, with C-rails for relieving strain on cables, hinged cover, low-burr design, simple and safe cutting and pre-assembly with PFLITSCH machines and tools, steel, galvanized.
          Více informací
          Cena (bez DPH) od:
          327.57 €
          Běžné datum odeslání:
          97 pracovních dnů
          Konfigurovat
        • PIK-Trunking, Installation Trunking Body

            PFLITSCH

            PIK-Trunking, Installation Trunking Body

            PIK-Trunking, compact metal cable trunking, trunking body for low cable volumes, various accessory fittings, snap-on cover, low-burr design, comprehensive edge protection, wide range of accessories available, simple and safe cutting and pre-assembly with PFLITSCH machines and tools.
            Více informací
            Cena (bez DPH) od:
            20.87 €
            Běžné datum odeslání:
            97 pracovních dnů
            Konfigurovat
          • Industrial-Trunking, Flexible Steel Duct, Galvanized

              PFLITSCH

              Industrial-Trunking, Flexible Steel Duct, Galvanized

              Industrial-Trunking flexible steel duct, for metal cable trunking, for length- and radius-flexible routing, 15, 6 m roll, low-burr design, connection plates with press-fitted lock nuts, steel, galvanized.
              Více informací
              Cena (bez DPH) od:
              72.81 €
              Běžné datum odeslání:
              97 pracovních dnů
              Konfigurovat
            • PIK-Trunking, Installation Trunking Body and Cover

                PFLITSCH

                PIK-Trunking, Installation Trunking Body and Cover

                PIK-Trunking, compact metal cable trunking for smaller cable volumes, various accessory fittings, snap-on cover, low-burr design, comprehensive edge protection, wide range of accessories, machines and tools for pre-assembly, CAD planning tool.
                Více informací
                Cena (bez DPH) od:
                33.90 €
                Běžné datum odeslání:
                97 pracovních dnů
                Konfigurovat
              • Cable Bridge, Self-Adhesive
                • Volume Discount

                KSS (KAI SUH SUH ENTERPRISE)

                Cable Bridge, Self-Adhesive

                Cena (bez DPH) od:
                17.99 €
                Běžné datum odeslání:
                3 pracovních dnů
                Konfigurovat
              • Industrial-Trunking, Cable Trunking Body, K2

                  PFLITSCH

                  Industrial-Trunking, Cable Trunking Body, K2

                  Industrial-Trunking, metal cable trunking bodies for large cable volumes, with numerous accessory fittings, for horizontal and vertical installation, low-burr component edges, simple and safe cutting with PFLITSCH machines.
                  Více informací
                  Cena (bez DPH) od:
                  49.10 €
                  Běžné datum odeslání:
                  97 pracovních dnů
                  Konfigurovat
                • Industrial-Trunking, Cable Trunking Body with Preformed Base Openings, K2 VB

                    PFLITSCH

                    Industrial-Trunking, Cable Trunking Body with Preformed Base Openings, K2 VB

                    Industrial-Trunking, metal cable trunking with pre-stamped base cut-outs, for large cable volumes, sheet nibbler optional, for horizontal and vertical installation, low-burr component edges, various cover variants, simple and safe cutting with PFLITSCH machines.
                    Více informací
                    Cena (bez DPH) od:
                    86.53 €
                    Běžné datum odeslání:
                    97 pracovních dnů
                    Konfigurovat
                  • Industrial-Trunking, Cable Trunking Body with Preformed Lateral Cut-outs, K2 VS

                      PFLITSCH

                      Industrial-Trunking, Cable Trunking Body with Preformed Lateral Cut-outs, K2 VS

                      Industrial-Trunking, metal cable trunking with pre-stamped side cut-outs, for large cable volumes, sheet nibbler optional, for horizontal and vertical installation, low-burr component edges, various cover variants, simple and safe cutting with PFLITSCH machines.
                      Více informací
                      Cena (bez DPH) od:
                      71.44 €
                      Běžné datum odeslání:
                      97 pracovních dnů
                      Konfigurovat
                    • Automobile-Trunking, Heavy-duty Trunking Body, Steel, Galvanized

                        PFLITSCH

                        Automobile-Trunking, Heavy-duty Trunking Body, Steel, Galvanized

                        Automobile-Trunking, heavy-duty trunking body for floor mounting, sturdy trunking body made of sheet steel, accessory fittings: 90° elbow, 135° bend, floor bracket, support profiles and lots of accessories for customising
                        Více informací
                        Cena (bez DPH) od:
                        127.11 €
                        Běžné datum odeslání:
                        97 pracovních dnů
                        Konfigurovat
                      • Automobile-Trunking, Heavy-duty Trunking Body with System Base Perforation, Steel, Galvanized

                          PFLITSCH

                          Automobile-Trunking, Heavy-duty Trunking Body with System Base Perforation, Steel, Galvanized

                          Automobile-Trunking, heavy-duty trunking body with system perforation for floor mounting, sturdy trunking body made of sheet steel, accessory fittings: 90° elbow, 135° bend, floor bracket, support profiles and lots of accessories for customising, UL-version optionalSteel, galvanized
                          Více informací
                          Cena (bez DPH) od:
                          153.11 €
                          Běžné datum odeslání:
                          97 pracovních dnů
                          Konfigurovat
                        • Industrial-Trunking, Hinge Trunking, Steel, Galvanised

                            PFLITSCH

                            Industrial-Trunking, Hinge Trunking, Steel, Galvanised

                            Industrial Trunking, metal cable trunking comprising body and hinged cover, with numerous accessory fittings, for horizontal and vertical installation, low-burr component edges, simple and safe cutting with PFLITSCH machines, steel, galvanised.
                            Více informací
                            Cena (bez DPH) od:
                            114.09 €
                            Běžné datum odeslání:
                            97 pracovních dnů
                            Konfigurovat

                          Nenašli jste produkt, který hledáte?