Square End Mills (Carbide)（work material：Cast Iron Page 2）

249

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 12 Days or Less

?* Information on days to ship and prices

TSC series carbide square end mill, 2-flute / 3D Flute Length (regular) model

MISUMI

[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Regular 2-groove size that can be used for a wide range of applications
-Optimal for low to medium speed machining due to the universal 30° helix angle
-It is equipped with a coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.

Volume Discount

TS
General Steel
2 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide square end mill, 2-flute / 3.5D Flute Length model

MISUMI

Lineups of fine intermediate flute length between regular and long are available only in MISUMI.

Volume Discount

TS
General Steel
2 Flutes
RL

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide square end mill, 2-flute / 4D Flute Length (long) model

MISUMI

[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat treated steel (up to 50 HRC)
-The 4D flute length supports deep cavity milling
-Optimal for low to medium rotation machining due to the universal 30° helix angle
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
2 Flutes
L (Long)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide square end mill for shrinkage fitting, 4-flute / 1D Flute Length (stub) model

MISUMI

[Features]
-The tool shows high performance in machining general steel, EN 1.4301 Equiv. (sintered) and quenched and tempered steel (up to 50 HRC)
-The rigidity of the tool is emphasized by shortening the flute length and overall length for shrink fit
-Optimal for low to medium speed machining due to the universal 30° helix angle
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
B (Stub)

Select to compare

Configure now
Starting from^∗ ：	19.07 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide square end mill, 4-flute / 1.5D Flute Length (stub) model

MISUMI

[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Suitable for high-speed machining with 1.5 times groove length
-Optimal for low to medium speed machining due to universal 30° helix angle
-It has a coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
B (Stub)

Select to compare

Configure now
Starting from^∗ ：	21.38 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide square end mill, 4-flute / 2D Flute Length (short) model

MISUMI

[Features]
-The coating shows high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat treated steel (up to 50 HRC)
-Optimal for low to medium speed machining due to universal 30° helix angle
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide square end mill, 4-flute / 2.5D Flute Length model

MISUMI

[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Slot length is 2.5 times the cutting edge diameter between short and regular flutes
-Optimal for machining in low to medium rotation range due to universal 30° helix angle
-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
SR

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide square end mill, 4-flute / 3D Flute Length (regular) model

MISUMI

[Features]
-The cutter shows high performance in machining general steel, EN 1.4301 Equiv. (sintered) and quenched and tempered steel (up to 50 HRC)
-All-purpose cutter with 4 cutting edges for a wide range of applications
-Optimal for machining in the low to medium speed range due to the general-purpose helix angle of 30°
-The coating shows high oxidation resistance and high hardness and achieves a long tool life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide square end mill, 4-flute / 3.5D Flute Length model

MISUMI

[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat treated steel (up to 50 HRC)
-The flute length is 3.5 times the cutting diameter between the normal flute and the long flute
-Optimal for low to medium speed machining due to the universal 30° helix angle
-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
RL

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide end mill for key grooves, 2-flute / short model

MISUMI

[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-2-flute end mill for machining keyways
-The shape of the end cutting edge is almost flat so that the workpiece can be machined flat.
-Short cutting edge length that is resistant to chattering (1. 5 times longer than the cutting edge diameter)
-Since the cutting edge has been machined into a sharp corner, corner edges can also be machined
-Optimal for low to medium speed machining due to the universal 30° helix angle
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating characteristics.

Volume Discount

TS
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	38.96 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide square end mill, 4-flute / 2D Flute Length (short) model

MISUMI

The 2D flute length type with high versatility achieves high-precision processing including grooving

Volume Discount

Non-Coated
General Steel
4 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Carbide square end mill, 4-flute / 3D Flute Length (regular) model

MISUMI

The 3D flute length type that's capable of sophisticated grooving is also known for the producing the high-quality finish

Volume Discount

Non-Coated
General Steel
4 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Carbide square end mill, 4-flute / 4D Flute Length (long) model

MISUMI

Achieves both high levels of machining precision and reduction of processing time in side milling

Volume Discount

Non-Coated
General Steel
4 Flutes
L (Long)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

XAL Series Carbide Square End Mill, 2-Flute / 1.5D Flute Length (Stub) Model

MISUMI

Stub flute length items that are ideal for grooving are available at incredibly low prices

Volume Discount

XAL
General Steel
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	9.15 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAL Series Carbide Square End Mill, 2-Flute / 2, 5D Flute Length Model

MISUMI

The Misumi's unique lineup of fine flute length is available at attractive low prices

Volume Discount

XAL
General Steel
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	10.07 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAL Series Carbide Square End Mill, 2-Flute / 4D Flute Length (Long) Model

MISUMI

A long flute length type that supports deep engraving

Volume Discount

XAL
General Steel
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	12.66 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAL Series Carbide Square End Mill, 4-Flute / 2.5D Flute Length Model

MISUMI

The Misumi's original fine intermediate flute length is available at a reasonable price

Volume Discount

XAL
General Steel
4 Flutes

Select to compare

Configure now
Starting from^∗ ：	10.30 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

XAL Series Carbide Square End Mill, 4-Flute / 4D Flute Length (Long) Model

MISUMI

Popular sizes that support deeper side milling are available in XAL Series

Volume Discount

XAL
General Steel
4 Flutes

Select to compare

Configure now
Starting from^∗ ：	23.56 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Blade Neck Relief End Mill, 2-Flute / Regular Model

MISUMI

A blade relief type that's not affected by the interference of tools

General Steel
2 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill

MISUMI

[Features]
-Alteration cutter that can determine the corner chamfer size of carbide cutters in 0.1 mm steps
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices etc.

Non-Coated
General Steel

Select to compare

Configure now
Min. Shipping Days ：	7 Days

Carbide Blade Neck Relief End Mill, 4-Flute / Short Model

MISUMI

Blade relief type with a 4-flute structure

General Steel
4 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

Carbide Blade Neck Relief End Mill, 4-Flute / Regular Model

MISUMI

Blade relief type with a 4-flute structure

General Steel
4 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

XCP Coated Carbide Square End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Stub / Short Type (Gash Land)

MISUMI

· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.
· Popular XCP series end mill with a shape that emphasizes blade tip rigidity

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	32.66 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XCP Coated Carbide Square End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / 2.5D / Regular Type (Gash Land)

MISUMI

· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.
· Available in MISUMI's extensive blade tip specifications

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	25.15 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC Series Carbide Uneven Lead 4-Flute Square End Mill

MISUMI

The long-awaited unequal lead 4-flute square end mill is introduced in the TSC Series (helix angle of 40° / 43°)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	45.45 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

VAC Series Carbide 2-Flute Square End Mill (Extra-Long Model)

MISUMI

[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered), and heat-treated steel (up to 50 HRC)
-Effective for machining deep parts due to extra-long blade length
-Ultra-fine-grained carbide base material and coating with excellent adhesion and heat resistance are used
-Can machine heat-treated steel up to 50HRC
-. Optimal for machining in low to medium rotation range due to universal 30° helix angle
-Coating with excellent lubricity provides stable abrasion resistance and improves workpiece shape accuracy (VAC coating has weak electrical conductivity. Please be careful when using an electric set-up device)
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	35.98 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model)

MISUMI

[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered), and heat-treated steel (up to 50 HRC)
-Effective for machining deep parts due to extra long blade length
-Ultra-fine-grained carbide base material and coating with excellent adhesion and heat resistance are used
-Can machine heat-treated steel up to 50HRC
-. Optimal for machining in low to medium rotation range due to universal 30° helix angle
-Coating with excellent lubricity provides stable abrasion resistance and improves workpiece shape accuracy (VAC coating has weak electrical conductivity. Please be careful when using an electric set-up device)
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	39.03 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

VAC Series Carbide 2-Flute Square End Mill

MISUMI

[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered), and heat-treated steel (up to 50 HRC)
-All-purpose blade with regular 2-blade length
-Ultra-fine carbide base material and coating with excellent adhesion and heat resistance are used
-Can machine heat-treated steel up to 50HRC
-. Optimal for machining in low to medium rotation range due to general purpose helix angle of 30°
-Coating with excellent lubricity provides stable abrasion resistance and improves workpiece shape accuracy (VAC coating has weak electrical conductivity. Please be careful when using an electric set-up device)
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.60 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

GSX MILL 2-Flute Blade 2.5D P Type GSX2P-2.5D

NACHI(FUJIKOSHI)

Supports a wide variety of materials such as green wood and hardened steel. Suited for finishing work. Blade tip is a sharp corner.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	22.27 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

GSX MILL 4-Flute Blade 2.5D GSX4C-2.5D

NACHI(FUJIKOSHI)

Compatible with everything from wet machining of green timber to high speed dry machining of high hardness materials.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	34.30 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

GSX MILL 4-Flute Blade 3D GSX4C-3D

NACHI(FUJIKOSHI)

Compatible with everything from wet machining of green timber to dry machining of high hardness materials.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	34.30 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

X's Mill Geo Long Shank 4GEOLS

NACHI(FUJIKOSHI)

Can perform high precision machining even during deep carving.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	93.51 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

GS MILL 2-Flute Blade 2GS

NACHI(FUJIKOSHI)

Supports a wide variety of materials such as green wood and hardened steel. Suited for finishing work.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	26.41 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

GSX MILL 4-Flute Blade 1.5D GSX4C-1.5D

NACHI(FUJIKOSHI)

Compatible with everything from wet machining of green timber to high speed dry machining of high hardness materials.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	34.30 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Mini Square End Mill with 2 Flutes 2MNE

NACHI(FUJIKOSHI)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	56.66 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Mini Square End Mill with 4 Flutes 4MNE

NACHI(FUJIKOSHI)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	64.52 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

GS MILL Slot GSSLT

NACHI(FUJIKOSHI)

Can go from drilling holes to grooving in continuous high efficiency machining. Well suited for small machines and thin lamenates with weak clamping force.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	63.83 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

GSX MILL 2-Flute Blade 3D GSX2C-3D

NACHI(FUJIKOSHI)

Compatible with everything from wet machining of green timber to dry machining of high hardness materials.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	22.27 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

GSX MILL 2-Flute Blade 4D GSX2C-4D

NACHI(FUJIKOSHI)

Compatible with everything from wet machining of green timber to dry machining of high hardness materials.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	38.44 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

GSX MILL 4-Flute Blade 2D GSX4C-2D

NACHI(FUJIKOSHI)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	34.30 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

X's Mill Geo 4XSGEO

NACHI(FUJIKOSHI)

By grooving enables high feed and high efficiency machining. Supports wide range from mold steel to difficult-to-cut materials.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	79.46 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

X's Mill Geo Medium 4GEOM

NACHI(FUJIKOSHI)

Can deal with materials ranging from green timber to high hardness steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	94.15 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

X's Mill Geo Long SL4GEO

NACHI(FUJIKOSHI)

Suitable for wide side surfaces and side milling at depth.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	107.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Anchor V 2-Flute 2CE

NACHI(FUJIKOSHI)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	37.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

GSX MILL Slot 1.5D GSXSLT-1.5D

NACHI(FUJIKOSHI)

Can go from drilling holes to grooving in continuous high efficiency machining. Well suited for small machines and thin lamenates with weak clamping force.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	45.60 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
Blade diameter (D)(φ)
work material
Blade length (ℓ)(mm)
Number of flutes(sheet)
Type
Coating
Shank diameter (d)(mm)
Overall Length (L)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Blade tip shape
Torsion Angle (θ)

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)
Product Series	TSC series carbide square end mill, 2-flute / 3D Flute Length (regular) model	TSC series carbide square end mill, 2-flute / 3.5D Flute Length model	TSC series carbide square end mill, 2-flute / 4D Flute Length (long) model	TSC series carbide square end mill for shrinkage fitting, 4-flute / 1D Flute Length (stub) model	TSC series carbide square end mill, 4-flute / 1.5D Flute Length (stub) model	TSC series carbide square end mill, 4-flute / 2D Flute Length (short) model	TSC series carbide square end mill, 4-flute / 2.5D Flute Length model	TSC series carbide square end mill, 4-flute / 3D Flute Length (regular) model	TSC series carbide square end mill, 4-flute / 3.5D Flute Length model	TSC series carbide end mill for key grooves, 2-flute / short model	Carbide square end mill, 4-flute / 2D Flute Length (short) model	Carbide square end mill, 4-flute / 3D Flute Length (regular) model	Carbide square end mill, 4-flute / 4D Flute Length (long) model	XAL Series Carbide Square End Mill, 2-Flute / 1.5D Flute Length (Stub) Model	XAL Series Carbide Square End Mill, 2-Flute / 2, 5D Flute Length Model	XAL Series Carbide Square End Mill, 2-Flute / 4D Flute Length (Long) Model	XAL Series Carbide Square End Mill, 4-Flute / 2.5D Flute Length Model	XAL Series Carbide Square End Mill, 4-Flute / 4D Flute Length (Long) Model	Carbide Blade Neck Relief End Mill, 2-Flute / Regular Model	Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill	Carbide Blade Neck Relief End Mill, 4-Flute / Short Model	Carbide Blade Neck Relief End Mill, 4-Flute / Regular Model	XCP Coated Carbide Square End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Stub / Short Type (Gash Land)	XCP Coated Carbide Square End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / 2.5D / Regular Type (Gash Land)	TSC Series Carbide Uneven Lead 4-Flute Square End Mill	VAC Series Carbide 2-Flute Square End Mill (Extra-Long Model)	VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model)	VAC Series Carbide 2-Flute Square End Mill	GSX MILL 2-Flute Blade 2.5D P Type GSX2P-2.5D	GSX MILL 4-Flute Blade 2.5D GSX4C-2.5D	GSX MILL 4-Flute Blade 3D GSX4C-3D	X's Mill Geo Long Shank 4GEOLS	GS MILL 2-Flute Blade 2GS	GSX MILL 4-Flute Blade 1.5D GSX4C-1.5D	Carbide Mini Square End Mill with 2 Flutes 2MNE	Carbide Mini Square End Mill with 4 Flutes 4MNE	GS MILL Slot GSSLT	GSX MILL 2-Flute Blade 3D GSX2C-3D	GSX MILL 2-Flute Blade 4D GSX2C-4D	GSX MILL 4-Flute Blade 2D GSX4C-2D	X's Mill Geo 4XSGEO	X's Mill Geo Medium 4GEOM	X's Mill Geo Long SL4GEO	Anchor V 2-Flute 2CE	GSX MILL Slot 1.5D GSXSLT-1.5D
Starting from^∗	- Volume Discount	- Volume Discount	- Volume Discount	19.07 € *Unit price with basic configuration Volume Discount	21.38 € *Unit price with basic configuration Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	38.96 € *Unit price with basic configuration Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	9.15 € *Unit price with basic configuration Volume Discount	10.07 € *Unit price with basic configuration Volume Discount	12.66 € *Unit price with basic configuration Volume Discount	10.30 € *Unit price with basic configuration Volume Discount	23.56 € *Unit price with basic configuration Volume Discount	-	-	-	-	32.66 € *Unit price with basic configuration Volume Discount	25.15 € *Unit price with basic configuration Volume Discount	45.45 € *Unit price with basic configuration Volume Discount	35.98 € *Unit price with basic configuration Volume Discount	39.03 € *Unit price with basic configuration Volume Discount	16.60 € *Unit price with basic configuration Volume Discount	22.27 € *Unit price with basic configuration Volume Discount	34.30 € *Unit price with basic configuration Volume Discount	34.30 € *Unit price with basic configuration Volume Discount	93.51 € *Unit price with basic configuration Volume Discount	26.41 € *Unit price with basic configuration Volume Discount	34.30 € *Unit price with basic configuration Volume Discount	56.66 € *Unit price with basic configuration Volume Discount	64.52 € *Unit price with basic configuration Volume Discount	63.83 € *Unit price with basic configuration Volume Discount	22.27 € *Unit price with basic configuration Volume Discount	38.44 € *Unit price with basic configuration Volume Discount	34.30 € *Unit price with basic configuration Volume Discount	79.46 € *Unit price with basic configuration Volume Discount	94.15 € *Unit price with basic configuration Volume Discount	107.50 € *Unit price with basic configuration Volume Discount	37.50 € *Unit price with basic configuration Volume Discount	45.60 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	Same day	5 Days	7 Days	7 Days	7 Days	7 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days
Specifications	TS General Steel 2 Flutes R (Regular)	TS General Steel 2 Flutes RL	TS General Steel 2 Flutes L (Long)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes SR	TS General Steel 4 Flutes R (Regular)	TS General Steel 4 Flutes RL	TS General Steel 2 Flutes S (Short)	Non-Coated General Steel 4 Flutes S (Short)	Non-Coated General Steel 4 Flutes R (Regular)	Non-Coated General Steel 4 Flutes L (Long)	XAL General Steel 2 Flutes	XAL General Steel 2 Flutes	XAL General Steel 2 Flutes	XAL General Steel 4 Flutes	XAL General Steel 4 Flutes	General Steel 2 Flutes R (Regular)	Non-Coated General Steel	General Steel 4 Flutes S (Short)	General Steel 4 Flutes R (Regular)
Blade diameter (D)(φ)	0.2 ～ 20	0.5 ～ 12	1 ～ 12	2 ～ 12	2 ～ 12	1 ～ 20	1 ～ 16	1 ～ 20	1 ～ 16	2 ～ 14	1 ～ 20	2 ～ 20	1 ～ 12	0.5 ～ 20	1 ～ 12	0.5 ～ 12	1.5 ～ 16	1 ～ 12	6 ～ 12	2 ～ 20	6 ～ 12	6 ～ 12	1 ～ 12	1 ～ 16	2 ～ 25	1 ～ 20	1.5 ～ 25	0.3 ～ 20	1 ～ 20	1 ～ 20	1 ～ 20	3 ～ 20	0.2 ～ 20	1 ～ 20	0.1 ～ 2	1 ～ 2	3 ～ 16	1 ～ 20	1 ～ 20	1 ～ 20	2 ～ 32	2 ～ 20	3 ～ 20	1 ～ 20	1 ～ 16
work material	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○/◎]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[◎]	Cast Iron[◎]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]
Blade length (ℓ)(mm)	0.6 ～ 60	1.75 ～ 42	4 ～ 48	2 ～ 12	3 ～ 18	2 ～ 40	2.5 ～ 40	3 ～ 60	3.5 ～ 56	3 ～ 21	2 ～ 40	5 ～ 60	4 ～ 48	0.75 ～ 30	2.5 ～ 30	2 ～ 48	3.75 ～ 40	4 ～ 48	-	3 ～ 60	-	-	2 ～ 24	2.5 ～ 40	4 ～ 50	4 ～ 80	6 ～ 120	0.6 ～ 45	2.5 ～ 50	2.5 ～ 50	3 ～ 60	4.5 ～ 30	0.4 ～ 38	1.5 ～ 30	0.2 ～ 6	3 ～ 6	8 ～ 32	3 ～ 60	4 ～ 80	2 ～ 40	6 ～ 70	10 ～ 56	18 ～ 75	3 ～ 38	1.5 ～ 24
Number of flutes(sheet)	2	2	2	4	4	4	4	4	4	2	4	4	4	2	2	2	4	4	2	2 ～ 4	4	4	4	4	4	2	4	2	2	4	4	4	2	4	2	4	3	2	2	4	4	4	4	2	3
Type	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Coating	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	Non-Coated	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	Non-Coated	For High Hardness (Silicon Group) / Non-Coated	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	-	-	-	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	-	-	TiAlN	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	TiAlN	-	For General Steels (AlCrN, etc.)
Shank diameter (d)(mm)	3 ～ 20	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 20	4 ～ 16	4 ～ 20	6 ～ 16	6 ～ 16	4 ～ 20	4 ～ 20	4 ～ 12	4 ～ 20	4 ～ 12	4 ～ 12	4 ～ 16	4 ～ 12	6 ～ 12	4 ～ 20	6 ～ 12	6 ～ 12	3 ～ 12	3 ～ 16	6 ～ 25	6 ～ 20	4 ～ 25	4 ～ 20	4 ～ 20	4 ～ 20	4 ～ 20	6 ～ 20	3 ～ 20	4 ～ 20	3 ～ 4	4	6 ～ 16	4 ～ 20	4 ～ 20	4 ～ 20	4 ～ 32	4 ～ 20	6 ～ 20	4 ～ 20	4 ～ 16
Overall Length (L)(mm)	40 ～ 130	45 ～ 95	45 ～ 100	40 ～ 65	40 ～ 75	40 ～ 110	45 ～ 105	45 ～ 130	45 ～ 120	45 ～ 75	40 ～ 110	45 ～ 130	45 ～ 100	40 ～ 110	45 ～ 85	45 ～ 100	45 ～ 105	45 ～ 100	60 ～ 85	40 ～ 130	45 ～ 75	60 ～ 85	40 ～ 75	40 ～ 120	50 ～ 120	60 ～ 200	60 ～ 250	40 ～ 100	40 ～ 100	40 ～ 100	40 ～ 120	60 ～ 200	38 ～ 100	40 ～ 100	40	40	50 ～ 115	40 ～ 120	40 ～ 140	40 ～ 100	50 ～ 175	50 ～ 125	60 ～ 155	50 ～ 100	40 ～ 90
Underneck length (ℓ1)(mm)	23 ～ 92	26 ～ 65	29 ～ 76	-	-	15 ～ 73	19 ～ 73	23 ～ 92	26 ～ 88	-	17 ～ 73	23 ～ 92	29 ～ 70	-	-	-	-	-	-	-	-	-	5 ～ 25	-	-	-	-	-	-	-	-	12 ～ 82	-	-	-	-	-	-	-	-	-	-	-	-	-
Machining Application	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side	Plane / Side	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts
Blade tip shape	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	-	-	-	With Lead	With Lead	With Lead	With Lead	Sharp Edge	With Lead	Sharp Edge	Sharp Edge	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	Sharp Edge	With Lead
Torsion Angle (θ)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Weak torsion (15˚ to 25˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Variable lead	-	-	-	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	High Helix (45˚ to 60˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	-	-	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)

Filter by:

Stock

- Show only stock items
Clear

Blade diameter (D)(φ)
- 0.01～0.99
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.05
  - 0.06
  - 0.07
  - 0.08
  - 0.09
  - 0.1
  - 0.11
  - 0.12
  - 0.13
  - 0.14
  - 0.15
  - 0.16
  - 0.17
  - 0.18
  - 0.19
  - 0.2
  - 0.21
  - 0.22
  - 0.23
  - 0.24
  - 0.25
  - 0.26
  - 0.27
  - 0.28
  - 0.29
  - 0.3
  - 0.31
  - 0.32
  - 0.33
  - 0.34
  - 0.35
  - 0.36
  - 0.37
  - 0.38
  - 0.39
  - 0.4
  - 0.41
  - 0.42
  - 0.43
  - 0.44
  - 0.45
  - 0.46
  - 0.47
  - 0.48
  - 0.49
  - 0.5
  - 0.51
  - 0.52
  - 0.53
  - 0.54
  - 0.55
  - 0.56
  - 0.57
  - 0.58
  - 0.59
  - 0.6
  - 0.61
  - 0.62
  - 0.63
  - 0.64
  - 0.65
  - 0.66
  - 0.67
  - 0.68
  - 0.69
  - 0.7
  - 0.71
  - 0.72
  - 0.73
  - 0.74
  - 0.75
  - 0.76
  - 0.77
  - 0.78
  - 0.79
  - 0.8
  - 0.81
  - 0.82
  - 0.83
  - 0.84
  - 0.85
  - 0.86
  - 0.87
  - 0.88
  - 0.89
  - 0.9
  - 0.91
  - 0.92
  - 0.93
  - 0.94
  - 0.95
  - 0.96
  - 0.97
  - 0.98
  - 0.99
- 1～1.99
  - 1
  - 1.01
  - 1.02
  - 1.03
  - 1.04
  - 1.05
  - 1.06
  - 1.07
  - 1.08
  - 1.09
  - 1.1
  - 1.11
  - 1.12
  - 1.13
  - 1.14
  - 1.15
  - 1.16
  - 1.17
  - 1.18
  - 1.19
  - 1.2
  - 1.21
  - 1.22
  - 1.23
  - 1.24
  - 1.25
  - 1.26
  - 1.27
  - 1.28
  - 1.29
  - 1.3
  - 1.31
  - 1.32
  - 1.33
  - 1.34
  - 1.35
  - 1.36
  - 1.37
  - 1.38
  - 1.39
  - 1.4
  - 1.41
  - 1.42
  - 1.43
  - 1.44
  - 1.45
  - 1.46
  - 1.47
  - 1.48
  - 1.49
  - 1.5
  - 1.51
  - 1.52
  - 1.53
  - 1.54
  - 1.55
  - 1.56
  - 1.57
  - 1.58
  - 1.59
  - 1.6
  - 1.61
  - 1.62
  - 1.63
  - 1.64
  - 1.65
  - 1.66
  - 1.67
  - 1.68
  - 1.69
  - 1.7
  - 1.71
  - 1.72
  - 1.73
  - 1.74
  - 1.75
  - 1.76
  - 1.77
  - 1.78
  - 1.79
  - 1.8
  - 1.81
  - 1.82
  - 1.83
  - 1.84
  - 1.85
  - 1.86
  - 1.87
  - 1.88
  - 1.89
  - 1.9
  - 1.91
  - 1.92
  - 1.93
  - 1.94
  - 1.95
  - 1.96
  - 1.97
  - 1.98
  - 1.99
- 2～2.99
  - 2
  - 2.01
  - 2.02
  - 2.03
  - 2.04
  - 2.05
  - 2.06
  - 2.07
  - 2.08
  - 2.09
  - 2.1
  - 2.11
  - 2.12
  - 2.13
  - 2.14
  - 2.15
  - 2.16
  - 2.17
  - 2.18
  - 2.19
  - 2.2
  - 2.21
  - 2.22
  - 2.23
  - 2.24
  - 2.25
  - 2.26
  - 2.27
  - 2.28
  - 2.29
  - 2.3
  - 2.31
  - 2.32
  - 2.33
  - 2.34
  - 2.35
  - 2.36
  - 2.37
  - 2.38
  - 2.39
  - 2.4
  - 2.41
  - 2.42
  - 2.43
  - 2.44
  - 2.45
  - 2.46
  - 2.47
  - 2.48
  - 2.49
  - 2.5
  - 2.51
  - 2.52
  - 2.53
  - 2.54
  - 2.55
  - 2.56
  - 2.57
  - 2.58
  - 2.59
  - 2.6
  - 2.61
  - 2.62
  - 2.63
  - 2.64
  - 2.65
  - 2.66
  - 2.67
  - 2.68
  - 2.69
  - 2.7
  - 2.71
  - 2.72
  - 2.73
  - 2.74
  - 2.75
  - 2.76
  - 2.77
  - 2.78
  - 2.79
  - 2.8
  - 2.81
  - 2.82
  - 2.83
  - 2.84
  - 2.85
  - 2.86
  - 2.87
  - 2.88
  - 2.89
  - 2.9
  - 2.91
  - 2.92
  - 2.93
  - 2.94
  - 2.95
  - 2.96
  - 2.97
  - 2.98
  - 2.99
- 3～3.99
  - 3
  - 3.01
  - 3.02
  - 3.03
  - 3.04
  - 3.05
  - 3.06
  - 3.07
  - 3.08
  - 3.09
  - 3.1
  - 3.11
  - 3.12
  - 3.13
  - 3.14
  - 3.15
  - 3.16
  - 3.17
  - 3.175
  - 3.18
  - 3.19
  - 3.2
  - 3.21
  - 3.22
  - 3.23
  - 3.24
  - 3.25
  - 3.26
  - 3.27
  - 3.28
  - 3.29
  - 3.3
  - 3.31
  - 3.32
  - 3.33
  - 3.34
  - 3.35
  - 3.36
  - 3.37
  - 3.38
  - 3.39
  - 3.4
  - 3.41
  - 3.42
  - 3.43
  - 3.44
  - 3.45
  - 3.46
  - 3.47
  - 3.48
  - 3.49
  - 3.5
  - 3.51
  - 3.52
  - 3.53
  - 3.54
  - 3.55
  - 3.56
  - 3.57
  - 3.58
  - 3.59
  - 3.6
  - 3.61
  - 3.62
  - 3.63
  - 3.64
  - 3.65
  - 3.66
  - 3.67
  - 3.68
  - 3.69
  - 3.7
  - 3.71
  - 3.72
  - 3.73
  - 3.74
  - 3.75
  - 3.76
  - 3.77
  - 3.78
  - 3.79
  - 3.8
  - 3.81
  - 3.82
  - 3.83
  - 3.84
  - 3.85
  - 3.86
  - 3.87
  - 3.88
  - 3.89
  - 3.9
  - 3.91
  - 3.92
  - 3.93
  - 3.94
  - 3.95
  - 3.96
  - 3.97
  - 3.98
  - 3.99
- 4～4.99
  - 4
  - 4.01
  - 4.02
  - 4.03
  - 4.04
  - 4.05
  - 4.06
  - 4.07
  - 4.08
  - 4.09
  - 4.1
  - 4.11
  - 4.12
  - 4.13
  - 4.14
  - 4.15
  - 4.16
  - 4.17
  - 4.18
  - 4.19
  - 4.2
  - 4.21
  - 4.22
  - 4.23
  - 4.24
  - 4.25
  - 4.26
  - 4.27
  - 4.28
  - 4.29
  - 4.3
  - 4.31
  - 4.32
  - 4.33
  - 4.34
  - 4.35
  - 4.36
  - 4.37
  - 4.38
  - 4.39
  - 4.4
  - 4.41
  - 4.42
  - 4.43
  - 4.44
  - 4.45
  - 4.46
  - 4.47
  - 4.48
  - 4.49
  - 4.5
  - 4.51
  - 4.52
  - 4.53
  - 4.54
  - 4.55
  - 4.56
  - 4.57
  - 4.58
  - 4.59
  - 4.6
  - 4.61
  - 4.62
  - 4.63
  - 4.64
  - 4.65
  - 4.66
  - 4.67
  - 4.68
  - 4.69
  - 4.7
  - 4.71
  - 4.72
  - 4.73
  - 4.74
  - 4.75
  - 4.76
  - 4.77
  - 4.78
  - 4.79
  - 4.8
  - 4.81
  - 4.82
  - 4.83
  - 4.84
  - 4.85
  - 4.86
  - 4.87
  - 4.88
  - 4.89
  - 4.9
  - 4.91
  - 4.92
  - 4.93
  - 4.94
  - 4.95
  - 4.96
  - 4.97
  - 4.98
  - 4.99
- 5～5.99
  - 5
  - 5.01
  - 5.02
  - 5.03
  - 5.04
  - 5.05
  - 5.06
  - 5.07
  - 5.08
  - 5.09
  - 5.1
  - 5.11
  - 5.12
  - 5.13
  - 5.14
  - 5.15
  - 5.16
  - 5.17
  - 5.18
  - 5.19
  - 5.2
  - 5.21
  - 5.22
  - 5.23
  - 5.24
  - 5.25
  - 5.26
  - 5.27
  - 5.28
  - 5.29
  - 5.3
  - 5.31
  - 5.32
  - 5.33
  - 5.34
  - 5.35
  - 5.36
  - 5.37
  - 5.38
  - 5.39
  - 5.4
  - 5.41
  - 5.42
  - 5.43
  - 5.44
  - 5.45
  - 5.46
  - 5.47
  - 5.48
  - 5.49
  - 5.5
  - 5.51
  - 5.52
  - 5.53
  - 5.54
  - 5.55
  - 5.56
  - 5.57
  - 5.58
  - 5.59
  - 5.6
  - 5.61
  - 5.62
  - 5.63
  - 5.64
  - 5.65
  - 5.66
  - 5.67
  - 5.68
  - 5.69
  - 5.7
  - 5.71
  - 5.72
  - 5.73
  - 5.74
  - 5.75
  - 5.76
  - 5.77
  - 5.78
  - 5.79
  - 5.8
  - 5.81
  - 5.82
  - 5.83
  - 5.84
  - 5.85
  - 5.86
  - 5.87
  - 5.88
  - 5.89
  - 5.9
  - 5.91
  - 5.92
  - 5.93
  - 5.94
  - 5.95
  - 5.96
  - 5.97
  - 5.98
  - 5.99
- 6～6.9
  - 6
  - 6.01
  - 6.05
  - 6.1
  - 6.2
  - 6.25
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.57
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.99
  - 7
  - 7.01
  - 7.02
  - 7.03
  - 7.04
  - 7.05
  - 7.06
  - 7.07
  - 7.08
  - 7.09
  - 7.1
  - 7.11
  - 7.12
  - 7.13
  - 7.14
  - 7.15
  - 7.16
  - 7.17
  - 7.18
  - 7.19
  - 7.2
  - 7.21
  - 7.22
  - 7.23
  - 7.24
  - 7.25
  - 7.26
  - 7.27
  - 7.28
  - 7.29
  - 7.3
  - 7.31
  - 7.32
  - 7.33
  - 7.34
  - 7.35
  - 7.36
  - 7.37
  - 7.38
  - 7.39
  - 7.4
  - 7.41
  - 7.42
  - 7.43
  - 7.44
  - 7.45
  - 7.46
  - 7.47
  - 7.48
  - 7.49
  - 7.5
  - 7.51
  - 7.52
  - 7.53
  - 7.54
  - 7.55
  - 7.56
  - 7.57
  - 7.58
  - 7.59
  - 7.6
  - 7.61
  - 7.62
  - 7.63
  - 7.64
  - 7.65
  - 7.66
  - 7.67
  - 7.68
  - 7.69
  - 7.7
  - 7.71
  - 7.72
  - 7.73
  - 7.74
  - 7.75
  - 7.76
  - 7.77
  - 7.78
  - 7.79
  - 7.8
  - 7.81
  - 7.82
  - 7.83
  - 7.84
  - 7.85
  - 7.86
  - 7.87
  - 7.88
  - 7.89
  - 7.9
  - 7.91
  - 7.92
  - 7.93
  - 7.94
  - 7.95
  - 7.96
  - 7.97
  - 7.98
  - 7.99
- 8～8.9
  - 8
  - 8.01
  - 8.02
  - 8.1
  - 8.15
  - 8.2
  - 8.21
  - 8.25
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.75
  - 8.8
  - 8.9
- 9～9.99
  - 9
  - 9.01
  - 9.02
  - 9.03
  - 9.04
  - 9.05
  - 9.06
  - 9.07
  - 9.08
  - 9.09
  - 9.1
  - 9.11
  - 9.12
  - 9.13
  - 9.14
  - 9.15
  - 9.16
  - 9.17
  - 9.18
  - 9.19
  - 9.2
  - 9.21
  - 9.22
  - 9.23
  - 9.24
  - 9.25
  - 9.26
  - 9.27
  - 9.28
  - 9.29
  - 9.3
  - 9.31
  - 9.32
  - 9.33
  - 9.34
  - 9.35
  - 9.36
  - 9.37
  - 9.38
  - 9.39
  - 9.4
  - 9.41
  - 9.42
  - 9.43
  - 9.44
  - 9.45
  - 9.46
  - 9.47
  - 9.48
  - 9.49
  - 9.5
  - 9.51
  - 9.52
  - 9.53
  - 9.54
  - 9.55
  - 9.56
  - 9.57
  - 9.58
  - 9.59
  - 9.6
  - 9.61
  - 9.62
  - 9.63
  - 9.64
  - 9.65
  - 9.66
  - 9.67
  - 9.68
  - 9.69
  - 9.7
  - 9.71
  - 9.72
  - 9.73
  - 9.74
  - 9.75
  - 9.76
  - 9.77
  - 9.78
  - 9.79
  - 9.8
  - 9.81
  - 9.82
  - 9.83
  - 9.84
  - 9.85
  - 9.86
  - 9.87
  - 9.88
  - 9.89
  - 9.9
  - 9.91
  - 9.92
  - 9.93
  - 9.94
  - 9.95
  - 9.96
  - 9.97
  - 9.98
  - 9.99
- 10～10.9
  - 10
  - 10.1
  - 10.15
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.99
  - 11
  - 11.01
  - 11.02
  - 11.03
  - 11.04
  - 11.05
  - 11.06
  - 11.07
  - 11.08
  - 11.09
  - 11.1
  - 11.11
  - 11.12
  - 11.13
  - 11.14
  - 11.15
  - 11.16
  - 11.17
  - 11.18
  - 11.19
  - 11.2
  - 11.21
  - 11.22
  - 11.23
  - 11.24
  - 11.25
  - 11.26
  - 11.27
  - 11.28
  - 11.29
  - 11.3
  - 11.31
  - 11.32
  - 11.33
  - 11.34
  - 11.35
  - 11.36
  - 11.37
  - 11.38
  - 11.39
  - 11.4
  - 11.41
  - 11.42
  - 11.43
  - 11.44
  - 11.45
  - 11.46
  - 11.47
  - 11.48
  - 11.49
  - 11.5
  - 11.51
  - 11.52
  - 11.53
  - 11.54
  - 11.55
  - 11.56
  - 11.57
  - 11.58
  - 11.59
  - 11.6
  - 11.61
  - 11.62
  - 11.63
  - 11.64
  - 11.65
  - 11.66
  - 11.67
  - 11.68
  - 11.69
  - 11.7
  - 11.71
  - 11.72
  - 11.73
  - 11.74
  - 11.75
  - 11.76
  - 11.77
  - 11.78
  - 11.79
  - 11.8
  - 11.81
  - 11.82
  - 11.83
  - 11.84
  - 11.85
  - 11.86
  - 11.87
  - 11.88
  - 11.89
  - 11.9
  - 11.91
  - 11.92
  - 11.93
  - 11.94
  - 11.95
  - 11.96
  - 11.97
  - 11.98
  - 11.99
- 12～12.9
  - 12
  - 12.1
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.9
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
  - 13.9
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.99
  - 15
  - 15.1
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.51
  - 15.52
  - 15.53
  - 15.54
  - 15.55
  - 15.56
  - 15.57
  - 15.58
  - 15.59
  - 15.6
  - 15.61
  - 15.62
  - 15.63
  - 15.64
  - 15.65
  - 15.66
  - 15.67
  - 15.68
  - 15.69
  - 15.7
  - 15.71
  - 15.72
  - 15.73
  - 15.74
  - 15.75
  - 15.76
  - 15.77
  - 15.78
  - 15.79
  - 15.8
  - 15.81
  - 15.82
  - 15.83
  - 15.84
  - 15.85
  - 15.86
  - 15.87
  - 15.88
  - 15.89
  - 15.9
  - 15.91
  - 15.92
  - 15.93
  - 15.94
  - 15.95
  - 15.96
  - 15.97
  - 15.98
  - 15.99
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.5
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.7
  - 18.8
  - 18.9
- 19～19.99
  - 19
  - 19..5
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.51
  - 19.52
  - 19.53
  - 19.54
  - 19.55
  - 19.56
  - 19.57
  - 19.58
  - 19.59
  - 19.6
  - 19.61
  - 19.62
  - 19.63
  - 19.64
  - 19.65
  - 19.66
  - 19.67
  - 19.68
  - 19.69
  - 19.7
  - 19.71
  - 19.72
  - 19.73
  - 19.74
  - 19.75
  - 19.76
  - 19.77
  - 19.78
  - 19.79
  - 19.8
  - 19.81
  - 19.82
  - 19.83
  - 19.84
  - 19.85
  - 19.86
  - 19.87
  - 19.88
  - 19.89
  - 19.9
  - 19.91
  - 19.92
  - 19.93
  - 19.94
  - 19.95
  - 19.96
  - 19.97
  - 19.98
  - 19.99
- 20～20.5
  - 20
  - 20.5
- 21～21.5
  - 21
  - 21.5
- 22～22.5
  - 22
  - 22.5
- 23～23.5
  - 23
  - 23.5
- 24～24.5
  - 24
  - 24.5
- 25～25.5
  - 25
  - 25.5
- 26～26.5
  - 26
  - 26.5
- 27～27.5
  - 27
  - 27.5
- 28～28.5
  - 28
  - 28.5
- 29～29.5
  - 29
  - 29.5
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
Drawing

Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel: to HRC55
- High Hardness Steel: to HRC60
- High Hardness Steel: to HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Blade length (ℓ)(mm)
- 0.01～0.9
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.045
  - 0.05
  - 0.06
  - 0.07
  - 0.075
  - 0.08
  - 0.09
  - 0.1
  - 0.105
  - 0.12
  - 0.135
  - 0.15
  - 0.16
  - 0.2
  - 0.23
  - 0.24
  - 0.25
  - 0.3
  - 0.32
  - 0.4
  - 0.45
  - 0.5
  - 0.6
  - 0.7
  - 0.75
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.05
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.35
  - 1.4
  - 1.5
  - 1.6
  - 1.7
  - 1.75
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.96
  - 3
  - 3.1
  - 3.18
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.75
  - 3.8
  - 3.9
  - 3.96
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.78
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.25
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.1
  - 6.2
  - 6.25
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.9
  - 7
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.25
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.52
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.49
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12～12.9
  - 12
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.8
  - 12.9
- 13～13.8
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.9
  - 15
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.6
  - 15.8
  - 15.9
- 16～16.8
  - 16
  - 16.2
  - 16.4
  - 16.5
  - 16.6
  - 16.8
- 17～17.8
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.5
  - 17.6
  - 17.7
  - 17.8
- 18～18.8
  - 18
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.8
- 19～19.8
  - 19
  - 19.2
  - 19.4
  - 19.5
  - 19.6
  - 19.8
- 20～20.8
  - 20
  - 20.1
  - 20.2
  - 20.3
  - 20.4
  - 20.5
  - 20.6
  - 20.7
  - 20.8
- 21～21.9
  - 21
  - 21.2
  - 21.3
  - 21.4
  - 21.5
  - 21.6
  - 21.8
  - 21.9
- 22～22.8
  - 22
  - 22.2
  - 22.4
  - 22.5
  - 22.6
  - 22.8
- 23～23.8
  - 23
  - 23.1
  - 23.2
  - 23.3
  - 23.4
  - 23.5
  - 23.6
  - 23.8
- 24～24.9
  - 24
  - 24.2
  - 24.3
  - 24.4
  - 24.5
  - 24.6
  - 24.8
  - 24.9
- 25～25.8
  - 25
  - 25.2
  - 25.4
  - 25.5
  - 25.6
  - 25.8
- 26～26.8
  - 26
  - 26.2
  - 26.4
  - 26.5
  - 26.6
  - 26.7
  - 26.8
- 27～27.9
  - 27
  - 27.2
  - 27.3
  - 27.4
  - 27.5
  - 27.6
  - 27.8
  - 27.9
- 28～28.8
  - 28
  - 28.2
  - 28.4
  - 28.5
  - 28.8
- 29～29.8
  - 29
  - 29.1
  - 29.2
  - 29.5
  - 29.6
  - 29.7
  - 29.8
- 30～30.9
  - 30
  - 30.3
  - 30.4
  - 30.5
  - 30.6
  - 30.8
  - 30.9
- 31～31.8
  - 31
  - 31.2
  - 31.5
  - 31.6
  - 31.8
- 32～32.8
  - 32
  - 32.1
  - 32.4
  - 32.5
  - 32.7
  - 32.8
- 33～33.9
  - 33
  - 33.2
  - 33.3
  - 33.6
  - 33.9
- 34～34.8
  - 34
  - 34.2
  - 34.4
  - 34.5
  - 34.8
- 35～35.8
  - 35
  - 35.1
  - 35.2
  - 35.4
  - 35.5
  - 35.6
  - 35.7
  - 35.8
- 36～36.8
  - 36
  - 36.4
  - 36.5
  - 36.8
- 37～37.6
  - 37
  - 37.2
  - 37.5
  - 37.6
- 38～38.8
  - 38
  - 38.4
  - 38.5
  - 38.8
- 39～39.6
  - 39
  - 39.2
  - 39.5
  - 39.6
- 40～40.8
  - 40
  - 40.4
  - 40.5
  - 40.8
- 41～41.6
  - 41
  - 41.2
  - 41.5
  - 41.6
- 42～42.8
  - 42
  - 42.4
  - 42.5
  - 42.8
- 43～43.6
  - 43
  - 43.2
  - 43.5
  - 43.6
- 44～44.8
  - 44
  - 44.4
  - 44.5
  - 44.8
- 45～45.5
  - 45
  - 45.2
  - 45.5
- 46～46.8
  - 46
  - 46.4
  - 46.5
  - 46.8
- 47～47.8
  - 47
  - 47.2
  - 47.5
  - 47.6
  - 47.8
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50～50.5
  - 50
  - 50.5
- 51～51.5
  - 51
  - 51.5
- 52
- 53～53.5
  - 53
  - 53.5
- 54～54.5
  - 54
  - 54.5
- 55～55.5
  - 55
  - 55.5
- 56
- 57.5
- 58～58.5
  - 58
  - 58.5
- 59～59.5
  - 59
  - 59.5
- 60～60.5
  - 60
  - 60.5
- 63
- 64
- 65
- 67
- 70～70.5
  - 70
  - 70.5
- 75
- 80
- 83
- 85
- 90
- 95
- 100
- 103
- 106
- 110
- 112
- 120
- 130
- 150
- 200
[4-60/1mm Unit(s)]

Drawing

Clear

Number of flutes(sheet)
1

2

3

4

5

6

8

10

12

14

16
Clear

Type
- Square
- Roughing
- Long-Neck Square
- High Helical
Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- CrN
- Dia Coat
- Non-Coated
- DG
Details

Clear

Shank diameter (d)(mm)
1

1.5

2

2.9

3

3.175

3.8

4

4.8

5

5.8

6

6.35

7

7.8

8

9

9.53

9.7

10

11

11.7

12

13

14

15

15.5

15.7

16

17

18

19.3

19.7

20

24.2

25

30

32

42
Drawing

Clear

Overall Length (L)(mm)
30

35

36

37

38

38.1

39

40

42

43

45

48

49

50

51

52

53

54

55

57

58

60

62

63

63.5

65

66

67

68

70

72

73

74

75

76

79

80

82

83

84

85

86

87

88

89

90

92

93

95

97

99

100

104

105

107

108

109

110

111

112

113

115

118

120

121

123

124

125

126

128

130

135

140

145

150

155

156

160

165

170

175

180

190

200

210

220

225

230

240

250

260

270

280

300

310

320

350
Drawing

Clear

Underneck length (ℓ1)(mm)
- 0.1～0.8
  - 0.1
  - 0.2
  - 0.3
  - 0.4
  - 0.5
  - 0.6
  - 0.75
  - 0.8
- 1～1.8
  - 1
  - 1.2
  - 1.25
  - 1.5
  - 1.6
  - 1.8
- 2～2.5
  - 2
  - 2.4
  - 2.5
- 3～3.8
  - 3
  - 3.2
  - 3.5
  - 3.8
- 4～4.5
  - 4
  - 4.5
- 5
- 6
- 7.5
- 8
- 9～9.5
  - 9
  - 9.5
- 10～10.5
  - 10
  - 10.5
- 12～12.5
  - 12
  - 12.5
- 13～13.5
  - 13
  - 13.5
- 14
- 15
- 16～16.5
  - 16
  - 16.5
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 58
- 60
- 62
- 64
- 65
- 66
- 67
- 70
- 74
- 76
- 79
- 80
- 82
- 85
- 94
- 99
- 100
- 120
- 125
- 130
- 150
- 200
[15-92/1mm Unit(s)]

Drawing

Clear